HOW TO RESPRAY A BAD PAINT JOB | BLENDING SILVER | PART 2 THE SPRAYING | RANGE ROVER VELAR .......

[@Garage-paintjob]

I saw your paint room and noticed you have so many beautiful paint guns, I’m really impressed. I wish I could get some like that for myself 😍😍

[@markashby9120]

love a good waffle Jason, top notch job again 👌

[@grantssmartrepairs]

came out great and looks how it should now 😂😂😂 they will be happy with that great job 👍👍👍👍

[@Badger66]

Love the background to how and why you do things, such an expert in what you do.... deserve more subscribers and a bigger unit! LOL

[@TheHumblePaintSprayer333]

I appreciate that! thank you

[@jasonstevens2388]

Creeeeeaaaaammmmmeeeerrrrrrr!!!😅

[@JohnWD40TC02]

Hi Jason, very interesting video again mate the Range Rover looks like new again just like you were never there which is how it should be unlike the last person that made a right mess of it🙄🤭 I might have mentioned this before but if you look at the 1.3CC tip then compare it with the 1.2i (or O) tip you should see that the 1.3CC is smaller than the 1.2i🤔someone I know has the tools to measure an internal diameter and he told me the 1.3CC is actually 1.15mm🤷‍♂I've been experimenting using the 1.2i and the 1.3i tip (I don't have the O tip but both tips are the same it's the aircap that changes the fan pattern) with the CC aircap and it speeds the gun up but it still produces the same CC finish, maybe it's something that would help you Jason👍

[@vincetaylor944]

Great job Jason, You turned a Dogs dinner into a Michelin star meal ! Thanks for sharing as always mate. Cheers Vince.

[@aksmartrepairsltd]

Nice job! I recently used the 4+1 as a WoW after always using the F37 WoW and I found the 4+1 WoW actually lays flatter than the F37. It's now my go to.

[@TheHumblePaintSprayer333]

Many thanks, yes I use it often as WoW but I do prefer F37 for new panels it’s has better adhesion properties and anti corrosion for new panels, it will bond to factory e coat without sanding but it does take a lot longer to dry and needs to be applied really wet to be smooth Do you use the VR thinner in the 4+1 WoW

[@aksmartrepairsltd]

@@TheHumblePaintSprayer333 Yeah, the VR thinner is brilliant. I still use the F37 when required although I do still key up new e-coat just for my own peace of mind. My only annoyance with F37 is the lack of spectral grey shades. I would prefer they made it in just black and white so you can then make your grey shades.

[@billsheehy1660]

Made it brand new again, I enjoy the talk plenty to take on board. Thanks

[@bigsquatchsasfoot1964]

Looks like new again to me J 👌 the customer will think you’ve give um the wrong car back compared to how you got it ! Super job dude 👍

[@TheHumblePaintSprayer333]

Cheers Mukka thanks again for watching 👍

[@TheSparkysdog]

Great video, really enjoying all the uploads, thank you 👍

[@TheHumblePaintSprayer333]

Glad you enjoy it! 👍cheers

[@JonathanCox94]

Nice job, I do have to agree with you with the CC setup it depends on the clear but it is slow and can look dry, I know you don’t want to try many other guns but I do urge you to try the WS400 series 2 for clear you’ll be amazed by the results

[@richweston6202]

Brilliant and I really enjoy your " waffle " I always learn lots! Love this channel

[@TheHumblePaintSprayer333]

Thanks so much!

[@theessexhunter1305]

what we did back in the day with 2-1 10% and a stick and jga 54 was just mad to what you do lol

[@TheHumblePaintSprayer333]

👍 you keep getting me reminiscing 😂👍

[@theessexhunter1305]

@@TheHumblePaintSprayer333Easy as you might well be older like me lol

[@andrewodonoghue8666]

Yes great job ! love the waffle very informative .Keep them coming.

[@TheHumblePaintSprayer333]

Thank you! Will do!

[@thetriggerman954]

Excellent finish. That must have been the range Rover I painted last year. Thank you for fixing my bad paint job 😉 very nice work my man. I watched part 1 yesterday. If you think that CC gun is slow. Try the DV1 you will fall asleep while painting. 🤝♥️

[@TheHumblePaintSprayer333]

It was ok like i said in the video i didn't get the finish i wanted on this one, it was a bit light for my liking, we like a lot of clear on them don't we 😄 Man that wasn't your standard of work dont be silly 😂 you paint what your asked paint and you do it right and consistently high standard, i can see your very efficient and fast and you must be a real asset to your boss ive worked at many places where other parts of the job might not be repaired very well or not been stripped and id just paint it to my best ability thats all you can do , wasn't my department Its different for me here as I'm being paid for the job Thanks Man 👍

[@Mfull-l4r]

Hey Trig Unsubscribed 😂

[@thetriggerman954]

@@Mfull-l4r 🥹 that's cold my man that's cold 🥶 😂😂💪🏼💪🏼

[@thetriggerman954]

@@TheHumblePaintSprayer333 man every time I try to leave my job the boss tells me NO YOU CANT LEAVE, and gives me more money. Right now there is not a shop in the county that can pay me more than what my boss pays me. He is wealthy and he just doesn't want to retire and stay home with his wife, he's 70 and just loves to be in the shop. I have offers to work at so many high end shops here locally. But he pays me too good to leave. And I work 8-4 no weekends. Love it 🤎 but I know what you mean you're your own boss so you have no choice but to give 100%

[@Mfull-l4r]

@@thetriggerman954 😂😂😂

[@Mfull-l4r]

Hi bud nice work, have you tried cx11 its so thin it's like water....I ended up sacking a full pack off, the worst mipa ever..... but Cx4 I love that. I dropped using thinners in my clear a few years ago, better gloss less runs, just nib and trizact my clears if a little too peely.

[@TheHumblePaintSprayer333]

Thank you, no haven’t used CX11 I’m trying a new clear tomorrow on a job CC14 Thix, I like cx4 it’s good apart from the small polishing window, I use cx2 instead now it’s good for the price fast cure like the cx4 and very good gloss Clears without thinners are better one less thing to influence your end result

[@phil25051]

Nice Job

[@phil25051]

Hi, where are you based? and how busy are you? I have a Mercedes Clk55 amg in need of some paint correction, front bumper and bonnet painting. General tidy up. Let me know cheers Phil.

[@robertk5428]

Thank you for video👌

[@TheHumblePaintSprayer333]

My pleasure thanks for watching 👀 👍

[@pauldevine2932]

Been spraying for 30 years myself and that how I would have done that job 😊

[@TheHumblePaintSprayer333]

👍

[@uranobnut]

Excellent job sir

[@TheHumblePaintSprayer333]

Many thanks 🙏

[@davidsweet8829]

Super job. A joy to watch.

[@TheHumblePaintSprayer333]

Thank you! Cheers!

[@peterstorey4360]

nice job what is going rate to spray full car 520d carbon black 62 plate thanks

[@TheHumblePaintSprayer333]

Sorry there's no set price to paint a whole car

[@jamesr8897]

👍🏻👌🏻

[@JF-bk5sp]

Hi Jay what basecoat blender do you recommend for using with octoral eco? I’ve got an old E36 in titan silver coming up which seems to be a different shade on each panel 😅 thanks! Great job on this by the way!

[@TheHumblePaintSprayer333]

it uses the transparent base coat tinter thats used for the 3 stage tricoat and pearl coats it also gives you the option when you mix the colour to add it to the mix if your blending it, i can't remember the tinter number, put 1 coat on then dry it before base coating

[@JF-bk5sp]

@@TheHumblePaintSprayer333 I’m sure it’s W23 but I’ll call the rep this week to be 100% certain. thanks for replying!

[@TheHumblePaintSprayer333]

@@JF-bk5sp Yes it is, quite often used debeer tinters so had to cross reference the numbers

[@ANDY-we7mr]

NOW JAY I HAVE SOME MIPA HS LOSER BLENDER DOES MIPA FAST THINNER HAS TO BE USED WITH IT OR CAN I PUT IT STRAIGHT ON NO MIXING REQUIRED 😊

[@TheHumblePaintSprayer333]

What you using it for, HS LOSER is just fade out thinner for blending 2k clear and direct gloss you dont need to add thinner to thinner mate

[@ANDY-we7mr]

@@TheHumblePaintSprayer333 Jay you know I have have had nightmare trying to match the base coat paint on my bumper on ford focus mk3 titanium x I have DA sander the whole bonnet yesterday with 320 grit and used a scotch pad so can I Jay wipe the bonnet down mate solvent paint wipe and apply Mipa HS LOSER AND THE BASE COAT PAINT AND CLEAR COAT PAINT AND THATS IT AND THE SAME TO THE BUMPER

[@TheHumblePaintSprayer333]

@@ANDY-we7mr You don't need to put HS LOSER on it, thats for fading out 2k clear and direct gloss in to existing paint work it not for base coat to go over

[@TheHumblePaintSprayer333]

@@ANDY-we7mr No don't put HS loser on the panels before base coat

[@ANDY-we7mr]

​1:19 ​​@@TheHumblePaintSprayer333 NO JAY THE BONNET HAS BEEN PREPED FOR BASE COAT PAINT SOLVENT I WAS JUST GOING TO GIVE IT A LIGHT SPRAY BLENDER OVER THE BONNET AND THEN SOLVENT BASE COAT PAINT ON THEN CLEAR COAT PAINT JAY I HAVE SOME BASE COAT PAINT BLENDER PRO SPRAY CAN I USED THAT SAYS FOR BASE COAT PAINT

[@juhis6969]

What you put between fender and door? Thats sometimes so difficult to mask😟

[@TheHumblePaintSprayer333]

I get tape in where i can, but most cars its just a dry over spray coat in the anyway from factory so i just let the overspray go in there, if there's trims in there i do my best to mask them off but can't always

[@juhis6969]

@@TheHumblePaintSprayer333 thanks, thats what i tried to do also. Just cleaning and blowing all that shit over there before painting🤷🏼‍♂️

[@akaeric2]

What exactly is wet on wet primer a opposed to ordinary primer?.

[@TheHumblePaintSprayer333]

Its just 1 thin coat of primer opposed to a build up of primer layers that paint can be sprayed directly on top of without the need to sand, its just a sealing or barrier coat

[@phil25051]

@phil25051 53 minutes ago Hi, where are you based? and how busy are you? I have a Mercedes Clk55 amg in need of some paint correction, front bumper and bonnet painting. General tidy up. Let me know cheers Phil.

[@TheHumblePaintSprayer333]

You can email me it’s on the channel home page if you want 👍