How To Restore Bike Paint At Home | Bike Paint Correction | Quick Drying Acrylic Spray Paint

HOW TO REPLACE BIKE LOCK SET-
• how to replace bike lo...
In this video, I have shown the easiest and cheapest way in which you can restore your bike's worn out paint, (Restore your bike's old paint) at home using a very few tools.
As an automotive enthusiast I know how much you love your car and bike, so why not keep it new?
When that can be done only by spending a dyne!
The spray paint can be easily found at your local hardware store, along with emery papers(sandpapers).
So get going and do this awesome DIY and make yourself proud.
Though I am giving Amazon link to the spray paint, I have not tried the same. And you can find cheaper and better spray paint offline.
Link- amzn.to/2QLtSAF
Link to my toolbox small(1/4 inch), tried and tested!
Link- amzn.to/37rDY0e
Link to my toolbox big(1/2 inch), tried and tested!
Link- amzn.to/2SHVvNH
Channel Link- / underthehood
VIDEO CREATOR-
ASDC CERTIFIED AUTOMOTIVE SERVICE TECHNICIAN LEVEL 5
SONG CREDIT-
Meizong - Sound Of Hope: • Meizong - Sound Of Hop...

[@UNDERTHEHOOD]

•••••••••••••••••••••••••••••••• Link To Spray Paint(Not Tried&Tested) Gloss Black (The colour used in video) amzn.to/2QLtSAF Matt Black Colour- amzn.to/37Fhfyr Links to My DIY Tools My Socket Set (Must-have For All your DIY’s) (Tried&Tested) 1/2-inch Socket Set (24-Pieces) amzn.to/2SHVvNH My Socket Set (Must-have For All your DIY’s) (Tried&Tested) 1/4inch amzn.to/37rDY0e Pliers That I Use(Tried&Tested) amzn.to/37tSvZd Claw Hammer That I Use (Tried&Tested) amzn.to/2SL9F0r Chain Lube That I Use amzn.to/37y3xNl Chain Cleaner That I use amzn.to/36ibQwz My DIY scan tool amzn.to/2SUeVz3 •••••••••••••••••••••••••••••••• Links to My Gears- My Action Camera amzn.to/2MNSyaw Water Proof Case That I Use For My Action Camera(quality not Gr8) amzn.to/35igiK4 Action Camera Mountings For Helmet amzn.to/37uZUrj I Use Shifter Helmet (Special edition not available on Amazon) amzn.to/2SMd7Ij The laptop I Use For Editing My Videos amzn.to/2ucs4cm Mic That I Use amzn.to/35b8p9u •••••••••••••••••••••••••••••••• Disclaimer (The above links are Affiliate)

[@VimalRaj-oe8vo]

Uu

[@sasmitasamal7927]

OM SHANTI 🤗🤗😋😋

[@sahildahale3132]

Wkkwi

[@wolwerine0007]

Great Job. I did mine with a Fine paint Brush. Though the finish in yours was much better as it was spray paint.

[@exploRidge]

Did you use enamel oil paint?

[@wolwerine0007]

@@exploRidge Yes I did.

[@exploRidge]

@@wolwerine0007 and how were the results? Did it last? I'm going to try painting some parts with oil paint

[@wolwerine0007]

@@exploRidge They were not as Good as Spray but good enough. Yes they do last.

[@rearrange8319]

These paints comes out easily when petrol spils near tanks while filling petrol on bike when drops some drops

[@RahulMondal-pc3vh]

Don't pour petrol then

[@mjshaheed]

​@@RahulMondal-pc3vh How can we tell that to the petrol punk guy? 😂😂😂

[@raghavms2828]

bro....you should also give clear coating on the top to avoid the paint removal when you water wash the bike and to also protect from sunlight

[@manojraman6445]

Is there any special coating required to keep the paint safe from rain water? If yes then please be kind enough to give the link of such product!🙏☺️

[@raghavms2828]

@@manojraman6445 yeah bro...you should give clear coating after painting the bike.....I am not aware of online clear coating products bro......

[@trueAKspeaks]

I am the first one to hit like on this video, I mean this video got the first like after 1 million views, this man deserves much more than this, I am not even able to maintain the average on 50 views for views on my videos, great stuff!

[@vasanthmech54]

acrylic based is quick dry but its doesnt a scratch resistant after this apply a pp based clear coat like mrf clear will increase the life of base coat and makes ur finish as glossy or matt dnt leav only with acrylic based coat

[@Caveman473]

I'm a detailer too in the northeast region. Good work out there. Primer application would have increased the paint durability.. great job though 👍

[@UNDERTHEHOOD]

Yes brother primer and clear coat would be better but here in India it is difficult to find spary cans of clear and primer. (Atlest where I live)

[@Caveman473]

@@UNDERTHEHOOD true.. Ali express is a good source to get them.. I'm also learning while working. Experience is truly the best teacher 🤠

[@joshmirr7366]

@@Caveman473 what's the proper way of applying primer, paint and clear coat

[@prinsonpjohnson9978]

Can you review after this 2 yrs

[@lenovonewboy8608]

Hearty thanks for uploading such informative video.. 🙂

[@UNDERTHEHOOD]

Thanks a ton 🙌🏻🙌🏻

[@shabdkiran9079]

For how many months it will remain in this condition after spray

[@rajeshkannan4877]

It was really helpful bro ..!🤗 Keep going

[@UNDERTHEHOOD]

Thanks brother 🙌🏻 🙌🏻

[@Monty22181965]

10 rs ka permanent marker ata he vo jyada asan he lgana

[@vikasreddy9962]

Good job bro

[@UNDERTHEHOOD]

Thanks a ton brother 🙌🏻🙌🏻🙌🏻🙌🏻

[@thomasvincent5385]

Well done bro keep it up

[@UNDERTHEHOOD]

Thanks a ton brother! 🙌🏻🙌🏻

[@shreyaagrawal6706]

Amazing yr, all the very best to you.

[@UNDERTHEHOOD]

Thank you..

[@roninr8199]

My pulsar engine and alloy is in grey colour and I want to paint it black. Do I have to use sand paper even for engine bay and alloy?

[@UNDERTHEHOOD]

Sand paper is used to prep the surface so that paint can stick to it. Now I think you get the idea.

[@Officialnikhilsuheja]

Maine sir pulsar handle bar paint krwaya black matt colour usne bola sukne ke baad matt ho jayega aaj pura din dhoop main rakha abhi tak wo shine ker rha hai kya use sukhne main time lgta hai

[@UNDERTHEHOOD]

Bhai sukha nahi ho ga abhi, bec mera almost 2 din lag gya tha, and I also made a mistake where I thought paint would have dried after a day so I touched it, and it had my fingerprints and I had to repaint it, so wait for some more time. It should give your expected results.

[@UNDERTHEHOOD]

Also if u have kept it outside make sure there is no dust around because if that's not the case then the finish will not be upto your expectations.

[@Officialnikhilsuheja]

Maine sara din dhoop main rakha usko use touch kiya tha wo sukh chuka hai nd proper finishing ni aa rhi usme satisfaction wala kaam ni hua

[@Officialnikhilsuheja]

Isse acha main new handle bar le aata company se thn better rhta

[@UNDERTHEHOOD]

I never asked u to do this DIY also I didn't tell u to use matt colour, so what is better and what is not is not my concern.

[@anshatali5156]

Nice work bro

[@UNDERTHEHOOD]

Thanks brother 🙌🏻🙌🏻❤️

[@mayaagrawal8943]

Need a DIY video on custom painting....btw nice video

[@UNDERTHEHOOD]

Will upload 1 for sure someday.. Btw thank you for your feedback.

[@interesting1316]

U r eating so much of paint but great effort And dedication of teaching

[@operarter]

looool!!! you should use a black matte color 4 this paint job

[@UNDERTHEHOOD]

Wow 👌

[@niluagrawal2471]

Nice one...was looking for such a video

[@UNDERTHEHOOD]

Thank you..

[@maeshk5272]

Bro...acrylic paints goes off once it comes in contact with petrol... I ve tried ... after that your bike would look horrible...

[@UNDERTHEHOOD]

Bro I have not painted it on the tank, also the area that I have painted it onto will never contact petrol whatsoever, also brother this is A DIY and u can not expect factory finish.

[@timersvrock]

Get a primer coat on it. Or a clear coat after that problem solved

[@UNDERTHEHOOD]

@@timersvrock yes we can do that Infact this is what should be done! but mostly we won't find clear coat in spary cans in our local hardware store. Also after 8 months the finish is quite nice and i will share the image in the community post.

[@timersvrock]

@@UNDERTHEHOOD sure brother its always awesome ,when its diy.

[@Anandkumar-hz8mn]

Om Shanthi வாழ்க வளமுடன்

[@khamrupatan7609]

for this bike only side one strike is there it looks like old bye when that indecent happens onwords but that bike is new pls show me that bro

[@UNDERTHEHOOD]

I cannot understand what are u actually asking. If you are saying that the model of bike is old then yes it is 2012 model.

[@khamrupatan7609]

@@UNDERTHEHOOD no my bike is pulsar 150 for that bike tank is there know beside of that one small damage is there means strike out like that so if you give any solution to cover that strike out

[@UNDERTHEHOOD]

Yes there are a few solutions, ⚫ If the strike is not very deep and is only on the clear coat then polishing it will remove the scratch. ⚫ Or you can get your tank wrapped ⚫Or if it is a dent then u have to repair the dent and then repaint it, but u will have to take it to a denter and painter in this case.

[@khamrupatan7609]

@@UNDERTHEHOOD yes on strriker and beside of tank

[@labr4t202]

Bro ye paint exhaust pipe me paint kar sakte hai kya? I mean to say that does heat will effect the paint?

[@UNDERTHEHOOD]

It won't work, use silencer paint

[@labr4t202]

@@UNDERTHEHOOD 😱

[@manojpisal]

this paint can stay sticky as it is while wash with petrol or diesel, is that heat log lasting

[@MRPTrader7]

Good info bro

[@Prajinrock]

At first, stop using metal key chains then you don't have to paint it..

[@srasinghania7353]

Sir jee handle me pulsar ki niche kya likha hua mujhe v karni hai please

[@bhavitkanthalia1536]

Very helpful video..... 😀😀😀

[@yy-nf3tp]

Bro... Will it look good with oil paint?

[@rudrasharma8268]

Sir Can We Paint Bike engine with acrylic spray paint Plz reply

[@UNDERTHEHOOD]

No bec this is not a high temp paint! Some people do it but u get my point. It will not be able to withstand the heat generated by the engine.. So pls don't try. U can do it with high heat resistant spray paint, but that too after proper initial prepping of the surface. Atb👍

[@rudrasharma8268]

Can we Do with aerosol spray paint

[@UNDERTHEHOOD]

U know the meaning of aerosol? In that manner the paint i used in the video is also an aerosol, in fact, everything in a can under pressure is aerosol! I said to use a high heat resistant spray which is again an aerosol.

[@manojkorada1446]

Can we do this without removing this part bcz paaint on my bike on tank so it's not easy to remove and paint so advice me right suggestion brother

[@vineshreddy3204]

No bro it's highly tuff

[@nalansworld1208]

good One ,Subscribed

[@UNDERTHEHOOD]

Thanks a ton brother really appreciate it... 🙌🏻🙌🏻🙌🏻🙌🏻🙌🏻

[@mushtaqueshaikh7542]

Acha tha bhai lekin hindi me bolte to acha hota

[@UNDERTHEHOOD]

Bhai yaar purana video ha ye! New videos mostly hindi me hi aa rha ha.

[@m.lakshminarayananlak3798]

U should not paint the machines surface u would mask and paint otherwise friction will go clamping tension will reduce in fork

[@UNDERTHEHOOD]

Not able to understand! Though I have not painted any surfaces that does not have to be.

[@manuprasadmanoj5010]

Is this also apply for silver clr

[@wanttoknow8241]

Full bike bahar se paint karwane mein kitna cost aayega

[@nidhindevassy]

How to understand exact color of my bike to buy the paint...

[@UNDERTHEHOOD]

If u have to paint small parts like this then u can buy generic colours, like black and all but if want to match colour for any specific area then go to an automotive paint shop with a sample and they will make exact colour as u want, if they have an option for making a spray can then that will be awesome but mostly they do not make custom aerosol in india so u have will have to buy paint only, again u won't be able to apply that as it will need expertise. So u will have to go with generic colours and anyways this is jugaad and not factory method. So I hope this answers your questions. 😉

[@nidhindevassy]

@@UNDERTHEHOOD thank you for your concern...

[@Racingpigeon-ef2nl]

Is it Aerosol Spray paint?

[@dhonijosuph5203]

Wow

[@rideandhra2907]

Bajaj need to take it serious bikes coming without quality

[@deepavasan209]

RIDE ANDHRA P2

[@UNDERTHEHOOD]

Link to best CORONA Gears - Face mask that I use- www.amazon.in/gp/product/B08BYCWTP9/ref=cx_skuctr_share?smid=A181JTUTVU6UR1 Nano spray sanitizer - www.amazon.in/gp/product/B08B41K53H/ref=cx_skuctr_share?smid=A181JTUTVU6UR1

[@mathewpothenvarghese6989]

More thick paint not good, because it peeled quality.

[@dpcruiser]

Powder coating will be a good idea?

[@UNDERTHEHOOD]

Yes if you have the equipments

[@dpcruiser]

Thanks

[@istiyabkhan1641]

Nice bro .

[@UNDERTHEHOOD]

Thanks brother ❤️❤️🙌🏻🙌🏻

[@SUPERHERO54321]

GIVE IT TO A PROFESSIONAL, DON'T TRY AT HOME, I WASTED 1000 RUPEES SPRAY BUT IT NEVER GOT PERFECT, THEN I ROMEVED THE PAINT AND GAVE IT TO A PROFESSIONAL FOR 500

[@yogendrasali1986]

Go for vinyl wrapping it will cost less than 40rs, no need to waste so much of time and money

[@rajveercharan4217]

Bhai desert colour m mil jayega kya???

[@UNDERTHEHOOD]

Bhai colours to kafi ata ha iska, offline dekho koi hardware ki shop me,they have a ton of options, online ka not sure. Desert color not sure. Ek bar dekh lo shop pe.

[@royaldavidson766]

Bro, if petrol r diesel falls on it. It will loose the paint r not.

[@UNDERTHEHOOD]

Bro after a few days it is will be like your normal paint you won't even notice, but if you want you can use clear coat spray also available in aerosol.

[@karanamvenkatesh1803]

Right some time it depend selected paint type u need to know...before use....

[@manojkumarmanu4949]

Bro where did you get that sticker you sticked under the lock set?

[@UNDERTHEHOOD]

Bro just google pulsar logo, then download the logo and size it accordingly! And simply print it on a Sticker paper.

[@dat_anonymous_kid]

Where did u get that pulsar sticker ?

[@UNDERTHEHOOD]

Brother just go to google and search for pulsar logo and then resize it and print it on sticker paper. And cut it accordingly and paste it where ever u want.

[@dat_anonymous_kid]

@@UNDERTHEHOOD okay, and thx for your reply😊

[@UNDERTHEHOOD]

❤️❤️

[@reyanshprabhu8444]

Were it is

[@chandmunidevi3558]

You should have used paint remover...

[@zetxinyamra74]

Thanks bro

[@UNDERTHEHOOD]

You're welcome! ❤️❤️🙌🏻🙌🏻🙌🏻

[@mojmarhevujyoty1524]

Petrol se nikal jayega or kitna time chalta hy pls reply me

[@UNDERTHEHOOD]

Nahi nikle ga, kuch din bad it wilp be like normal paint, mera ek sal se uper ho gya abhi tak sahi hai, and you can read other comments where I have already discussed about it

[@Strainjar584]

Dimag to lam haire baba😂

[@soupboy5074]

I have a blue bike bro where can i get orginal colour for it

[@UNDERTHEHOOD]

Go to any automotive paint shop. U should find it. Search on Google automotive paint shop near me and u will be good to go.

[@northeastbasong6967]

Sir can u tell me which spray last for long ..and finest quality

[@UNDERTHEHOOD]

You can try Nippon spary paint.

[@rockysalmankhan2515]

sir it is permanent or not

[@RajuDj502]

Nice

[@ys8691]

Will it fade in the sun or rain?

[@UNDERTHEHOOD]

No

[@dhonijosuph5203]

Tq

[@UNDERTHEHOOD]

Welcome 🙌🏻

[@user-ro2rm4et5j]

हमारी पल्सर की ब्रेक लाइट नहीं जल रही है क्या करना होगा

[@UNDERTHEHOOD]

Check if light has fused or not, if not then check the wiring, mostly the light would have fused.

[@tapankumarpatra2636]

Which paint we should use??

[@UNDERTHEHOOD]

I used a normal gloss black spray paint available at any hardware store and it worked pretty well.

[@UNDERTHEHOOD]

Ideally we should first remove all the paint then apply primer then paint then clear coat, but it is a DIY so...

[@AmitSingh-ec4ms]

Bhai banars me kha se ho ???

[@sonumalviya7946]

Kaha se ho app

[@nandandancer]

Very well

[@rajsaxsena97]

Bro does it comes out when water is poured

[@UNDERTHEHOOD]

No

[@ys8691]

Thanks

[@UNDERTHEHOOD]

🙌🏻🙌🏻🙌🏻

[@ys8691]

@@UNDERTHEHOOD can i paint in sylenser like this

[@UNDERTHEHOOD]

No, use heat resistant paint

[@kiranms3505]

Protect your lungs.

[@tanavpreetsingh6462]

Eh spray paint matt tha ya shine wala

[@UNDERTHEHOOD]

Shine wala tha.

[@mikeparkinson4786]

why would you mask off the lock and then remove it.?

[@UNDERTHEHOOD]

I said if u don't want to remove the lock then u can mask it and then spary the paint.

[@gurkaran9871]

Is clear coat compulsory?

[@UNDERTHEHOOD]

No

[@AkashRoy-ob4od]

Kitna din tak tike ga spray?

[@UNDERTHEHOOD]

It has been more than a year and paint is still there except the part which has chipped off due to key ring.

[@UNDERTHEHOOD]

Though I am rebuilding the bike right now, so I am going to sand it deliberately in few days

[@cavinrodrigues194]

Buddy that link is of golden spray paint

[@UNDERTHEHOOD]

Yes brother I just checked, I think the link got updated because i posted it 9 months back! I will find an alternative and post there back. But it is better if u buy it offline, u will find it at much much cheaper price.

[@UNDERTHEHOOD]

Actually the company is Gold acrylic spray paint but the color is black, though I have not tried and tested this company.

[@j.p..solanki3868]

Humko malum hai bhai englesh tu bolta hai likin hindi bolna bhai hame englesh fadna nahi ata hai

[@johndegio8686]

nice yar

[@UNDERTHEHOOD]

Thanks a lot brother 🙌🏻 🙌🏻 🙌🏻

[@venugopalgowda7956]

Is this painting is permanent or for several days..

[@UNDERTHEHOOD]

Brother my is still fine except for few scratches

[@venugopalgowda7956]

@@UNDERTHEHOOD tq bro

[@jdvlog39]

Permanent or not?

[@UNDERTHEHOOD]

2 years and running 💥

[@thahirah202]

Bro use mat black not glossy

[@UNDERTHEHOOD]

Already used! And it came out how I expected it to be, u may use whatever u want.. Atb

[@vikasup65wala]

Up 65 mekha se ho

[@manivannan3492]

This paint used plastics?

[@UNDERTHEHOOD]

No it won't, atlest not properly and firmly and if it is a very smooth surface than the spray will just glide like water! I painted a few plastic parts but I took a sand paper and rubbed it once over the part completely so that the paint has something to stick to. Then it will work.

[@anilkumargowda3659]

@@UNDERTHEHOOD i want this

[@suryar9887]

Baba sticker

[@UNDERTHEHOOD]

Sorry?

[@SuryaPrakash-ct5fr]

Bro Apache 1604v painting panalam

[@UNDERTHEHOOD]

?

[@garrykay9904]

This is sooo bad. Filling the gaps with spray paint?? You stay away from my bike please 😂

[@abhaykumar378]

Bhai apne number send karne ma bhi vns sa ho mujhe bhi apne bike modified karne hai bhai plzzz send me number

[@pankajk0714]

You r from vns.

[@UNDERTHEHOOD]

Yes

[@abhinavs1000]

Poor finish lack of perfection. Improper sanding

[@UNDERTHEHOOD]

I have already mentioned it in the video.

[@sarjusekh2290]

Palsar ka logo kaha se aya bhai

[@UNDERTHEHOOD]

Bhai just google pulsar logo, then download the logo and size it accordingly! And simply print it on a Sticker paper.

[@RahulSen-yv9ol]

Kaha per hai ye

[@UNDERTHEHOOD]

?

[@madhur8537]

mahine bhar bhi nhi chalega

[@dhanzdomingo4433]

it is not the proper way in rapainting hahaha...

[@UNDERTHEHOOD]

Ya it is called DIY 🍻

[@onkarsadgar5239]

Hindi bolo

[@krishnadevsah5840]

Om shanti

[@metalvings1169]

Super b bro

[@UNDERTHEHOOD]

Thanks a ton brother 🙌🏻🙌🏻😍😍

[@trickytuitions2158]

Tell me the parts in which we can paint the bike? .

[@UNDERTHEHOOD]

Bro technically all the parts in the bike can be painted including tyres, though not with this aerosol.

[@santuchatterjee8357]

Bhai hindi me bol de.

[@UNDERTHEHOOD]

Bhai isma to bol dia ab ksa change ho ga, new videos hindi me ha.

[@sunaidsainulabeedn6233]

👍