Pridružite se kanalu da dobijete pristup pogodnostima: / @amddetailing #headlight #amd #polish
Пікірлер: 67
@donaldmorrison52892 ай бұрын
Top shelf advice!
@codytaylor43512 жыл бұрын
Now the nicest, cleanest, most expensive part on that entire car 😂
@affendyismail21362 жыл бұрын
Very good explanation bro
@МариянПенчев-х9б2 жыл бұрын
Perfect like every time, now i'm look for Kovax and I start to use this brand. I really want to try. Now I work with 3M 75mm.
@Amddetailing2 жыл бұрын
Very good 75mm
@CHIBA280CRV2 жыл бұрын
Wow that is awesome work 👍👍👍👍👍
@ghanshyaamramkissoon3207 Жыл бұрын
I wouldn't worry too much about the paint of the car. My car have many many scratches. The headlight have many more, but the headlights are important... so some treatment will do it well...
@hugomaferreira Жыл бұрын
This a great video for hand headlight restoring!. Would be acceptable to use a paste wax aswell instead of ceramic? I know ceramic is better, but just to know your opinion. And how many sand papers of each grade you use in the process or per headlight?
@LOREGUINNESS2 жыл бұрын
After some trials I ended doing just the abrasive paste polish by hand and I was satisfied. I could not even get close to the result the guy on the video with his 1500 before polishing. The haziness with my 5000 (the trial I did) was greater than the one in the video with the 1500. What do you people think. Any suggestion or idea is well accepted. Best DIY to all of you.
@Amddetailing2 жыл бұрын
you have to remove all the burnt protection to get a good result, and you can't do that with that granulation, you have to use a rougher method, eg paper 400, etc. There are several videos on my channel about it
@LOREGUINNESS2 жыл бұрын
@@Amddetailing got it, thanks. Next summer I think I'll do that again in the right and long form. Thanks for responding. Best.
@td4speed2 жыл бұрын
Good job anther informative video that,s many people
@Amddetailing2 жыл бұрын
Tnx my friend
@ShasCarDetailing10 ай бұрын
Hi, nice vid. Any reason why you not use a machine for the process? Is that because of scratching for you? Is the ceramic coating the same as a headlight spray, how long does is last and why you prefer that over it? Thanks
@Legolas6911 Жыл бұрын
Nice work. Does hand sanding with dry paper leave sanding marks on the headlight that will be visible after polishing?
@naughtymaster16 Жыл бұрын
If you do it properly by sanding from smaller number and gradually increasing the sand paper size then it'll be fine looking at the end, apparently after polishing by hand/ orbital polisher.
@haremoali2947 Жыл бұрын
Good job dear.please we need video how to restore glass car have scratches please upload it
@Amddetailing Жыл бұрын
kzbin.info/www/bejne/j56minqGepKDotk I have video
@Rashed_73 ай бұрын
Awesome, I have a small budget and i can't afford a new sander , can i use a battery drill ?
@user-romanshvediuc2 жыл бұрын
very very very good work
@Amddetailing2 жыл бұрын
Tnx bro
@alexvargas2063 Жыл бұрын
Excellent video like always. What ceramic coating do you use on the headlights? Thanks
@Amddetailing Жыл бұрын
Tnx Gyeon trim
@sammarithinang_pannarith2 жыл бұрын
Is there any specific type of description, feature, or anything you're looking for when looking for ceramic coating for headlights? Thank you.
@louisprice67363 ай бұрын
Where did you get the foam backing pads from ? They didn’t come in the kit , thanks
@davidhuffines1574 Жыл бұрын
I wish you put links for these products.
@dthor69223 ай бұрын
How do u get rid of scratches after attempting headlights restoration?
@lz50a10 ай бұрын
I worked down from 600 to 800, 1000, 1500, 2000, 3000 by hand & then a machine polish with a compound & refined with a polish. The lights look fine from a distance, but if you check with a inspection lamp there is many many scratches left from the sanding stage. Realy took my time on each grit & polishing tough. I had to put pressure in the 600 stage to get the old clear coat of, could that be the issue? Or do I need a more agressive compound polishing pad? How doe I solve this?
@Amddetailing10 ай бұрын
paper marks remain, you work without pressure and sand in one direction, and each subsequent paper is longer than the previous one
@mihajlom6793 Жыл бұрын
How much cost to do job like that? And where I can buy kovax sand paper
@Amddetailing Жыл бұрын
100 euro
@kc77972 жыл бұрын
Very nice job! How long does it take you to finish both headlights?
@Amddetailing2 жыл бұрын
Tnx friend 3 hours
@josipdujo97222 жыл бұрын
Gospodine Tataragiću lijep pozdrav. Smije li se znat die se ovi Kowax schmirlovi mogu narućiti
@Amddetailing2 жыл бұрын
Za Bosnu kod Adia u Mostaru as_detailing,u Srbiji uskoro kod Marija Nikolica a u HR uskoro i kod Denisa sto Gyeon nabavlja za HR
@reddiamonddetailing1088 Жыл бұрын
The problem I encounter with 3m sandpaper is when I dry sand it's like you use it for ten seconds then because of the residues it doesn't work anymore as aggressive as it did when the sandpaper was new and then you'll need to work very hard to have the abrasiveness of the first seconds of use.. Well sh*t
@keithroberts5611 Жыл бұрын
It could be your pushing to hard? I recommend anyone who is a first time retoreing headlights is to aquire a 3M restoration kit, Reason is 3m takes the guess work out of which grit size to use, Moreover there's only 3 steps of sanding p500 p800 p3000 trizact magic pad, with tap water, 3m instructions are fool proof!!!
@croes1610 ай бұрын
What product did you use to polish headlights?
@faegyrfvvc6 ай бұрын
Did you even watch the video?
@maurodominguezramirez25462 жыл бұрын
I really liked how you did your job, could you tell me where I find the tools you have? and what brand are they?
@Amddetailing2 жыл бұрын
Try kovax oficial page
@idaniko1002 жыл бұрын
The results are delightful. Do you suggest to restore any headlights with dry hand sanding with the the same grits as you did?what is the name of the kovakx kit that you use there?i can see large variation of grits there. I know that when you finish to restore somthing it looks like new but im curious if do you get holograms in the end of the sanding process with out the polishing and the ceramic coat? I restore headlights they look greay but when the lighys are on you can see holograms. Thank you for this awesome video.
@syazmi97 Жыл бұрын
What grit do you recommend with other sandpaper? Like normal one,not kovax
@Amddetailing Жыл бұрын
P120-p2000
@МариянПенчев-х9б2 жыл бұрын
Hi again, I want to ask you which series of Kovax i must use fir for car clear coat and head lights polish?
@cszmotorspreston9758Ай бұрын
Where can i order the sand pappers and pads? Thanks
@AmddetailingАй бұрын
kovax official page
@cszmotorspreston9758Ай бұрын
@@AmddetailingThank you. And is these wet sanding pappers?
@wilfredgomez26322 жыл бұрын
i have bought kovax sandpaper but idk for how long i can use every sheet before throwing it away. do you reuse those that just used?
@Amddetailing2 жыл бұрын
when you see that it is not grinding, replace it
@MichaelBrianInc Жыл бұрын
Why only charge 100 euros? Is there a reason for flat rate charging on this type of job?
@Amddetailing Жыл бұрын
there is a reason why some things don't change
@MichaelBrianInc Жыл бұрын
@@Amddetailing Sorry I’m not understanding your response. Are you saying because this type of job, the processes don’t change and majority of the headlights are roughly the same so that’s why you charge a flat rate? Am I understanding you? I notice here in the states at least, many charge differently. Some charge a flat rate, some quote based on the specs of the vehicle and headlight condition, and others charge a percentage based on how much replacement lights would cost.
@rodolfocepe6362 Жыл бұрын
is that a plastic or glass ? thank you
@Amddetailing Жыл бұрын
Plastic
@MrRiderHD2 жыл бұрын
Po tebi,da li ti se je bolje pokazala Ewo HC pasta ili Zvizzer HC ?
@Amddetailing2 жыл бұрын
Dosta slicne paste
@mrak_restoration Жыл бұрын
Amazing 🧐🧐🧐🧐
@Amddetailing Жыл бұрын
Hvala brate
@BurnoutSyndrome. Жыл бұрын
Why dry sanding? Wet sanding isn't that effective?
@keithroberts5611 Жыл бұрын
Wet sanding double's the time to restore headlights as wet sanding acts like a lubricant and slows down surface removal furthermore it obscures visible damage to the lens,
@VIM977 ай бұрын
Technically, an amazing video, but the narrator is bery patronizing with his somewhat good English !!! 👎 but like I said excellent technical video the man who is doing the work is an absolute artist except for the duct tape around the paint fender
@sappucinoo2 жыл бұрын
hi, you dont like clear coating them again?
@Amddetailing2 жыл бұрын
No
@jeremyackerman76512 жыл бұрын
The Ceramic coating is the new clear as it’s a protection. You can use a sealant after, but preferred methods are coating or a PPF (clear film)
@franchesconieves11205 ай бұрын
There is no factory protection. If the factory protection was there, they wouldn’t need to be restored, You know, like when they were NEW and had the, factory protection. Lol.
@grandmastert01 Жыл бұрын
I’m sorry !!! I thought this was a tutorial how NOT to do a headlight. The second I saw a guy put duck tape on my cars paint I would send him packing