How To Rig and Lift an Off-Center Load

[@miketilly1808]

Just a tip, using sling I would always try too choke them so they are not able to move or slide. I see 1 sling mounted correctly.

[@daliagonzalez1613]

Amazing video! It has it all

[@LiftingandRigging]

Glad you think so! Thanks for watching!

[@usmansulehri6733]

It's very helpful.Make more videos about rigging

[@LiftingandRigging]

Thanks for watching! Check out our Learning Center for all our articles and videos. Lots of rigging articles/videos! www.mazzellacompanies.com/learning-center/

[@semmin7210]

Very good info

[@LiftingandRigging]

Glad it was helpful!

[@syahruljulak8382]

Thank you ,for your information lifting sulution

[@LiftingandRigging]

You're welcome. Thanks for watching!

[@mode1charlie170]

……using caldwell equipment. Great sales video here.

[@personanongrata7976]

very interesting and informative. Thank you

[@LiftingandRigging]

Glad it was helpful!

[@janieramirez7169]

Thank you!

[@kevinwelds]

could i use this video to play to others

[@LiftingandRigging]

Yes of course! That is why we make them, so everyone can learn and hopefully stay a bit safer on the job site. Please feel free to use all of our resources to help others learn. Our learning center has many free downloads, articles, videos, and podcasts as well. www.mazzellacompanies.com/learning-center/

[@Abundance172]

How do you calculate the degree that your off on your lift

[@LiftingandRigging]

The degree you are off is not usually exact. The idea is to make sure your lift is as level as possible so that you are distributing the weight evenly. There is tolerance there, but it is slight. A very slight tilt can be accepted, and you can eyeball that 5 degrees. Anything more than that can be dangerous. You don't need to be out there calculating how many degrees your load is tilting. The idea is to rig it so it is not tilting at all.

[@pelusogarcia584]

Is there any easy way to calculate the center of gravity on an off-center load , prior to try at the field?Thanks !

[@waynewilkinson5261]

There is a section to determine COG. It's an older book, but full of useful information.

[@tumwinerooney.1829]

How much is the certificate of rigging and lifting

[@LiftingandRigging]

If you want a certificate from ITI it really depends on what you are looking to accomplish and what course(s) you want to take. There are different levels of rigging training. For a certificate in Basic Rigging & Inspection, the course length is 1 Day. Open Enrollment Course Fee is $595/us. You can check out the courses here: www.iti.com/rigging-training-courses or you can always contact Mazzella: www.mazzellacompanies.com/liftingu/training-services/

[@sayedrazique547]

how can i get a chance to work with you?

[@LiftingandRigging]

Check our careers page! www.mazzellacompanies.com/company/careers/

[@andremcqueen81]

🎉🎉🎉

[@chrisshaw3368]

Not a single mention of tension differences between sides and how to consider that to make sure you don’t over load a sling(s)… just talked about their own products they have to promote…

[@andremcqueen81]

Just discovered this channel and a fairly new remote crane 🏗️ operator/slinger, got to say great content

[@LiftingandRigging]

Welcome aboard! Thanks for watching!

[@mohammedbinmohammed761]

How to lift off an off centre load with a tow leg sling?

[@LiftingandRigging]

If you are looking to lift a load with lifting slings, your best bet is a chain sling, as this allows you to adjust the length of the legs. You can shorten one leg as needed to get the load level.