How to ROOT and install TWRP custom recovery on lg v50

[@Yur11B]

Thank you for the work done, everything turned out !!!

[@fharidvalencia2068]

after flashing twrp I cannot enter fastboot or twrp recovery mode, any tip?

[@pierro78]

excellent video ! thanks !!!! I un-rooted my bootloader-unlocked phone when I upgraded from android 10 to android 12 ( latest V500N40d_00_LGU (Korean U+)) and your method worked perfectly !! (only needed to change Storage Type from emmc to ufs in QFIL ...) I shared your video on xda in the "Guide LG G8/G8x/v50 Bootloader Unlock and Magisk Root using Firehose" discussion and maybe I am going to share it on the V50 subreddit ;)

[@susqazi8390]

I'm on Android 12 Verizon Please steps in detail

[@Saya_mau_Kawen_3]

bruh. after rooting as above and then installing twrp. Do I need to flash disable vm verify?

[@jhonerick1688]

Hey Btech, I had my V50 rooted before and need to format my data. Now on Magisk I have Ramdisk: yes but the device isn't rooted. To root again I should just replace the patched image again or do something else? Nice video btw!

[@Btech94]

Since you are on the stock rom replacing the patched boot image will do the job

[@jhonerick1688]

@@Btech94 If a install a custom ROM I would need just to flash the Magisk zip wiith the Rom TWRP, DMEncrypt, right?

[@ErickSarita95KingS]

Hey, at the end, and pressed The Vol & power buttons simultaneously for a few seconds, then the device kind of restarted and returned to the TWRP mode and I was able to swipe to unlock and use the keyboard without the OTG dongle.

[@prayogajasmanaputra3877]

mine can not do that, it keep booting up to android

[@susqazi8390]

Please let me know steps in detail Mine is still unrooted V50 Verizon Android 12 OS

[@RicCoranes]

I got a filehose error. QFIL doesn't proceed to partition manager.

[@J.M.Morales-Romero]

Me neither, same issue :(

[@PacoYanYow]

I followed your instructions, after restarting it my sounds and mobile data aren't working anymore .

[@skullcrush3r437]

I did this some time back and lost my audio😪

[@Zai6512]

Sir, what happens if I flash the wrong partition like I flash the boot file to the abl file? will it be a dead boot?

[@Btech94]

Probably device will bootloop. Thats why you need to keep the backups. Long as you have backup files for both abl and boot files you can recover your device easily.

[@UmarAzeem-s3y]

bro plz help me to root lg v50 thinq 5G help me android 12 V500N40d software version can you teach me plz

[@BlueshineIND]

bro u cant fix my problem in LG v50 (current version is not available for user cant find match carrier check nt code ffffff : 63) i cant fix them

[@justindeguro9012]

is it possible if i do this on lg v50s thinq 5g u+ 5g

[@psmuz]

hello! i try you method , but , after method my phone not get root , model lg g8 (VERIZON) , please, help me (i have unlocked bootloader, and drives installed)

[@l3oclaw512]

For Verizon there is a thread on XDA

[@psmuz]

@@l3oclaw512 I know, but I try method on xda, and I not get root again

[@Alan-pg7uz]

I have LG V5O, but now on settings/ about phone say Model Number LM-G850, why :(

[@Btech94]

That's because of the custom abl file. It is from lg g8x. If you need to get the original model number you can reflash the original abl of your device (you need to backup it first like i said in the video). This will bring the original model number back. But you wont be able to get into recovery menu by holding volume down. So if you are in a custom rom add a shortcut to get the advanced boot menu to enter twrp. Otherwise you wont be able to get into twrp if you wont to test out new roms or whatever.

[@Alan-pg7uz]

I fix that ty, @@Btech94 , ypu shoud make a new custom rom, without the problem of resolution

[@EJudeGarcia]

does this method work in a linux os?

[@superiorwarakorn6733]

I follow all of you step in this video also follow in previous video step by step to unlock bootloader, but now my phone lost all audio cant use cellphone. and in twrp cant see mount anything (0 B), please help, how can I recovery my phone. how to use backup file that I keep it save by follow you step. (abl_a abl_B and boot_a & b)

[@Btech94]

You can replace all the abl files and boot files to get the device in to original state. Also if you want you can replace boot_a and boot b files with twrp flashable file and boot via reset menue(little bit hard to boot via this mode). I haven't use the phone in stock ROM after unlocking the bootloader and installing TWRP. None of my custom ROMs gave an audio issue tho. You can try orange fox recovery if twrp giving issues BTW.

[@superiorwarakorn6733]

@@Btech94 can I replace abl and boot by the Qfil on pc without twrp? please let me contact you via email I need help. I will give u a super thank.

[@Btech94]

@@superiorwarakorn6733 yes you can. Enter the EDL mode and replace them via qfil. You can enter edl mode all the time by method I've shown. You dont need stock ROM to enter the edl mode.

[@superiorwarakorn6733]

@@Btech94 then, when replaces it and I need to enter any command in ADB command? or just replace then exit Qfil and exit EDL?

[@Btech94]

@@superiorwarakorn6733 no replacing original files are just enough. No need of adb commands.

[@pierro78]

oops I could not reboot into recovery using the method at the end ... luckily "adb reboot recovery" worked and I am now trying riceDroid ...

[@pierro78]

oops I guess I could have tried the buttons combo : power+volUp, when logo appears you let go of power button and immediately press it again, then proceed to factory reset option which will boot you to TWRP but I was too scared of going into the "factory reset" option ;)

[@rahatmomen2156]

Hello Bro Please Help Please link Magisk patched file

[@NEWAS-td6fb]

Thank you man Ihave lg g8 x Network is block How to unlock it Place see me My brother

[@amrybb677]

do i need to flash Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip on twrp?

[@Btech94]

that will be needed only if you want to root your device.

[@amrybb677]

@@Btech94 i flashed it then i got stuck on logo boot.

[@Btech94]

@@amrybb677 only flash it after Rooting in twrp. If you root the device and don't flash also device will be boot loop.

[@skullcrush3r437]

Should i use magisk v23.0 only?

[@Btech94]

I haven't tested in other versions. But after installing custom rom and if you need to root you can use latest available magisk version

[@skullcrush3r437]

@@Btech94 i want to root not custom rom mainly

[@skullcrush3r437]

I saw you rooted with v23.0

[@Yur11B]

now i need help imei 0

[@420notfound8]

how do i install it without root?

[@skullcrush3r437]

How to contact you

[@naim8809]

how to reinstate

[@johnroyceumbajeno7448]

4:24 why mine is folder empty? help anyone

[@ip4droidchannel549]

Does this work on android 12?

[@Btech94]

First finds out that your device already have a fastboot mode. If it does you don't have to replace abl_a file. If you're device doesn't have fastboot mode you can follow all of these steps and unlock the bootloader.

[@ip4droidchannel549]

@@Btech94 so its okay if i unlock my bootloader while im on Android 12?

[@hallucin0g3n_00]

​@@Btech94hello sir. Im currently using v500N (skt) with android 12 (40D latest firmware). Already bootloader unlocked but i lost my root since upgrading past android 11. My question, can i use your guide to re-root my android 12? Or should i downgrade to android 10 first and follow your guide? Thanks

[@Btech94]

@@hallucin0g3n_00 no need to downgrade. if you have unlocked bootloader you can do this whether android 10,11 or 12

[@hallucin0g3n_00]

​@@Btech94thanks sir❤

[@superiorwarakorn6733]

ขอขอบคุณ

[@UmarAzeem-s3y]

bro plz help me to root lg v50 thinq 5G help me android 12 V500N40d software version can you teach me plz