How to Sandcast signet rings. Punisher ring

[@CaptainFrandy]

Love this! Gonna need to look this up in more detail!

[@SJWCshorts]

Glad you like it! I have a video about this on my main channel that you can watch😉. When I tried finding information about this, I almost couldn’t find anything.

[@mchammer9084]

Hi mate this is a great method is it possible to make a blank inlay ring with this method?

[@SJWCshorts]

I don’t think it’s possible with the edges🤔

[@jamesjohno1180]

Is the dowel you out in the middle of the ring just made from clay? I want to make a print of my current ring but don’t know what to use inside, I’ve been looking to see how to make a print of my signet ring without it being a big thick ring at the top and was super happy when I come across this video so thanks! And thanks for the help! I’m a beginner I just want to make s print of a ring that means a lot to me so I can wear a backup or make it from different materials and practice to make different things etc

[@SJWCshorts]

I made it out of casting sand with the help of 3D printed tubes😉. I know, I was looking for a way to sand cast rings for weeks and months and finally found one video. And that is this methode. Just be sure to make the dowel as tight fitting as possible. It should barely fit the ring.

[@vibes2924]

Hi can i get the full link for this video

[@SJWCshorts]

Sure you can: kzbin.info/www/bejne/lXPanmtrqNJ9rcU

[@Numerouno001]

I asked so many jwellers but they refused they can't make a ring like this in silver ..they are ready to make in gold..how to get this ring cad from computer image to solid structure

[@SJWCshorts]

Do you have access to to a 3D printer? If they can make it in gold, they can make it in silver too 😉.

[@sreerajkp7516]

Which metal did u use bro?

[@SJWCshorts]

Silver 😉

[@jaimem.m.2044]

hello man, do you think that instead of the delft clay, we could use the Das moldable clay (the one the is like play doh) Do you think it would resist the heat?

[@SJWCshorts]

For making rings? I don’t think it would stay in place 🤔. You could try it out😉. But make sure the sand is dry so you don’t have steamblow😉.

[@jaimem.m.2044]

@@SJWCshorts thanks, I will give it a try

[@nadiasefti2380]

Hello, what's the cork in the middle made from and did you make it yourself? I've seen a few people use this technique now but no explanation!

[@SJWCshorts]

Casting Sand😉. Yes, I’ve printed everything myself. So u need a ring, two tubes with the same diameter of the inside of the ring. One closed and one open. The closed one is for making an in print in the sand. And the open one is for the sand of the mold you make, so the mold is closed and should pour a nice ring😉. If you want, I can make a full video on my main channel to explain this a little bit better😅.

[@nadiasefti2380]

@@SJWCshorts yes that would be awesome! I have a few rings I've tried to cast but the rims are not straight so the the centre of the mold keeps moving 🤦🏽‍♀️

[@SJWCASTING]

@@nadiasefti2380 I will make a full video on this channel (this is my main channel) ,the other one is for testing KZbin Shorts content😉.

[@SJWCASTING]

@@nadiasefti2380 I have a short (the same video like this) but with explanation. Maybe that is helpful? Forgot it was with text😅.

[@nadiasefti2380]

@@SJWCASTING OK great I will keep an eye out on this channel if you do happen to make a video!

[@Numerouno001]

Is this silver ring..what would be the total cost of this ring? ..i ordered a same ring but instead of punisher it's lion face..

[@SJWCshorts]

I’m not sure, I bought and melted some silver but I don’t remember what it costed😅.

[@Numerouno001]

Please tell me..I bought lion silver ring like this for 4700..is it worthy or cheap or expensive

[@SJWCshorts]

It depends on how much detail is in it, who made it, how much work they put into it. So I can’t say what’s expensive or cheap.

[@amirchohan1702]

sir how to get this casting flask with round pipe you use sir please tell me im try to get it

[@SJWCshorts]

I found it on Amazon a couple of years ago 😉.

[@amirchohan1702]

@@SJWCshorts sir plz provide me link or proper name so i can try to find it

[@SJWCshorts]

Cast iron 2 piece casting flask 😉

[@amirchohan1702]

@@SJWCshorts I don't get round bar with it on online but thanks you so much for reply me i like more cast video if you post

[@SJWCshorts]

@amirchohan1702 oh 🤔. Maybe it was on Etsy (search casting flask). I’m ok a little break from casting but I’ll resume filming soon.

[@joethebro1238]

Can I ask where you get that moulding equipment from

[@SJWCshorts]

Of course you can! The flask I got from Etsy. The ring and other plastic, I 3D-printed myself.

[@joethebro1238]

​@@SJWCshorts hi, thanks for replying. When you say flask, do you mean that metal thing at the beginning holding the sand

[@SJWCshorts]

Anytime😉. Yes, that iron 2-piece thing is a casting flask😉. You can find many different sizes on Amazon, Etsy, eBay,…

[@joethebro1238]

@@SJWCshorts thanks again

[@joethebro1238]

@@SJWCshorts I have got one more question that I forgot to ask. Is the sand a special type of sand needed for the moulding

[@anilsoni498]

मिट्टी में कौन से मिश्रण रहते हैं

[@SJWCshorts]

It’s just regular petrobond sand. So it contains oil.

[@YeshuaIsTheTruth]

What are those iron things called?

[@SJWCshorts]

Casting flasks

[@YeshuaIsTheTruth]

@@SJWCshorts thank you for the quick reply :)

[@SJWCshorts]

@jordanrichards320 I try to reply as fast as I can 😁

[@OneAndOnlyJordan]

Do you know where I can purchase the tubes/are you selling them?

[@SJWCshorts]

I 3D printed them. Sorry, I don’t sell things 😅.

[@cedricjones6713]

Do u have the file for them and are u willing to sell it

[@SJWCshorts]

@@cedricjones6713 I don’t think I still have the files😅. I’m not selling prints at the moment. Do you have a 3D printer?

[@cedricjones6713]

@@SJWCshorts yes I do but I’m new to it so I’m a lil confused by it

[@SJWCshorts]

@@cedricjones6713 that’s ok. I still use the most simple program to make 3D prints (the better ones I get from thingiverse). So basically I use thinkercad for making prints. Basic stuff like the tubes.. Save them and use ultimaker cura to convert it into a usable print file. And put the sd card in the printer. I learned basic stuff by watching loads of videos, and trying stuff out.. But those 2 programs are good for beginners: Thinkercad for making and ultimaker cura for converting the files.

[@JMNID]

What is that white powder?

[@SJWCshorts]

Talcum powder or better know as baby powder. It helps removing the mold from the sand ( so it doesn’t stick).

[@JMNID]

@@SJWCshorts thank you for your response 🙏🏼

[@SJWCshorts]

Anytime 😉

[@GregLusco]

Borax

[@GregLusco]

@@SJWCshortsyes but borax works better