How to save Money by using the Universal OCA & Magic AMOLED Laminating Molds

What is up guys! In this video, I go over the cost benefits of using the Universal OCA & Magic AMOLED Molds. I also cover step by step instructional guide on how to properly use the Universal OCA & AMOLED Magic Mold. By using the Universal OCA & AMOLED Magic molds you will be able to have a quicker workflow, save space and have a cleaner lamination!
These molds can be used in pretty much all types of laminators whether YMJ, Forward OCAMaster or OLED 2020.
I hope you enjoyed the video if you did please make sure to subscribe, many more videos to come.
If you are located in the USA & would like to purchase these molds or any other refurb equipment in you can do so by clicking the link below. Cheers!
Visit our Refurb Shop
training.mrphonedoctor.com/shop/
**Want to learn how to repair?**
Click Here: training.mrphonedoctor.com/
**Need Parts? Click link below to shop Our Online Store**
training.mrphonedoctor.com/shop/
Remember always mind the flex!
🔔 Subscribe for more repair videos & giveaways: kzbin.info...
✅ Out our other repair videos
Apple - kzbin.info?list...
Samsung - kzbin.info?list...
Questions or need a phone repaired?
CONTACT US BELOW:
Free Repair Estimate?
mrphonedoctor.com/repair-rates/
Fill out this form and we will send you a prepaid label within 24hrs.
mrphonedoctor.com/mail-in/
Contact Us:
mrphonedoctor.com/
[e-mail]
575-639-3406
Follow Us:
/ mrphonedoctor
/ mrphonedoctor
/ mrphonedoctor
Snapchat - @MrPhoneDoctor
TikTok - @MrPhoneDoctor
SAY HI ON SOCIAL:
--Master Surgeon--
Javier V. Guzman Jr.
/ wopito
/ wopito
/ technoking

[@mabus33]

Once again absolute perfect video. Thank you so much for sharing your knowledge with us. Full of important details. The suregon is Back 👍🤗😊 Thanks again and you all stay safe over there.

[@MrPhoneDoctor]

Brother! Thank you so much man hope you are staying safe as well. Cheers

[@duanemassey4560]

Was litterally looking at my moulds earlier, thinking how ridiculous it's going to end up being and that there must be a decent universal mould? Think I'll give this one a try! Good to see you back up and running normal again. 👍

[@MrPhoneDoctor]

Right! Save some cash:)

[@nicholasalexander7445]

Very helpful tip. I wish I watched this video before I made my purchase 😂

[@karolz5016]

can you show how you change polar film on lcd using this mold ?

good

[@gulmulmiah1919]

Would it be possible to use the red thick sponge mold for glass to screen repair instead of the black one.

[@mgomez5606]

Javi, does the OCA that uses the sun light any good?

[@siddharthbhavsar3990]

What are the preferred settings of your lamination machines in iPhone 11 to 12 Promax and Note 9 to note 20 ultra S9 to s20 plus

[@wilsonjavier47]

Hola como vas amigo, una pregunta, cual oca recomiendas para los curvos? Dices que mejor es ponerle oca aparte a los curvos, cual sugieres, gracias.

[@Lumii81]

Bro which Temperature do you use for your bubble remover and how many degree's? Thanks a lot and continued sucsess.

[@gregorygarciagehlen4153]

nice video bro

[@MrPhoneDoctor]

Thanks

[@lietuvislietuvosuk6678]

Nice video thanks Mate, can I use black mold on the forward base ?and which oca you are using ? Did you using same company's oca for all edge models ?

[@MrPhoneDoctor]

Yes you can. We use full oca from same company

[@gianluigi5208]

Where i can buy only the black stickers ? Thank you

[@officeronduty9267]

may i ask a question.I brought my fone for reglass and when the lamination was done there was still some bubbles left on the screen. I saw him fix my fone and he did not separate the oled screen from the case and went on laminating the fone with it. He tried to remove the bubble but was unsuccesful. I watched alot of utube vids and all of them did separate the screen from the case. Should i tell him to do the same when i go back for a back job?

[@joaofernandes30]

It's possible to using in all lamination machine??

[@F91W]

Do you guys think if it would work with Ocamaster k6 pro airbag laminator? I am doing pretty much iphone screens

[@justinneumann1492]

Any reliable suppliers of quality front glass? I'm looking for pixel 4a 5g

[@popsypopescu2093]

Does this mold work on Ocamaster GM958 laminator?

[@OvertheTopp3]

Mind me asking where did you get that lamp that’s on your clean room?

[@MrPhoneDoctor]

Found it on amazon

[@danlabonty9720]

How much do you for s20 ultra glass only? And where are you located i/e what country And state.

[@Manuelschajris]

Hi Javi ... ask friend. Nowadays there is a Brand of OCA Mitsubichi that includes the glass, is it much better to buy the Glass with the goose? or is it better to buy everything separately?

[@MrPhoneDoctor]

Depends I prefer to buy seperate oca for curved glass. Flat glass will get with OCA

[@letsgetto1millwithoutvids]

Ah damm if you were in the UK I would love to do work experience with u guys

[@MrPhoneDoctor]

Man! Just get started bro. Lots of opportunities for glass only. Lmk how i can help

[@letsgetto1millwithoutvids]

@@MrPhoneDoctor well I'd love a part time job I'm trying my best as a freelance graphic and UI designer but it's hard I don't make a stable income at 22 to get my own place and I have knowledge and skills in art photography and electronics repair/ basic electrical engineering knowledge I've repaired I phones in the past before built a 3d printer and a CNC machine and my pc and I ordered the equipment like the heat pad to change my lgv30+ battery as it's not holding its charge Ps. I subbed and I've been watching your videos there really good and clear

[@blackjacket8565]

hi is this universal mold work on both flat screen and curve or edge screen?thanx

[@MrPhoneDoctor]

Yes it will but flat glass only no frames. Like xr or lower than 8 models

[@nelsonmadiba4287]

Bonjour, jamais je n arriverai à centré un écran lcd avec la lentilles sans moule de positionnement car c est vraiment dur et il ne faut pas se rater

[@MacGamingPlace]

So you cant do inframe lamination with this mold? Anyways thanks for the information man!

[@MrPhoneDoctor]

This is for out frame. We are still experimenting with in frame for S20 and above..

[@peoticempire]

hey, what about flex cables that run down the back of the oled instead of the side? is there a space on the otherside of the mold? can it do s21?

[@MrPhoneDoctor]

No problem it does all oleds no issues. It's soft enough no need to have IC cutouts

[@Dariddda]

I just bought the magic mould 2 weeks ago, and it is fantastic... barely visible waves, and much faster operation. The only problem that it can not laminate the S20 ultra... at least for me... it failed 2 times to take out enough air from the 4 corners... so after autoclaveing there where still bubbles in at least 2 corners. so i had to use the ymj mould for the second try on them. for every other display it worked perfectly.

[@branislavxxx7249]

Why do waves apear ? I was refurbishing samsung s8 s8 plus and got many waves. Waves apear when removing glass with wire, soi tryied low temperature 70deg and still got waves.

[@branislavxxx7249]

Try using higher temperature in autoclave so u get rid of bubbles

[@Dariddda]

@@branislavxxx7249 the waves come from the copper sheet behind the display... so any inperfections on the copper sheet appears as a wave on the display. i tried 75 deg in the autoclave and run it for 18 minutes in 7 bars... i did 3 runs and still in 1 corner there was a bigger bubble spot... it is only happening with the S20 ultra... S20+, S20 no problem... only the S20 ultra... driving me nuts!

[@MrPhoneDoctor]

Try the full OCA should leave better results

[@branislavxxx7249]

thanks for reply. so how u remove glass without getting waves ?

[@isaacdiaz1353]

Hey I wanted to know how much screen on galaxy s10 plus glass only

[@MrPhoneDoctor]

139 mail in If you could fill this form out and we will send you label within 48hrs. mrphonedoctor.com/mail-in/ repair takes us 2-3 business days and we invoice you after repair is completed. Please see mail in form for return shipping costs.

[@justinneumann1492]

what does the auto clave do? just a deep vacuum with heat?

[@MrPhoneDoctor]

It's similar pressure cooker. I am going to do an unboxing on comparison video on them soon

[@a.technicalit7745]

This black magic mold one+ 8 pro punching support ya all curve display support

[@rtechnic8398]

Which oca you use to laminate tuch and display

[@MrPhoneDoctor]

Which model?

[@ganeshsmartphoneservice459]

How to buy

[@ninjarepair]

I still have all my Samsung moulds and not used them 😂. I'm going to sell them all and buy this mould

[@MrPhoneDoctor]

Us too!

[@jeffwu315]

Just order the Univeral Laminating Magic Mold at you website, i use this with out the base can I do that?

[@MrPhoneDoctor]

Awesome well ship tomorrow. We use with base mold

[@jeffwu315]

Can u tell me the name for the base mold or you can sell me one pls

[@MrPhoneDoctor]

@@jeffwu315 name is base mold we don't sell . Should come with your machines...

[@rogersarevalo3613]

Does the mold comes with pins?

[@MrPhoneDoctor]

You need to ask for them if need. These designed for the base mold

[@theodoro6]

👍👍

[@ryansomething6577]

Personally I didnt have a toothpick but what I did have was a mechanical pencil so I carefully poked around and cleared the blockage in my port with the lead if anyone tries this as well MAKE SURE TO HAVE MORE LEAD OUT OF THE PENCIL THAN THE LENGTH OF THE HEAD OF YOUR RESPECTED KIND OF CHARGER TIP

[@rodrigoriosjr7377]

Yo how much will it be to fix my samsung galaxy s8+ screen

[@MrPhoneDoctor]

Please refer to our free repair estimate form for pricing. mrphonedoctor.com/repair-rates

[@rodrigoriosjr7377]

@@MrPhoneDoctor so it going to be free

[@MrPhoneDoctor]

@@rodrigoriosjr7377 no look are our price estimate online

[@rodrigoriosjr7377]

It still turn's on put all you see is lines

[@MrPhoneDoctor]

Needs new display

[@rodrigoriosjr7377]

@@MrPhoneDoctor yes it does

[@okoyechukwudi3302]

Which country are you?

[@MrPhoneDoctor]

Usa

[@technicalgolaji6508]

Hi bro

[@cellphoneclinic]

Hi do you have a universal mold 🎃

[@MrPhoneDoctor]

Yes we do training.mrphonedoctor.com/ shop

[@VijayKumar-vi7hh]

Vijaypatel

[@MichaelGroenendijk]

Manual aligning 😒

[@MrPhoneDoctor]

Manual aligning the best! Why shuffle and spend money on molds.

[@gkrepairs]

please move the autoclave away from your face

[@kenbrake2828]

Why?

[@MrPhoneDoctor]

Autoclaves are like mini bombs. There has been a few of them have blown open. Must of been cheap quality autoclaves.

[@kenbrake2828]

I kinda figured it was going to be something like that.

[@midcell5749]

Does this mold work on Ocamaster OM-K15 laminator?

[@edobosho]

Yes, you have to buy some individual springs if you don’t have ymj base. Visit OLEDmobile dot vn