Appreciated those two seconds at 3:48 where your rocket blower was in perfect sync with the beat.
@TheTauntaunCardtrick6 жыл бұрын
Thank you so incredibly much for this! I just got Silverfast a month or so ago and this really helped me understand it better. Also, this might be the best, most thought through tutorial on any topic that I have ever seen. Great job!
@JonathanNotley6 жыл бұрын
You’re welcome! If you like this then check out my slide/black and white ones too - they’re very similar but you might find some of the specifics useful!
@TheTauntaunCardtrick6 жыл бұрын
Also, do you have a place where you publish your photos? I'd love to follow your work.
@JonathanNotley6 жыл бұрын
My Instagram handle is @j_notley
@TheTauntaunCardtrick6 жыл бұрын
Yes, I have seen it just now. I will look into that later on!
@TheTauntaunCardtrick6 жыл бұрын
Thank you! I just followed you. Great stuff there, man!
@irenedp49473 жыл бұрын
Although you probably won’t read this, just wanted to thank you for your excellent video on scanning color. It was my basis today to learn how to scan two 120 rolls of Portra 400. Without your tips my resulta would have been quite disastrous.
@zguy951356 жыл бұрын
I'm impressed with the scanner, your results are SO much sharper at 1:1 than 90% of the examples I've seen online. Thanks for the great tutorial!
@JonathanNotley6 жыл бұрын
Thanks! The trick is to adjust your film tray to the correct height and use fancy lenses ;)
@jef.herrmann3 жыл бұрын
Thanks for sharing, it is a very thorough explantation of all functions. In practice, I do a very minimal adjustment with Silverfast as it takes too long to adkjust every picture one by pone when you have a lot of work and I do all the editing with Lightroom. There are still some options that I use systematically on some series of photos like dust removal because it is very efficient in Silverfast.
@jasonchampney42975 жыл бұрын
Great tutorial Jonathan, very clear, concise and informative 👍🙏
@RobMoses3 жыл бұрын
Great video man, thank you. I just did my first scan with Silverfast and your video was helpful.
@MKultra813 жыл бұрын
Great Video Jonathan. Just a hint with the blower that an assistant once showed me, after blowing, pull the blower away from your film (or sensor, or lens) when releasing the bellows, so you don't suck in the dust you just removed and shoot it back onto your subject.
@JonathanNotley3 жыл бұрын
I like this because I don’t have to try it to know that it would work - thanks for the tip
@MKultra813 жыл бұрын
@@JonathanNotley No biggie. It's so obvious in hindsight but it never occured to me until that guy told me. But it's not uncommon to learn a lot of stuff from assistants. They often work in rental houses for years and know every bit of equipment by heart.
@fotowissen Жыл бұрын
Excellent Video, thank you!
@stephan.scharf6 жыл бұрын
optional tip: a Milty Zerostat 3 antistatic pistol (or another tool like this) could help to avoid new dust on film strip surface after blowing
@JakeeYb0y19 күн бұрын
amazing, needed this. thank you
@zrinkomaloseja26154 жыл бұрын
Hi. What troubles me actually is - what IS the Portra look? What is the point of shooting film if everything is tweakable afterwards? If you would have scanned at Fuji 400H would you have searched for the same skin tone rendition? Would that be then a Portra look or a Fuji look? It puzzles me. I just got in to film photography cause I somehow wanted to escape the hours in lightroom postprocessing for my digital files. This is a part that really puzzles me so in the end I tend to just leave it to my lab to scan it - to actually "get the look".
@rogmic3 жыл бұрын
A "Pledge" brand , fluffy duster is an efficient way of removing dust from films.
@RayEspifilm3 жыл бұрын
Thank you for this video!! I learned allot!
@JonathanNotley3 жыл бұрын
Glad it was helpful!
@billferris48834 жыл бұрын
Excellent walk-through. Thank you.
@canphoto2 жыл бұрын
Phenomenal video! Thank you so much!!!!
@HamiltonWard3 жыл бұрын
This is wonderful, thank you so much for this video.
@RewDowns4 жыл бұрын
Have you used the Negative Lab Pro software?...I wonder how it compares to SilverFast Thinking about getting the v800 or v850 which one would you recommend?
@Surge10453 жыл бұрын
Excellent excellent excellent job! Exactly what I needed to get started on this tool. Thank you!
@nicooolaas4 жыл бұрын
Thank You !! i'm going to the B/W video now :)
@idleworm3 жыл бұрын
Wonderful tutorial.
@joeltunnah3 жыл бұрын
Why does iSRD (infrared dust removal) seem to work for everyone but me? I run it, and when I zoom in at 100% in Lightroom I see jagged geometric artifacts everywhere it “fixed” a dust spot.
@gufszczur5 жыл бұрын
Great, quick tutorial, thanks for that! I like your workflow, and learnt a lot. Question: what is the film holder you are using? I have just a regular plastic frame kind.
@JonathanNotley5 жыл бұрын
gufszczur they came with my Epson V850
@VinceNysse5 жыл бұрын
Great tutorial! Is there any chance you could do a tutorial on scanning 35mm slides with the Epson? Or explain the process in comments whilst using Silver Fast? Thanks👍
@eoghanhennessy153 жыл бұрын
Loads of my negafix profiles are missing, I'm also using an Epson v850 pro with the silverfast 8.8 software, any help would be awesome! thank you
@cristiandt99645 жыл бұрын
Hey man, thanks for the great tutorial! One question though : what is the best way to post the scans on social media? would you recommend using jpeg instead of tiff? Or saving as tiff and then exporting using lightroom/ps? Thanks in advance :)
@JonathanNotley5 жыл бұрын
I scan everything as Tiff for archival/printing purposes. If I want to post something I export it from PS as a 2k long side jpg
@cristiandt99645 жыл бұрын
Thanks a lot! Gonna try it out in the next few days
@xesse15 жыл бұрын
Hi, thanks for the video! I want to scan my images at 2400 ppi, but when I move the slider it only snaps between 1600 and 3200, how do I move it freely? I am using the demo version if that makes a difference
@JonathanNotley5 жыл бұрын
Different scanners & software will have different options. You best bet is probably to scan at 3200 and then resample it in photoshop!
@asherdog92483 жыл бұрын
Unfortunately Silverfast now requires an internet connection for their version 9 of HDR and AI Studio. This is a real no go for those who scan film out of our rigs in Pational Parks or BLM land in the middle of nowhere. Version 8 does not require an internet connection. I've stuck with V8 for now.
@DavidWilliams7037A5 жыл бұрын
I use SF 8 Studio with a Plustek 8200i. Something that frustrates me is, that when I adjust the frame of the image, the colour balance changes. When repositioning the frame to its previous position the colour remains at its 'adjusted' state.
@JonathanNotley5 жыл бұрын
There’s a menu option called ‘frame inset’ that lets you tell the software to ignore the area closest to the border - also you can turn of auto-adjustment for Cc etc
@DavidWilliams7037A5 жыл бұрын
@@JonathanNotley Thanks for that. I knew about that option, but I was thinking the wrong way round. I had set it to 0. Now setting it to 100 has solved all my colour problems! Now if only I could figure out how to export B&W 16bit/8bit scans in sRGB or even Adobe RGB rather than Epson grey. CaptureOne doesn't recognise the Epson colour space. :). Thanks again for your help.
@geoffhoward21714 жыл бұрын
Great mini tutorial Jon'. I do however have a comment and a question; comment, I think it would have been more beneficial if you'd used a 35mm neg as I suspect the majority of viewers would be working with that format. The question refers to 35mm, as I am using a V800 Epson, what size print could I expect to produce from such a scan? Geoff
@AlysVintageCameraAlley4 жыл бұрын
Hey great video. What height do you set your negative holder to? Also I have silverfast 8.8 but under color depth it doesn’t give me the option for 48bit. Do I have something turned off? Thank you
@jasonschjerven3 жыл бұрын
How do you get the standard Porta 400 in Negafix? I only get every other version of the Portra iso 400..
@scdronemedia3 жыл бұрын
Excellent. Thank you.
@nicopampin33784 жыл бұрын
Hey mate, wich model of Kaiser Slimlite Negatoscope are you using? And what inch?
@eleventhree72494 жыл бұрын
Hi, Jonathan, thanks for your wonderful tutorials. I've seen them all. My question is: when I scan my films and slides, I often get a very annoying blue shadow around some objects. I've tried to remove it to no avail. Is it a matter of bad storage of the films (they are all more than twenty years old), or is it a matter of bad scanning? I use Silverfast 8.8 and a Reflecta 7200 scanner. Thanks!
@WarsawMeloman3 жыл бұрын
How do you have 160? I have only 160 nc and vc
@LiliaCarlone4 жыл бұрын
Hey there, thank you for this video. I have a question, when i make some correction on one frame, it automatically copy them on others, and also, when i zoom out from the detailed image it removes all the correction i made. Can you help me?
@chrisstaniforth5629 Жыл бұрын
Great stuff this. I was wondering if you could give any advice to when negafix hasnt got the film stock im shooting? I use fomapan and rollie rather alot and use silverfast 8.8 for scanning. Cheers 😊
@JonathanNotley Жыл бұрын
The best advice is just use whichever profile you like the look of, even if they have the profile
@chrisstaniforth5629 Жыл бұрын
@@JonathanNotley thanks for this dude!!
@arcp_4 жыл бұрын
Very useful, thanks.
@SnapographyAP4 жыл бұрын
I'm enjoying your medium format videos....very helpful. Why was your image size only slightly bigger than FF 6×4k if it's MF?
@devroombagchus74603 жыл бұрын
I expected to learn how to start. The only thing I picked up was how to insert the film in the holder and get rid of dust. Then you rambled on about advanced settings. Wonderful, but for video 2, 3, 4, etc. I stopped watching, so I don’t know how to get the image on my hard disk.
@slhibbs5 жыл бұрын
Hi great videos thanks, Im just into scanning my own negatives with the V600. Could you tell me what light board your using, or could you do a short video on it thanks again Stephen
@JonathanNotley5 жыл бұрын
Hi Stephen, the light table is an Icoco A4 but I only bought it because it’s cheap and it’s currently held together by electrical tape!
@iambeetle5 жыл бұрын
That’s such a great tutorial!!! Is it possible to do a tutorial for Epson Scan? Thanks a lot!
@JohnMargetts155 жыл бұрын
epson scan is a horribly designed software, download the trial of silverfast
@dannylibicki4214 жыл бұрын
Thank you for this tutorial! I just got a Plustek scanner and it's been a really help getting started. I was wondering, do you have any tips for using multiple exposure? Each time I've turned it on to see how it performs the image comes out all wrong, very magenta color, stange looking. Not sure when exactly I should be using this feature and if there's anything more to its settings than simply turning it on.
@megzjr4 жыл бұрын
I would say make sure you clip your photos so well that none of the orange edges around your photo are there, crop it so that only your frame is being worked on.
@frankfurts.11965 жыл бұрын
Loved that video. Got one question though. What's the difference of sizing the image down in PS after all. I mean why didn't you choose a smaller size in SF in the beginning? Would appreciate an answer! :)
@JonathanNotley5 жыл бұрын
Ah. This is a slightly confusing one but essentially it’s about getting the maximum ‘real’ dpi out of the hardware. When set to 3600dpi the 8200i is only able to max around 2400 dpi of detail but at 7200dpi it’s producing around ~3200. This is a common thing scanner makes do and only a few (eg Dimage, Pakon etc) accurately label their abilities. Since the 7200dpi scan only contains 3200dpi worth of real detail the rest is just bloat-pixels so the resizing knocks your files down to a more reasonable size. I use Bicubic (sharper) which helps with detail as well. Essentially you want to cast the widest net and then throw out the junk afterwards instead of aiming for your print size straight away. I do still use lower settings for web use/previews though!
@gabrouxc4 жыл бұрын
Hi Jonathan, thank you for this great video ! Will Silverfast work with an Epson V600 under Mac OS Mojave ? I've read there could be incompatibility issues... would I be better off choosing Vuescan ? Thanks !
@JonathanNotley4 жыл бұрын
I use Silverfast on 10.13 and haven’t updated for fear of killing it - I think perhaps Vuescan is better for the time being
@milesmonroe656 жыл бұрын
Thanks for the video, nicely done as ever. I was inspired by a previous video to get the plustek 8200i ai for my 35mm film. I notice you’ve updated your advice regarding resolution, sharpening and dust removal. I wasn’t sure if this was because you were dealing with medium format or perhaps something to do with the flatbed scanner? Anyway, could you let me know what resolution you advise for best quality from the plustek and also if you have any insight as to whether they may be updating Negafix any time soon? Quite a few current film stocks are missing and that’s left me floundering a little... fujic200, kodakcolorplus, kodakultramax, Fuji industrial, Cinestill...??
@JonathanNotley6 жыл бұрын
The plustek achieves best results when you scan at 7200dpi and downsample in Photoshop - the Epson achieves its optical limit between 2400-3600 but the output resolution after photoshop really depends on its use. Bear in mind the negative size makes a big difference. RE: Negafix I’m not sure what their schedule for SF 9 is but I’d recommend using similar stocks which have profiles for now
@milesmonroe656 жыл бұрын
Jonathan Notley Thanks Jonathan. Your videos have been really useful when it comes to scanning film. It’s surprising how poor the information on KZbin is around this, considering it’s growing popularity. Look forward to future film photography insights from you.🙌
@shopafelic4 жыл бұрын
Great intro to scanning film in general and manipulating Silverfast. Thanks. If you still check this - do you see any need to use the maximum resolution of the scanner for archival of old film? I've so far opted to scan at 3600ppi at 48bit tif files (because the latter 2 don't affect scan time, which is so far a significant concern) with the Plustek 8200i, while only scanning at 7200ppi to obtain the maximum optical resolution of the Plustek for selected images which were previously printed at 8R or above. Seems to be a balance of time and quality.
@JonathanNotley4 жыл бұрын
I definitely wouldn’t scan everything at max res for archival purposes, life’s too short.
@MB-or8js5 жыл бұрын
Another good video - which frame selection option in SilverFast 8.8 do you actually use when scanning a negative/positive with any kind of glass holder? I am using also anti-Newton glass holders (I got mine in 4x5" size from an enlarger setup which fixes the negative between two glass plates), and I found that for example the 6x6 frame holder option still gives me slightly sharper scans than just the 6x6 frame option. This is likely due to the glass plate thickness which lifts up the negative a bit from the scan plane.
@JonathanNotley5 жыл бұрын
Frame selection as in scan area or do you mean holder/straight on glass? The scan area doesn’t affect sharpness. The height is set depending on wether I’m taping film to ANR glass in a holder or scanning it on the glass using the ANR to keep it flat!
@MB-or8js5 жыл бұрын
Referring to the choice in SilverFast 8.8 to select a frame from the drop-down menu either by using the film holder or directly scanning on the scanner glass. I understood so far that this changes an algorithm in SilverFast for best achievable scan sharpness of the frame.
@nurikrauthammer24453 жыл бұрын
Thanks for the vid, very well made. i've got a question though. Everything works out well until it is finally downloaded...When I try to open the file it just shows me some black and white stuff with "Silverfast 8.8" written over it. Any idea how to prevent that so I can look at my scans?
@gustavomenezes45 жыл бұрын
Hi Jonathan, how do you straighten your film?
@mondosaims96214 жыл бұрын
hello, when I go into the unsharp masking, it doesnt really sharpen as well as your image did when you applied the usm. Any idea what that happened?
@notanotherutubeuser2 жыл бұрын
how do u save an image once u scan it ???
@JonathanNotley2 жыл бұрын
The act of scanning an image involves saving it, just check where the file is deposited in the top left of the Silverfast UI. I think the default is ‘pictures’ on mac
@ofirberman8403 жыл бұрын
Hello! thanks for the video! How do I scan three 6X7 images together? It's impossible to put the negative inside the holder
@Ryan-lu9km3 жыл бұрын
You can't scan more than two frames with a single holder, as it only loads two 6×7 frames at once. If you want to scan more you'll need another holder. If you have an Epsom V600 it's really only two frames at once, but if you have the V750/V850, the holder comes with two trays, allowing for two frames of 6×7 each, so four frames at once.
@ofirberman8403 жыл бұрын
@@Ryan-lu9km Most of my negatives are cut into three frames :( I just got the V850, It comes with two trays but I can use only one per scanning. I have another question, maybe you can help.. I use the silverfast 8.8 SE PLUS and the prescan is blurry, very uncomfortable to use. Do you know if this can be changed? Thank you so much!
@Ryan-lu9km3 жыл бұрын
You can also place the strip of film directly on the glass surface with no holder, that way you can scan may frames at once. The downside is that you may get Newton rings (optical distortion caused by the contact of glass with the film). You can use Anti-Newton ring glass, but it may not be necessary if you don't see this effect happening. If your preview scans are blurry, in Silverfast 8.8 SE you can increase the preview resolution (I'd suggest 1200 to 2400 dpi). If your scans are too blurry, you can ajust the height of the V850 holder using the slider on the edge. By increasing or decreasing the distance (+ or - symbols), you can get sharper images.
@ofirberman8403 жыл бұрын
@@Ryan-lu9km Thank you for your help, I will try it! The final scan are nice and sharp, I was talking about the photo that I see on the prescan!
@Ryan-lu9km3 жыл бұрын
@@ofirberman840 I'm glad I helped you, also I was wondering why this happened, because with such a large negative even 600 dpi would do a good preview. No wonder the final scans should be really sharp, considering the size of 6×7. Maybe one day I'll get a MF camera, for now just 35mm.
@ahmet-balci5 жыл бұрын
can i print dsl pictures with a b/w laser printer on a transparent folio as a negative, afterward i will make the oldschool print and bath process to make pictures on real photografical paper
@JonathanNotley5 жыл бұрын
Laser - no. But you can make negatives from digital files for darkroom printing. I'd rather shoot film to be honest.
@kimcrowe16485 жыл бұрын
Can you scan old box brownie (117) negatives and old 127 negatives from this scanner and program?
@cristobalbatlle5 жыл бұрын
If you have the carrier yeah, you can do it easily. If not, you can do it anyway on a wet mount (check YT tutorial). Also you can get a flat glass carrier from the site "betterscanning".
@oopsydaisy746 жыл бұрын
Cool video, not familiar with silverfast, so very helpful. What lightbox is that?
@JonathanNotley6 жыл бұрын
idk I just typed lightbox into amazon and went with it
@delicatebelle4 жыл бұрын
hey! Thank you so much for this video. I have used the iSRD-mode in the past and it was quite effective. Indeed saves so much time with correcting and removing everything in photoshop. Haven't scanned in a while and for some reason I cannot make the iSRD-mode work anymore now. I am currently scanning black and white film, but instead of removing small particles and dust from the scan, the iSRD just messes up the whole photo and I end up with some abstract blurry picture, instead of the actual photo. What am I doing wrong?
@JonathanNotley4 жыл бұрын
ISRD doesn’t work with black and white because infrared can’t get pass through the silver in the negatives. It’s slide and colour negative only I’m afraid. I also have a video on black and white film that might help
@MarkusPaulPhoto6 жыл бұрын
Why did you set the orange mask tolerance to 50? Any specific reason? Default as far as I remember is 16...
@JonathanNotley6 жыл бұрын
No reason but to be honest with you it never seems to have much effect. I’d say default is fine.
@jameslane38466 жыл бұрын
Hi, been using Silverfast but my images seem to be so noisy and grainy??? Even Portra 160. I have shot at box speed or overexposed by a stop and there is still lots of noise, I'm wondering what is wrong? It's more noisy than my DSLR at ISO 3200. Looking at other people's work, their's are much cleaner and sharper
@JonathanNotley6 жыл бұрын
What resolution are you scanning at? Are you using USM/ME?
@jameslane38466 жыл бұрын
@@JonathanNotley 1600 dpi and sometimes using USM and/or ME but it doesn't seem to make a difference to the crazy amount of noise. Maybe my scanner is just crap? It is an Epson v550
@JonathanNotley6 жыл бұрын
Are the films pushed and do the negatives look underexposed? Try using the 1:1 mode and clicking through a few options. I find that if you’re dealing with an issue it’s best to turn everything off and build up from a base
@jameslane38466 жыл бұрын
@@JonathanNotley I found that changing the dpi to 3200 made the noise slightly less visible but still high. I switched off all tabs and they aren't underexposed nor pushed.. :( it's so frustrating as I want to avoid paying a lot for a pro scan in a lab
@JonathanNotley6 жыл бұрын
Maybe adjust your scan height? Sharpening out-of-focus images could introduce artefacts
@ffbrownie6 жыл бұрын
nice video, trying to gauge what options you opt for the Ai version rather than the SE plus. Is there anything from this tutorial that would be lacking in SE plus (on their website it just mentions expert mode but doesn't actually explain what that means) thank you
@JonathanNotley6 жыл бұрын
You’ll be fine with SE, expert mode isn’t super useful and 24-bit colour is fine unless you really need to go hard in post
@ffbrownie6 жыл бұрын
Jonathan Notley thank you for the response!! Enjoy your work
@BarwickGreen4 жыл бұрын
Great video but the music in the background is very distracting. Noisy neighbours?
@davordanach23625 жыл бұрын
How do I identify the film material for a correct Negafix value?
@davordanach23625 жыл бұрын
Atleast I found the (new) site www.imageaircraft.portfairy.town/DXsim/#Sim%20top but I do not understand how to input anything into this simulator.
@jonathanclarke57634 жыл бұрын
There is something i dont understand though, even though im shooting 100iso film i cant figure out for the life of me why its so grainy. 35mm film format
@JonathanNotley4 жыл бұрын
Could be over-sharpening, development, under-exposure or bad film stock.
@jonathanclarke57634 жыл бұрын
@@JonathanNotley I will have to take some to shoot an exposure test roll to find out more. Its bugging me so much and i need to know why. Thanks for the point in the right direction
@UNOCASTILLO3 жыл бұрын
good tutorial, but as far as i can see this has some cons in this technic. how do you know what are the true colors, tone, and contrast of the film stock? back in the analog days, you took your film to the lab and they just printed in film paper so you get what the film was meant to give. if your exposure was wrong you got a dark/ or to bright image. so you has to learn to exposure pretty well. i don want to "fix" exposure" on post. i don want to "fix" colors. i just want to see the colors and contrast that the fil was made for. in this process, settings here, and setiings there, how do i know what it is the real thing. you chosse a film stock based on how it response to light and to se tones and contrast that it has. with to many sattings i will end up in a laberinth. i don´t want to work on film the way i work on digital. that has no sense. what i want it is to shoot on analog, develop my film and scan it to se the results of a especific emultion. what if i have an old emultion that i want to experiment with?, negafix doesn´t have any preset for it. my problem here it is that i has been searching for a good workflow but i can´t find anything. the closer thing it is a plugin for Lightroom which cost $99 USD plus the cost of LR. so i am a little lost.
@JonathanNotley3 жыл бұрын
Lab technicians have always had to adjust and balance colour. The notion that there is a ‘true’ colour or tone to a film stock isn’t possible.
@xesse15 жыл бұрын
Also, i have just realised i have the demo for silverfast ai studio 8.8 which is $300. The silverfast se 8.8 is only $50, is the difference in terms of scanning ability and colour results worth a $250 difference? thank you.
@JonathanNotley5 жыл бұрын
Stick with S.E, Ai gives you some extra options but unless you’re using HDR studio I’m not sure it’s worth it
@mynameiscal6 жыл бұрын
Assuming you're in the UK, how hot must your house have been these last few weeks?! Also good video.
@JonathanNotley6 жыл бұрын
Oh my god my air-conditioning broke the other week and I’m classifying it as a near death experience
@jack91g2 жыл бұрын
64bit RAW DNG is the best for negative and slide
@JvkobGideon4 жыл бұрын
Dude what happened at 5:57? I still can't figure out how to remove the blueish hue from my scans! Thanks for the good video
@JonathanNotley4 жыл бұрын
That was the moment ‘auto ccr’ detected the orange mask and balanced it. How are you scanning?
@geoffbartlettphotography94343 жыл бұрын
Thanks for this walkthrough. Silverfast has rescued my Epson V500 Photo scanner since Epson no longer support it in their own scanning software. One question: other than IR dust removal, what do you see as the advantage of applying settings in Silverfast instead of scanning to raw and using Lightroom or Photoshop?
@samidarnaud73895 жыл бұрын
In one word : thanks
@raymondvickers16446 жыл бұрын
Great video. Could you expand on how you move from the iSRD stage with the HQ screen back to the full image screen for color management. I find this a haphazard process. Sometimes I go back to the full image screen and other times back to the icon stage. Also, you mention that when you go back to the full screen stage for color adjustment the iSRD clean up does not show but will be there in the final scan. Again, could you explain that a bit. I have been going back to the iSRD stage and redoing it just before my final scan to be sure the clean up will be there. It will save me a lot of time is this is not necessary.
@JonathanNotley6 жыл бұрын
There's a way of doing it. I think you click the HQ button again whilst in 1:1 mode but I often forget. Once I've checked that iSRD is working I'm happy to lose the preview because I know the output won't be dusty. If it doesn't work I remove the negative and clean it a bit before trying again.
@clarification0073 жыл бұрын
Nice and shapr video. Well done. Except the bach ground music for the same electronic cheap music for 27 minutes, is terrible!
@myronachtman43045 жыл бұрын
In my opinion, the small adjustments you applied (after selecting the proper film type) made the image much WORSE.
@stephan.scharf6 жыл бұрын
off sound is perfect ;-)
@greatpix Жыл бұрын
Instead of gloves try finger cots.
@dirtywater53365 жыл бұрын
I loathe Silverfast software. It's just not intuitive