💎 How To SCAN 𝐍𝐢𝐠𝐂𝐨𝐦𝐒𝐚𝐭 𝟏𝐑 𝟒𝟐.𝟓°𝐄𝐚𝐬𝐭 / 𝐓𝐮𝐫𝐤𝐒𝐀𝐓 𝟒𝟐𝐄 On Qsat Decoder | Pbteck

How To SCAN 𝐍𝐢𝐠𝐂𝐨𝐦𝐒𝐚𝐭 𝟏𝐑 𝟒𝟐.𝟓°𝐄𝐚𝐬𝐭 / 𝐓𝐮𝐫𝐤𝐒𝐀𝐓 𝟒𝟐𝐄 On Qsat Decoder
To scan NigComSat 1R at 42.5° East and Türksat at 42° East on a Qsat decoder, follow these steps:
Step-by-Step Guide
1. *Connect Your Qsat Decoder:*
Ensure your Qsat decoder is properly connected to your TV and satellite dish.
2. *Power On:*
Turn on your TV and the Qsat decoder.
3. *Access Satellite Menu:*
Using the Qsat remote control, press the "Menu" button.
Navigate to the "Installation" or "Setup" menu (this may vary slightly depending on your Qsat model).
4. *Select or Add Satellites:*
Go to the "Satellite List" or "Satellite Setup" option.
If NigComSat 1R (42.5° East) and Türksat (42° East) are listed, select them. If not, you will need to add them manually:
*NigComSat 1R*
Orbital Position: 42.5° East
LNB Frequency: 5150 MHz (C-band) or 9750/10600 MHz (Ku-band)
*Türksat*
Orbital Position: 42° East
LNB Frequency: 9750/10600 MHz (Universal LNB)
5. *Configure LNB Settings:*
Ensure that the LNB settings match the specifications of your satellite dish's LNB. For C-band, the LNB frequency is typically 5150 MHz. For Ku-band, it is 9750/10600 MHz (Universal LNB).
6. *Add Transponder Frequencies:*
Navigate to the "Transponder List" or "TP List" under the satellite settings.
Add the transponder frequencies. Here are some example transponder settings:
NigComSat 1R Transponders:
*C-Band:*
Frequency: 3652 MHz, Symbol Rate: 30000, Polarization: Horizontal
Frequency: 3656 MHz, Symbol Rate: 10830, Polarization: Horizontal
*Ku-Band:*
Frequency: 12518 MHz, Symbol Rate: 29500, Polarization: Horizontal
Frequency: 12520 MHz, Symbol Rate: 30000, Polarization: Vertical
Türksat Transponders:
*Ku-Band:*
Frequency: 11804 MHz, Symbol Rate: 24444, Polarization: Vertical
Frequency: 11747 MHz, Symbol Rate: 27500, Polarization: Horizontal
Frequency: 12641 MHz, Symbol Rate: 30000, Polarization: Horizontal
7. *Perform Blind Scan:*
After configuring the transponders, go to the "Blind Scan" or "Auto Scan" option in the installation menu.
Select NigComSat 1R and Türksat and start the scan. This will allow the decoder to automatically search for all available channels on the selected satellites.
8. *Wait for Scan to Complete:*
The scanning process might take several minutes. The decoder will find and store all available TV and radio channels.
9. *Save Channels:*
Once the scan is complete, save the channels. You should see a list of available channels from NigComSat 1R and Türksat.
10. *Exit Menu:*
Exit the menu and start watching the channels.
Additional Tips
*Signal Quality:* Ensure your satellite dish is correctly aligned with NigComSat 1R and Türksat and there are no obstructions blocking the signal.
*Software Update:* Make sure your Qsat decoder firmware is up to date. Updates can improve satellite scanning and channel reception.
*Manual Scan:* If the automatic scan does not find all channels, perform a manual scan by entering specific transponder frequencies and symbol rates.
By following these steps, you should be able to successfully scan and receive channels from NigComSat 1R and Türksat on your Qsat decoder.
__________________________________
LINKS
WEBSITE:
www.pbteck.com
INSTAGRAM;
/ pbtecknology
FACEBOOK;
/ pbtecknology
TWITTER
/ pbtecknology
TELEGRAM:
t.me/pbtecknology
#pbteckinfo #lnb #gotvinstallation #multitv #dishtv #directtv #dstv #satellitetv #dish #satellitedish #satellitereceiver #pbteck #pbtecknology #canalsat #canal+ #freefire