How to Seal the Inkjet Water Slide Decal Paper Tutorial

[@martinsalexander9834]

You're really a nice tutor. You simplified everything and didn't hold back any detail. I was particularly impressed when you shared your earlier experiences. Well, I simply came to check if you before the printout with a spray before sticking to a surface or after doing that. Thanks.

[@tonie1106]

I appreciate your comment and as I present any video I try to include every step so that anyone can accomplish that same process. Thanks for watching and I’m glad you were able to gather something that benefits you.

[@otter56]

Thank you very much. I have been searching for videos on how to use waterslide decals that didn't just gloss over the part about prepping your decal paper and sliding it on.

[@tonie1106]

You are so welcome!

[@tbwpurple]

I really enjoyed this tutorial, you took your time to explain what you were doing and i appreciate that. I'm going to go buy a cheap oven that i can use this for this purpose.

[@tonie1106]

Glad it was helpful!

[@dawnhalligan]

Thank You So much for sharing. I had the Same the Problem with Modge podge I was so Mad Too I had to sell it to customers like that. I'm gonna try this.

[@tonie1106]

You are so welcome!

[@micheleharbula1380]

Thank you for the video. I have been looking for a video with this paper for a while now. I have followed the directions to a T. I couldn't get the decal to stick to my cup without it wrinkling up or ripping. I was using mod podge to seal it. I am going to try the other spray you used. Thank you so much.

[@tonie1106]

Wonderful! I glad you like it hopefully I can assist with other video's so don't forget to continue watching.

[@maryduke2402]

Hello enjoyed the tutorial.. Coffee filters can be used to smooth/remove air bubbles and water from underneath by gently dabbing/smoothing from one side of the decal to the other, I hope this helps...

[@tonie1106]

Great tip! I actually used them to put my Vinyl on the ornaments that I just completed and upload.

[@yourunclesam6780]

Excellent Information.Thanks for the tip

[@tonie1106]

Glad it was helpful! I hope you continue to watch my other video's.

[@carolross1449]

You made it look so easy.

[@tonie1106]

Thank you for watching and it was really that easy too. I will be during some other's soon and adding bling to them.

[@EmpressNatiLocs]

You did a great job! I bought water slide paper from Amazon a few weeks ago but hadn’t used it yet. This tutorial was right on time, thank you! I’m wondering if I can use my tumbler press to heat it since I don’t have an oven solely for crafting. 🤔

[@tonie1106]

Hello @Nati personally I whorls not advise you to use the tumbler press for this method given it’s a sticker

[@lindao7887]

Thank you so much Tonie! There are so many different procedures on KZbin for waterslides, in your opinion, do you think the gloss or the matte finish works best? Most of mine is going on resin, but it'll be light/clear/translucent or white backgrounds. Also, I shouldn't spray in my little apt. nor outside, my neighbors get pissed at the odor even tho it's gone in a few min. Are there any indoor alternatives (non aerosol) that you know of to seal/coat?

[@giftsbynique]

Awesome Video

[@tonie1106]

Thank you for watching it’s appreciated.

[@ydee2010]

Thx for this great video!!!

[@tonie1106]

Glad you liked it!

[@nancyruiz5164]

Thank you for sharing.

[@Goldchucker1]

Question? If you used glossy photo paper, why use a matte spray?

[@tonie1106]

The spray is to seal the ink and I preferred matte spray but that was my preference. Thanks for watching.

[@carolross1449]

I love it

[@yvonnetucker1416]

I NEEDED THIS

[@tonie1106]

Glad I could assist , I have a upcoming video coming soon with water slide

[@nurseaprn97]

What temperature did you put the oven on and for how long did you leave it in for ?

[@tonie1106]

It was on I believe 395 but the instruction gives 212-392 and it really depend on your over and I left it in there for about 15minutes. Thanks for watching

[@nataliall5141]

Can i use this for temporary tattos on the skin?

[@tonie1106]

I never tried that but in order for the water slide the melt you must apply heat and I would not suggest it.

[@dawnhalligan]

What Oven did You use by the Way?

[@tonie1106]

I used a inexpensive small black & decker over.

[@MaryTorres-zy8jw]

Do you use the same oven you cook in?

[@tonie1106]

Yes and no, I did use an inexpensive conventional oven that I brought specifically to sublimate in because once you use it you cannot cook in it anymore because of the gases that are released doing sublimation.

[@MaryTorres-zy8jw]

Can I use my mug press? Is it toxic to use in my oven?

[@tonie1106]

@@MaryTorres-zy8jw I would not use a mug press because it will melt and most definitely not your oven but you can use a hair dryer for water slide I used

[@MaryTorres-zy8jw]

@@tonie1106 thank you so much!

[@tonie1106]

Hey @MaryTorres-zy8jw don't forget to subscribe to my channel to see more video's to come. Thank you

[@mauderenedove5411]

what size are you sizing your pictures before printing

[@tonie1106]

I size the picture by measuring the area of the cup I want the picture to cover. So, basically it depends on the cup measurements

[@jennymoore2083]

Thank you ma'am 💖

[@tonie1106]

Thank you for watching

[@brendabrown9023]

Thanks!!!!👍🏽 for sharing your Aweeesome!!!!!🌟 🌟🌟🌟🌟+ Video Tutorial 🌟🌟🌟🌟🌟🌟🌟 because I was wondering how people did this waterslide thing and then sealed them like wow!! 😲 onto there cups and did you have to buy a special oven to bake your cups in? I’m so Amazed!! That I’m sitting here looking at your Video Tutorial with a bag of Popcorn 🍿 🤣 That’s how interesting it is

[@tonie1106]

My apology for the delay in responding but as mentioned these two cups I added the water slide decal on were from the dollartree and walmart. The oven I brought was a regular conventional over from big lot.