How to Service John Deere Z920M | Change Oil, Air Filter, Fuel Filter, Spark Plugs

Step by Step Learn how to service the John Deere Z920M Ztrak Zero Turn Mower. Change oil, air filter, fuel filter and spark plugs.
► Buy John Deere Parts - go.west-equip....
► Need help finding John Deere parts? We would love to help! Call [phone]
Other Z920M Videos:
► Z920M Review - • John Deere Z920 Zero T...
► Change Z920M Blades & Install Jack Kit - • How to Change John Dee...
► How to Level Z920M Deck - • How to Level John Deer...
► Z920M Mow an Acre - • How fast can the John ...
#JohnDeere #Deere #ZeroTurnMower

[@brockleavins9508]

Man, you are an A+ at creating these videos. Thanks for making this easier for me.

[@WesternEquipment]

Thank you for watching and I am glad I could help!

[@thomasseyffert1095]

You are not supposed to screw down the dipstick to read the oil level. The cap of the dipstick should only rest on the threads to get the reading otherwise you will get an incorrect oil level reading.

[@ericwhite2474]

Do you have a video on cleaning a carburetor on the z920m?

[@WesternEquipment]

Unfortunately I do not, but this would be a good idea. I will add it to the list and thanks for watching!

[@nicksevers8045]

Hey! You! Where is the Mow An Acre? Can you also do a review on how to maintenance the Z997?

[@WesternEquipment]

Haha just stay tuned!! Do you have a Z997?

[@nicksevers8045]

@@WesternEquipment No, never planned on having one. I plan on having the Z970 instead. I just really wanna see something diesel related involving maintenance, mow an acre, etc mainly the 997. I know you did the 994, but that was only a walkaround.

[@tiipsyx5556]

How do you remove the oil drain valve completely? Mine is leaking where the valve screws into the motor. Due to the 90 degree where the hose clamps on, I can’t unscrew it because it hits the frame.

[@nickduggan503]

It specifically states on the dip stick to NOT screw cap on threads to check engine oil level.

[@nickduggan503]

This will probably be low on oil and when it fills oil filter after starting it will be even lower.

[@WesternEquipment]

Good catch. I realized this a while back and I will be making sure it is done correctly from now on.

[@daves2960]

The oil filter would actually seal better without the oil finger wipe but it is done to make getting the filter off easier in the future.

[@charlesjosiahfilms5158]

How often are you required to change oil and all this service, after how many hours?

[@WesternEquipment]

Oil should be every 50 hours or annually. The other service points vary but as a rule of thumb it is usually good to do these all when you change your oil just to make sure you are covering your bases. Thanks for watching!

[@JohnathonStokes]

Would be nice to have part numbers

[@Justiceair]

Thanks for the video, Do you use anti seize on the plugs? Any thoughts on doing the same video for the Gator 4x2 tx.. I ordered the home kit from you thanks...

[@WesternEquipment]

Glad it helped you out. I do not use anti-seize but I don't think it would hurt of you did. I am hoping this winter to get some gator service videos done so stay tuned.

[@RocketFallout]

What size hose is that?

[@harryerhart5978]

Hey buddy is that a jd oil filter wrench and if you use a aluminum tray under the oil filter you won't have a mess take care my friend l use a weber grill pan😊

[@WesternEquipment]

Yes it is and that is a great idea! I'll throw that out there in one of my new videos. Thanks for watching!

[@mikeperkins3548]

How do you remove the drain valve? Mine is leaking out of there and need to replace it with the o ring?

[@WesternEquipment]

You can either just screw out the inner valve or you can screw off the whole valve assembly.

[@mikeperkins3548]

@@WesternEquipment the valve assembly hits the frame because it has the T. Didn’t know if there was a trick other then unbolting the motor

[@brandoncordill4649]

Great Video!! Would love to see a transmission service video on this mower! I have this exact mower!

[@WesternEquipment]

I will see what I can do. Thanks for the comment and thanks for watching!

[@JeffHoltInspire]

You showed everything else other than what I needed to know. Where is the drain plug?

[@alexroski8454]

Make sure people to warm up your engine to drain the oil faster.

[@WesternEquipment]

Good tip!

[@thepartsrunner5758]

What is average Labor cost (John Deere) to do this service. Thank you.

[@WesternEquipment]

You would have to call your local dealer for this question. Labor rates vary depending on the dealer. Thanks for watching!

[@Rammer_Jammer]

$100 an hour plus parts at my dealer

[@charliemoore7014]

The new oil doesn't show on the video. It might show up better if you hold closer to the camera

[@WesternEquipment]

Yes, bad camera work on my part.

[@charliemoore7014]

@@WesternEquipmentotherwise good video anyway you could do a redo

[@TheBunxx]

Thank you!

[@WesternEquipment]

👍

[@andabracken4867]

Hydro system drain and filter replacement once a year

[@kleinhardt1]

Very helpful video! Thanks!!

[@WesternEquipment]

Glad it was helpful!

[@roberto33rjh79]

Thanks you.

[@WesternEquipment]

Thank you for watching!

[@Rspruill38]

Excellent tutorial.

[@WesternEquipment]

Thank you and thanks for watching!

[@mandrews631]

Helped me out thank you

[@WesternEquipment]

I am glad I could help and thanks for watching!

[@jackiechen868]

What type oil and oil filter sir?

[@WesternEquipment]

John Deere 10W-30 Turf Gard is what oil I use and the filter is a John Deere AM125424. Here is the link to this mower if you would like to purchase these parts, parts.west-equip.com/zero-turn-mowers/z900-series-commercial/z920m/. Thanks for watching and commenting!

[@allenjessee8860]

Thanks so much for this video. I just changed my oil, filter, air filters, and fuel filters!! Your video is the best out there!! So grateful. I now have 350 hours on my 970r and I love this mower. Do you think I need to change the spark plugs and hydro transmission fluid?