How to set DE telescopic rails for double strokes

DE series telescopic rails are made up of two rails, joined to form a double-T profile, and two sliders, one fixed and the other mobile. The square section makes them compact and allows high load capacity and reduced deflection.
The standard version of these telescopic rails allow a 100% extraction of the length in a closed position in a single direction. However, with one simple operation, it is possible to remove the stroke block and allow the product to extend in both directions.
In this video tutorial, our Technical Director Andrea Tosi will explain how to do it: all you need is a flat screwdriver.
🔎 Find out more about DE on our website: bit.ly/2xEpLgo
#rollon #linearmotion #mechanicalengineering #telescopicguides #doublestroke #manufacturing #tutorial
= = = = = = = = = = = = = = = = = =
Get the best out of your linear motion systems!
🔴 Subscribe to our KZbin channel: bit.ly/2GE5dtU
🔵 Follow us on LinkedIn: bit.ly/2JX0vdB
= = = = = = = = = = = = = = = = = =

[@sunfar0972]

I use this telescope slide, why the ball cage always go wrong position, it’s not on middle position , cause the slide can’t go full extension.

[@theterrible7460]

do you have any dsitributor in Mexico?