How to set G54 Zero on an LNC MW2200 CNC Controller

[@STYLECNCService]

You operate the machine very professionally. I will direct other clients to watch your videos and learn from you.😀

[@DavidLee-gf8pt]

Thank you so much for these Videos, they are very helpful. I just received a similar machine. I have received little to no support from my vendor. through your videos I have been able to at least get the machine running but I cannot use it as I do not have the Post Processor. What post processor do you use and can you share that with me?

[@davidglover2610]

Hi, I was wondering if you may know how to get the dust shoe to change timings? Ours lifts up at the end of machining a little early leaving the cutter exposed? Any tips?

[@Miki25215]

What is the practical meaning of -4 and +4 sign?

[@STYLECNCService]

That's the 4th axis of the machine. If your machine has 4-axis functionality, that button will be enabled.

[@Miki25215]

Tnx dear!! There's some problem we face when we set the x, y, and z axes to zero. We must move 8 mm in the -y direction and set here y zero, then when we start the cycle, it moves 8 mm in the +y direction and starts the task as it is supposed to do. Why does it move 8mm +y in the direction all the time when we start the cycle?

[@STYLECNCService]

Please check that in F3STUP, the BASE parameters and XYZ numbers need to be set to 0.000@@Miki25215