Рет қаралды 6,342
Step1: set up the clock on your unit.
If time ia displayed and blinking, it means that you can set up the time right away, use the min button to setup the minutes, the hour button to aetup the hours and finally the week button to set up the day, and finally push set/clr button to submit it.
If time ia atill blinking use a pin or a pen to push the reset button so that the time stops blinking.
You can verify the time by clicking min and hour buttons.
You can verify the day by clicking the week button.
Step2: Programming the unit to turn off and on based on the day of the week and hours of the day
You can’t move to this step unless the time icon stops blinking on the screen, if you click program it won’t have any etfect while time is still blinking on the screen. Use a pin to reset the controller to get rid of the time word on your screen.
Press program and you will see program set blinking on the screen, this means that you can start programming your unit.
You can toggle between programming mode and view mode by clicking program button, you are on the view mode, when program set is not blinking, it allows you to navigate throughout the days of the week to see your program by pressing the week button.
When program set is blinking, you can start programming your unit, you can choose the week, by pressing the week and then use the set/clr button to turn on or off the unit at a certain hour. You have 24 hours, even numbers are represented by a dot and odd number are explicitly displayed.
You can also choose a day by pressing week when program set is blinking, and then click holiday, this will draw a little frame around the day and it means that the day is off and the ac will be off, this will not delete permanently your program of the day, and you can have it back by selecting the same day and press the holiday button while program set is blinking, the frame around the day will disappear.
One you are done with your programming, press the program set button, the program set word on the screen will stop blinking and your unit will be ready to execute the program.
If you don’t want to use the program, say you want to keep your unit down all the time, just press cancel, program set will disappear from screen and turn off your ac and it won’t tuen on again unless you do that manually.
Click back program to have the program set displayed on the screen and your unit will follow your program.
Hope it helps.
Part No: 6711A90043D
LG old control panel
Schedule, timer, program, holiday
Air conditioner
A/C
AC