How to Set up the Fisher F19 LTD Metal Detector

[@AmericanDetection]

Great video Greg! your settings are almost exactly what I run at. The only difference is that I set my V-Break a little bit lower in that 37 range as some smaller good targets drop down into that high iron range 37ish-40.

[@scdigger]

Russ Balbirona I'll give that a shot! Thanks!

[@tj_maxxxxx]

Thanks for the info!!

[@livewithnick]

The manual says to turn the gain knob to the 12 o'clock position and the threshold knob to where you hear a slight hum before ground balancing. Is there a difference to the way you did it? I noticed your gain know was around the 4 o'clock pos and the thresh was humming much louder. I just got an F19 yesterday. Thanks for the vid.

[@khajanekeraaz]

Brother, if iron is standing in the ground and it is showing non-ferrous readings, then without digging how can you understand that there is iron here?

[@eddiesmith282]

What do set the settings at for coin/jewelry hunting?

[@KernowekTim]

Max Sens (as long as the machine isn't 'chattering') Iron Volume 11-18, V Break 38. Leave notch settings alone until you are competent with the machine.

[@detlev30005]

Nice video wishes from Germany 👍🏾👌