How to set up your Rockville RX230 2 Way Stereo / 3 Way Mono Crossover with XLR Input and Output

Find us on
Facebook.com/RockvilleAudio
RockvilleAudio.com
Rockville: www.rockvillea...
Amazon: www.amazon.com...
ebay: www.ebay.com/i...
Features:
Rockville RX230 2-way Stereo / 3-way Mono rack mountable crossover
Ability to mix 2 channels output
24dB/Octave filters
Mute switches
Channel Gain Control: 0 to +12 dB
Low Frequency Level Control: -8 to +6 dB
High Frequency Level Control: -8 to +6 dB
Low Frequency to High Frequency crossover: 100Hz to 1 Khz x10 range: Changes •
Low Frequency to Mid Frequency from (100 Hz to 1 kHz) to (1kHz to 10 kHz)
Switchable 2-way stereo or 3-way mono operation
Subwoofer out
Subwoofer X-Over Freq ( 30Hz - 200Hz ) adjustable
Subwoofer Gain -6 to +6 dB
Specifications:
Each output is -3 dB at the selected crossover frequency value. Outputs are essentially flat within their relative passbands.
Distortion: Less than 0.02% THD @ +4 dBu,@ 1 kHz
Hum and Noise: Crossover controls set @ 1 kHz, all level controls set at 0 dB; 22 Hz to 22 kHz, unweighted gain @ 0dB(ref +4dBu) - 90dB
Low Frequency Output: -86 dBu below 80 dB
High Frequency Output: -84 dBu below -78 dB
Maximum Input Level: +14 dBu, (channel gain @ 0 dB input level controls set at 0 dB) +22 dBu
Maximum Output Level: +22 dBu, unbalanced +28 dBu, balanced
Input Impedance: 10k ohms unbalanced
Dimensions: 19 x 4.85 x 1.8 inches
Gross weight: 4.18 Lbs
Connectors:
Inputs: XLR Balanced
Outputs: XLR Balanced
Power Requirements: 120V AC, 50/60 Hz, 20 watts
110-120V voltage