Hi I just replaced mine with a differential you'll love it balances out the power front the rear launches out of the hole like crazy and no more wheelies.
@daltonmarshall24067 ай бұрын
You mean a center spool?
@andrewfrost48027 ай бұрын
Yes But if you ask your local hobby shop, they will call it a center differential it is the best mod you can do for your RC truck. You will absolutely love it.
@daltonmarshall24067 ай бұрын
@@andrewfrost4802 where did you get it? I can't find any differentials other then a center locking spool
@andrewfrost48027 ай бұрын
I would try the center locking spool. The one you're talking about if you can't find the differential. I bought mine from Hobby Town. In plano texas Super cool guys that work there, too. They are really nice people.
@andrewfrost48027 ай бұрын
I forgot to ask you what kind of RC car you have?
@biggnasty989 Жыл бұрын
Subscribed! Why? Because you are real AF homie!!!! You are the only one out of the youtube rc wrenchers who give USEFUL information. I'm doing this work on my living room floor homie, and your tips got me back up and running. Thanks bro!
@edwardwester59682 жыл бұрын
Great video thanks 😊 👍
@IRONCLADRC2 жыл бұрын
Yes sir buddy
@robertrodrigues7776 Жыл бұрын
I bought a slipper clutch maintenance kit and it it stripped right away. As of I bought the complete slipper clutch kit
@IRONCLADRC Жыл бұрын
I had the same issue. Waist of money
@damonpeters66453 жыл бұрын
can you drill out the stripped hub and tap it a size bigger and use a bigger screw?
@IRONCLADRC3 жыл бұрын
Iive thought about that, never done it.... not saying it cant be done
@RichardS-o8b Жыл бұрын
I have a granite 4x4 mega and put in a blx100 system in it the slipper clutch just slips i got two runs out of it what do I do to fix it?
@IRONCLADRC Жыл бұрын
There's a slipper clutch rebuild kit available, it has the special screw bushings & new spring. Use red loc-tite on the slipper screw when rebuilding the slipper. Or you could buy a new slipper assembly prebuilt
@RichardS-o8b Жыл бұрын
@@IRONCLADRC I bought the whole slipper clutch setup the second most expensive one that amainhobby's had cost me 45.00$ can't you just super glue the slipper clutch to eliminate it that's what I did to my Traxxas slash
@TheTylerjoy04 Жыл бұрын
I Have The Vendetta & My Buddy Has The Infraction, We Both Running 4s, We Race On A Parking Lot, So If Tighteen My Slipper Clutch Just A Little Bit, I Will Have A Better Take Off, On The Corners Or Turns, Right??
@IRONCLADRC Жыл бұрын
Yes sir that's correct, don't over tighten or you'll run into problems
@TheTylerjoy04 Жыл бұрын
@@IRONCLADRC Ok Thanks Man!! I Appreciate..!👍😊👍 I Just Hope My Buddy Dosen't See This Question Or Comment...Lol!😆
@brionmiller5042 жыл бұрын
Hey, where did you get the plastic nut with the metal nut inside, I purchased the arrma slipper maintenance kit and hobbytown said that they only make a plastic nut. So I was wondering where you got it...
@IRONCLADRC2 жыл бұрын
I think it was in the old rebuild kits.
@brionmiller5042 жыл бұрын
@@IRONCLADRC is there a place that sells new old stock?
@IRONCLADRC2 жыл бұрын
Not sure brother 😕
@DevilesEye1088 Жыл бұрын
SET YOUR CAMERA TO AUTO FOCUS....
@IRONCLADRC Жыл бұрын
Thanks, I've since started using auto focus
@RichardS-o8b Жыл бұрын
If anyone knows how please help me out any suggestions thank you
@jonathansaucedo31992 жыл бұрын
That looks bigger then a 3640 for some reason 🤔
@IRONCLADRC2 жыл бұрын
Nope it's a 3640
@34west702 жыл бұрын
Bekloppt
@norcalrc3 жыл бұрын
Good knowledge bro. Thanks for sharing. One quick note, if you don’t want to reduce the size of ‘specialty nut’ and input shaft, you can order Arrma’s new short input shaft that compensates for the new slipper hardware. Love your videos bro
@jonnyp38232 жыл бұрын
Do you have the part number for the short input shaft? Thanks
@robertrodrigues77762 жыл бұрын
Well that specialty nut isn't like your it's just a hard plastic without the thread and I lost it. Finally got it working then it breaks again
@barrettalen Жыл бұрын
What is the part number for this shortened input shaft
@donniemarks94 Жыл бұрын
I reused the stock clutch pads on a hot racing steel spur for my vorteks 3s and it slip’s really bad, I think I need too use different pads and use 4 pretty sure I only installed 3 pads
@riffraff9070 Жыл бұрын
Finally a video that shows how much the slipper clutch should slip. Thank you. Only video that shows how it should slip.
@krunoslavbenko690Ай бұрын
Anyone watching in 2024 ? Nooo thanks, v2.5 is muuuuccchhh better, normal diff finally...🎉
@surfside752 ай бұрын
Subbed😂 Wish i had watched first. Bought 2 HR pads instead of 3.🤦♂️ is it ok to mix composite and aluminum pads?
@tyrellcorp21189 ай бұрын
Very detailed and the result of lots of experience. That’s how I set my tightness as well. Sanding the spring is a new idea. Maybe just lye or easy off oven spray could make it easier.
@fiercetatsu6782 Жыл бұрын
My Home Depot Has the same set screw it’s a M2.5x25mm cap head screw but any screw with the same diameter and and a length of at least 20mm works the same I’ve had better luck with a Phillips head that’s 20mm than the ones arrma provides
@IRONCLADRC Жыл бұрын
Thanks for the information
@2morrowMuggins3 жыл бұрын
You are on the right track...but to make your life easier...u can purchase a shorter input gear (ARA311031) and as far as the little lock nut...if it's plastic with metal threads you'll still need loctite and it may come loose on you...the newer maintenance kit comes with a little locknut but it's all plastic ( ARA311033) and it will never come loose on you. The only time you would need to cut the input gear a little shorter is if you are using the hotracing input gear because it doesnt come in a shorter form. Ref: kzbin.info/www/bejne/gXy7Z4CtjbSlqsU
@IRONCLADRC3 жыл бұрын
Great information my friend thank you
@2morrowMuggins3 жыл бұрын
@@IRONCLADRC Dude You Rock!
@secret5.3 жыл бұрын
Well that explains why I couldn't get my clutch to work right after upgrading to the metal gear, I only had 3 pads from the plastic gear. Thanks.
@2morrowMuggins3 жыл бұрын
@@secret5. If you buy HR parts...DO NOT USE THE METAL SLIPPER PADS. stick with the stock ones
@IRONCLADRC3 жыл бұрын
Personally, I would have to disagree... I love my HR cluch pads. I kinda swear by them. I've had no issues with mine I run them in the typhoon, & k4. May I ask why you don't like them? Just currious.. thanks for the awsome input
@MJ-gq9nv2 жыл бұрын
Black moly moly 1/2:3n1 slicker than snot I use ing it for ring pinyon grunt and rear the modified safety nut is the shit ,great content bro 💯 likes in the future for quality I'm in 👌
@lawrencegerhard95218 ай бұрын
Been doing this for years now. With locknut grind down to fit flat an lasts longer than that brass shit plastic .nut
@RittenhouseLifestyle710 ай бұрын
I am new to all this, I purchased an aluminum motor mount, center block support. The piece that slides out with strap. Then it came with a slipper spool all steel. But the spur they gave me is 57T, the vendetta has a 50T. So I want to swap the 50T on the all new steel slipper spool. So this should help a lot. I don’t know shit about “shimming” or nothing. I may break it.
@rckidmike35613 жыл бұрын
Great energy hah, fun to watch!
@IRONCLADRC3 жыл бұрын
Thank you, glad you enjoyed video
@user-rq3ce2vk9i11 ай бұрын
I cut it and half with a razor and I didn’t have to trim the end where the motor goes cause it fit all the way in now just got to change my clutch slipper pads and it’s good as new
@43rocket Жыл бұрын
ive been running my big rock for a while im hearing screetching louder sound from slipper area? what needs replacing?
@daniel-is6zf Жыл бұрын
Are the V2 4s outcasts slipper pads like PCB boards.. im sure it had metal on them the last time I checked it😂
@IRONCLADRC Жыл бұрын
Not sure brother
@daniel-is6zf Жыл бұрын
@@IRONCLADRC no worries I was actually doing that when I commented.. threw it back together and it's doing as good as when it left the box... Not gonna push my luck but it'll give me a chance to drive with my mate atleast once 😂👌
@daniel-is6zf Жыл бұрын
Cheers 👍
@1outlawtrucker Жыл бұрын
I have 2-3s an 3 =6s an don't have a clue what u mean.....everyone else been rc'ing since the 80's an 8 have no problems whatsoever maybe ya'all are to tough on your shit 3:42
@doogidunrite4290 Жыл бұрын
I've done this with my senton I've upgraded to a 3s system and all it does is spin the slipper. I glued the plates to the hubs and now it just burns up pinion gears. I had no problems out of the plastic spur and stock slipper set up. I put in the metal 57t and nothing but problems.
@dazzadirt8710 Жыл бұрын
How important is the spring part?maybe thats why iv anialated 5 clutch sets💀😭
@IRONCLADRC Жыл бұрын
Gotta run the spring, I learned the hard way too
@dazzadirt8710 Жыл бұрын
@@IRONCLADRCpreciate u bro...I knew suin wasn't right ..
@dazzadirt8710 Жыл бұрын
@@IRONCLADRCprobably best explanation on the tube too bro..if I never came across ur vid..I'd be still scratching my head😭🤦♂️
@jeremycravens69733 жыл бұрын
Dude just get the shorter input gear and slipper maintenance kit. Damm man I thought everyone knew they make a short input gear
@IRONCLADRC3 жыл бұрын
I like to use what I have instead of waiting a week (ups). Wanted to show people how to do it without spending an extra 10bucks. Every penny helps in this expensive hobby
@skeetskeetonu69283 жыл бұрын
do you have a # Would appreciate it
@anthonyelci73492 жыл бұрын
I dint even run a spring on my screw I just tighten it with locktite and and back off a quarter turn
@mpeezy358 Жыл бұрын
Great vid bro, I appreciate the help. I especially liked the, "that's what she said" comment. Subscribed.
@LightsAndBikes3 жыл бұрын
Is it still holding up? Thinking about doing this myself tomorrow.
@IRONCLADRC3 жыл бұрын
Yes it is. Its still tight. 6 packs later. I am noticing alot of dust in the motor mount housing, and there is a little more play in the cluch i think (I know) its the pads now. So I just got some hotracing aluminum pads, were gonna install. I've been running an aluminum pad in the 3s typhoon mega set up with no play or wear. So to answer the question yes its holding up to my hard driving and i recommend setting the screw a little tighter than I recommend in video, if set to loose I noticed the pads wear down faster.. thank you & good luck my friend
@2morrowMuggins3 жыл бұрын
@@IRONCLADRCI was thinking about that. Very good point. Tightening it a lil more so there is less slip and less grind. I've sanded down the grooves in the metal pads.
@IRONCLADRC3 жыл бұрын
Yes I recommend it.
@robertrodrigues77762 жыл бұрын
Now I got a metal spur, but now it's grinding again I'm thinking it's the front differential since it grind when doing wheelie
@barrettalen Жыл бұрын
Awesome thanks for the great info 👍 😀 what gears should I use to make my 3s Typhon with some Hoons get to scooting?
@tonycoffee7335 Жыл бұрын
I tightened my slipper all the way and the only thing that happened was I think I melted it lol it got really hot and all it does is slip
@RUZTY13113 жыл бұрын
This is only really for the v1 and v2 i believe? The V3 has a much better mount and slipper kit
@robertoelias2583 жыл бұрын
I realize I'm kinda randomly asking but does anybody know a good place to watch new series online?
@reydavian37233 жыл бұрын
@Roberto Elias flixportal
@robertoelias2583 жыл бұрын
@Rey Davian thank you, I went there and it seems to work :) I appreciate it!!
@reydavian37233 жыл бұрын
@Roberto Elias glad I could help =)
@DelightedCuttz Жыл бұрын
Definitely need one like this for speed runs and dirt track racing with the guys ..#ccrc
@TheGAMEGod_YT3 жыл бұрын
Damn Arrma makes this stuff to break on purpose.
@squid644203 жыл бұрын
Good video thanks ☺️
@MrKillerhaze2 жыл бұрын
I gave up on mine and just tighten the shit out of it now I have no problem besides popping out cvd or breaking them because the car pulls to hard but I hate taking that thing apart every single time I run it lol now been months not a single problem besides breaking cvd because not knowing about the set screw lol
@kez850 Жыл бұрын
Yeah I back mine out half a turn instead of the 1 full turn, or 1.5, whichever it is. Haven’t had a slipper clutch issue since
@nateg97702 жыл бұрын
I like the spool modification, definitely only for speed runs
@davidmackgutierrezjr21262 жыл бұрын
Genius idea. I tried it and it really works in all your videos got good content in them it was a quick good fix I like it
@skeetskeetonu69283 жыл бұрын
ok I am new to the Kraton 4 S So today started making a Noies When I Take the Car off the Ground No Noies Soon as I put on ground Click Noies Any Help Thanks
@IRONCLADRC3 жыл бұрын
Sounds like a diff problem? Possibly a planet/sun gear in the diff.... check bearings also
@bigcaliber33882 жыл бұрын
Ironclad.. what size flat head screws are those on that spool gear if you don't mind me asking??
@IRONCLADRC2 жыл бұрын
Oh man I wanna say 2mm or 2.5 I drilled and taped the hole out in the center to accept the larger screw. The 3 on the outside of the home made spool are 2mm counter sank the screw heads and grinded the top flush to clear the inside of the mount
@bubblesrcshed3 жыл бұрын
Kind of simple but I’m shocked they don’t send the right sized part for the stock slipper hub seems weird I would have to cut that nut and shaft but hey you say it works. My issues with the Granite is the motor seized on me once and on my second Granite after bad landings now something is wining like really load not sure what it is as I’m a noob. I have a video if you wish too check it out and comment on a suggestion for repair. All the power is their but it’s loud I think the crappy bearings in the motor can are done. Thanks man cheers 🍻
@seanhamilton41753 жыл бұрын
That's because it's a V2 input shaft. The V3 one is shorter so no need to file anything
@bubblesrcshed3 жыл бұрын
@@seanhamilton4175 with some handy work done too the spur gear it’s working good again on my Granite. Needed to be re meshed after some spur got chewed up
@rccarsandmusic26419 ай бұрын
Detailed excellent!
@truboy5552 жыл бұрын
Yea hard work pays off baby..
@hotracinghelpdesk72432 жыл бұрын
Great content. This is a good wisdom sharing vid. Thank you.
@IRONCLADRC2 жыл бұрын
Yes sir thanks for watching
@TheGAMEGod_YT3 жыл бұрын
Good knowledge for sure
@kennethcraft65633 жыл бұрын
Cool deal
@monosurge3 жыл бұрын
'Learn this 1 simple trick.. in 25 minutes.'
@stevemdelacruz56023 жыл бұрын
You use 4 pads all together
@IRONCLADRC3 жыл бұрын
3 hot racing pads and 1 stock pad, 1 stock pad goes on the front side that takes only 2 pads.. stock on bottom and hotracing on top steel spur gear 4s clutch assembly
@RUZTY13113 жыл бұрын
@@IRONCLADRC I removed my metal slipper pads and used plastic on my metal spur. They were almost impossible to work with to get my slipper clutch at the perfect tightness. It was always either too tight, or too loose. When it was too loose the truck was slow and no power. Tightened it just a little and i would snap driveshafts. Throw them metal pads away haha
@IRONCLADRC3 жыл бұрын
I like mine just got another set
@stevemdelacruz56023 жыл бұрын
@@IRONCLADRC yea
@stevemdelacruz56023 жыл бұрын
3 hr 1 plastic. Wrk good now
@kellysooth6022 жыл бұрын
Stop yelling at me bru
@IRONCLADRC2 жыл бұрын
You started it
@stevemdelacruz56023 жыл бұрын
Makes sense 3s ...4s pad count
@IRONCLADRC3 жыл бұрын
I think the 3s clutch assembly will only take 3 pads so run 3 total hotracing pads
@stevemdelacruz56023 жыл бұрын
@@IRONCLADRC yes got the alum pads
@clayton84653 жыл бұрын
Too much yelling.
@IRONCLADRC3 жыл бұрын
Thank you for being honest..
@unfukngbelvable565darkstar33 жыл бұрын
Don't need to cut nothing just need to get a newer input shaft that is shorter they have it!
@IRONCLADRC3 жыл бұрын
Nice. Thanks for your input very helpful. Thanks for watching.