How To Setup and Use a Charmhigh CHMT48VB Pick and Place Machine

[@lessard2020]

Thanks for your videos, I bought the 36VA and require these, cheers to you!

[@shanekent249]

Great! Let me know if there are any other useful videos that you would like to see.

[@John-ro2yk]

Hi Shane, there are a couple things I would suggest doing different. First, it is generally not necessary have a component in the tape, you can, as you stated later in the video, center on the pocket in the tape, not the component. Second, pulling the tape to feed it (when you were trying to expose a component) will likely shift the location of the feed holes with respect to the drag pin that drops down. Getting the drag pin aligned with the sprocket holes on the tape is pretty fussy/tedious. That is subject to a whole other video.

[@damny0utoobe]

Thanks for this pick and place tutorial

[@pwn20wnd56]

How about making steps directly on the machine?

[@leisryan]

Hi Shane how's everything going with this Pick and Place? I see some youtubers having difficulty and precision with this machine

[@shanekent249]

Hi Ryan - I’m in the lucky bunch of people who purchased this machine and haven’t experienced any quality related issues with it. I know a lot of people have problems, but I really have yet to experience those myself.

[@leisryan]

@@shanekent249 Thanks for responding , I am thinking of getting this model as well, but a bit apprehensive thanks for the great videos review

[@diyarkhamzin9780]

Hi, Mr.Kent, is this model is currently the one of the best to buy? I am thinking about getting this one

[@diyarkhamzin9780]

I am choosing between TVM802a/b, CHMT48VA, CHMT36VA ? Which one should I choose

[@rajkovicsrdjan1641]

Mr. Kent , thanks for the video. Do you have any experience with fiducial PCB calibration on same machine. I tried once but without good result. Simply 48VB didnt place correctly any component. I tried to go back to PCB Commponent calibration didnt work as well. Factory reset made me back to Commponent calibration.

[@rajeshmishra5698]

Sir what is this mining machine ,exceptional coad -63.

[@JohnnyFive626]

Do you have a video of the step before this?

[@harvinderjeetsingh9711]

Is there any latest clip regarding set up please let me know

[@StephanieFung]

Can you use cut tape with this or need a reel?

[@shanekent249]

Yes, you can use cut tape. You don’t need to use a reel.

[@scottwallace1689]

Hilarious. The device tells you to wait 20 seconds before pressing the button, but doesn't time it for you?! Does it come with a hand stopwatch? Good indicator of design quality right there..

[@John-ro2yk]

I have a model below this, a CHMT36VA, no screen so the control interface is through your computer running their software. The build quality is actually pretty decent. The software, particularly setting up a run is pretty clunky. I've counted to five and that is enough time. I think it is to cover the time needed to load the file. I think 20 seconds is to cover something with a very large number of components. I've not tested that yet.

[@MG_tech_word]

Hiii

[@VictorSamuelMosqueraArtamonov]

Don't buy a charmhigh

[@shanekent249]

There has been a lot of issues with Charmhigh lately, so I completely understand this comment. I will say that I’ve had nothing but solid experiences with both their products and their customer service. There really aren’t any better options when looking for systems at this price point.

[@colormaker5070]

Charmhigh sold a defective machine to Unexspected Maker and would not repair or replace. Do not buy, check out unexpected maker channel and see for yourself.

[@shanekent249]

Absolutely. I've been following that story since it broke and it's definitely unfortunate. I've had nothing but positive experiences with Charmhigh, but each customer needs to make up their mind about whether or not they will trust Charmhigh with their business. If you want a more trustworthy company, then I would look for more expensive brands in Europe and Canada.

[@lessard2020]

@@shanekent249 Unexspected Maker's machine was with feeders a totally different machine with 4 heads and he started on the Charmhigh 48VA, and loved it.

[@DzpcbElectronicWorld]

Yes we all know that story, but now in 2024 when you see the range of pick and place made by Charmhigh, it's totally at another level. I think that Charmhigh is the most fast growing pick and place manufacturer with maybe Bovi. I have now a CHM-T48VB and thinking acquiring a bigger model and I hesitating between Charmhigh and Bovi.

[@JohnnyFive626]

Do you have a video of the step before this?