How to setup CH6 (Aux) on an OrangeRX T-SIX transmitter

  Рет қаралды 35,690

MakerDrone

MakerDrone

Күн бұрын

Пікірлер
@scottokane5499
@scottokane5499 8 жыл бұрын
Thank you, mate. This has been annoying the hell out of me since buying a quad lately. Much appreciated!
@anime2485
@anime2485 9 жыл бұрын
Thank so much for taking the time to help others. I'm setting up my first model and was seriously confused. Working perfect now!
@bitsinmyblood
@bitsinmyblood 7 жыл бұрын
Thanks very much! I'm new to quad copters. I started with 3d printing some little micro 110's, then I build a ZMR250 that I'm currently learning on. I got this t-six, which has a good price point for a beginner. I've liked it, fine. It's tough learning to fly aco, though. Very difficult. I'm trying to get my PID figured out. I've been wanting a "safety switch" which will put me horizon and angle mode. This video is exactly what I needed to set up the sixth channel. Thanks, again!
@darrensontos1012
@darrensontos1012 8 жыл бұрын
Thank you so much! I had no idea why I couldn't find any aux channels! This is perfect!!
@TheToadskin
@TheToadskin 10 жыл бұрын
Thanks for that. I've been busting my head trying to figure that out.
@swishpan
@swishpan 10 жыл бұрын
Thanks a lot for taking the time to make the video. Helped a lot with my Octocopter and KK2 setup.
@nduncan81
@nduncan81 9 жыл бұрын
So glad I found this. It saved me a ton of time. Thanks so much for posting.
@xDarrell
@xDarrell 8 жыл бұрын
You fantastic saint! Thank you so much! Function List > Flaps > Flap Norm = +100 & Land -100 worked perfect!
@johnrobertson7583
@johnrobertson7583 10 жыл бұрын
Thank you for taking the time to engage this issue.
@koksaldemirdag
@koksaldemirdag 10 жыл бұрын
Thanks for the simple and clear instructions
@analog56x
@analog56x 11 жыл бұрын
THANK YOU!!! thank you so much for this video! i thought my TX was faulty... excellent video bud, thank you!
@R9000
@R9000 7 жыл бұрын
Thanks so much, dude! I don't have a multirotor, but I needed those two switches real bad.
@waynesworld1396
@waynesworld1396 11 жыл бұрын
This also worked for my spektrum dx6i... thanks alot
@Transportman
@Transportman 9 жыл бұрын
Thanks for that been wondering how to do this for ages👍good video
@ludodg
@ludodg 10 жыл бұрын
addendum: When in Heli-mode, the same problem occurs: no channel 5-cativity. Go to Function List --> Gyro and switch Rate 0 tot 0% (in stead of 50%) and Rate 1 to 100% (in stead of 50%) Now when you go to the MONITOR-menu you can see Channel 5 being used by the Flaps-switch
@jonathonbrown216
@jonathonbrown216 11 жыл бұрын
I sent mine back 2 time and known you show me that it was OK THC your are a great help
@Blackfootamputee
@Blackfootamputee 8 жыл бұрын
I am new to this hobby ,what is the 5th channel (aux) used for ?
@pedroriquelme8330
@pedroriquelme8330 7 жыл бұрын
Please how I program the reverse in the thro ??? thanks best regards
@Squad61
@Squad61 11 жыл бұрын
I just received my T/six. This video is great. Just what I needed. Now I have to find out why Modelmatch isn´t working. When I select model 2, after binding model 1 in the transmitter the receiver of model 1 will still respond to the transmitter. That can´t be right!
@collingwoodboy
@collingwoodboy 3 жыл бұрын
Hi, I have just returned to model making after my retirement, I have a HobbyKing Orx T-6. Everything works fine EXCEPT the ailerons. The right-hand control has no effect on the ailerons on the monitor the pointer does not move. I must have at some time made an adjustment that has affected this. Please can you advise how to return this to travel left and righthand travel. I hope someone can help with this. the local hobby shop is not keen to help because I purchased this from HobbyKing.
@1man1nja
@1man1nja 11 жыл бұрын
I figured it out. I find that I prefer using a throttle curve over a linear one. In order to do that you need to use heli mode. channel 6/aux is gone but you can get channel 5 back by going into the settings and turning off gyo on the orangerx. allowing you to use it for autolevel or something else. The gyro switch on the controller will turn channel 5 off and on after.
@1man1nja
@1man1nja 11 жыл бұрын
Any ideas on how to do the other side of that??? get channel 5 working in heli mode. this would allow for throttle and pitch curves while still having and aux switch for auto level or something.
@Politicallyhomeless957
@Politicallyhomeless957 8 жыл бұрын
Your video is a blessing 👍👍🤘👏👏👏
@TheWakeboarder99
@TheWakeboarder99 10 жыл бұрын
You saved my life!!!!!!!Thank you!
@JorgeJimenez2020
@JorgeJimenez2020 5 жыл бұрын
Thanks for the video, very useful.
@40newark
@40newark 10 жыл бұрын
Thank you, this issue was driving me nuts
@gallownumber18
@gallownumber18 11 жыл бұрын
what does Aux do on a tricopter?
@teguhzakaria8345
@teguhzakaria8345 5 жыл бұрын
can use for rc car?
@semtech30
@semtech30 11 жыл бұрын
My gear switch on monitor does not work. How would I activate that or is my switch pooched ?
@archieaffenarsch
@archieaffenarsch 10 жыл бұрын
Thank you VERY much. I can finally use my video switcher for FPV.
@alexis9200
@alexis9200 8 жыл бұрын
Hi ! I've build a micro brushed quad with the F3 EVO FC, Tint DSM2 receiver on UART2 and bound my T-Six to the receiver (steady blue light) but I get no response when I push up the throttles. I've flashed Cleanflight and now trying betaflight but it doesn't change. Do you have any idea ?
@Politicallyhomeless957
@Politicallyhomeless957 8 жыл бұрын
Did you get it working?
@alexis9200
@alexis9200 8 жыл бұрын
Dobes&Drones yes but I'm not sure which solution soved this problem xD ... (got so many troubles ...) send me a mail so I will list you all I've done: alexis.esteves.ae(at)gmail.com
@alexis9200
@alexis9200 8 жыл бұрын
so now I have more time: after binding my tiny receiver to my T-Six, the quad couldn't turn on because I had to set the arming position in Betaflight (or cleanflight) AND, the biggest trouble was that my transmiter minimum and maximum position didn't go from 1000 to 2000 in the receiver window in betaflight. I had to input the command: "rxrange reset rxrange 0 1049 1879 rxrange 1 1052 1879 rxrange 2 1049 1879 rxrange 3 1069 1879 save" you must change the rxrange to the limit position of your transmiter when you move the sticks and take the numbers show in betaflight to replace the "rxrange". roll 0 pitch 1 yaw 2 throttle 3 I also got trouble with connecting my FC to my PC and I solved in this thread: www.rcgroups.com/forums/showthread.php?2795240-first-brushed-build
@Politicallyhomeless957
@Politicallyhomeless957 8 жыл бұрын
Alexis Esteves Sounds like your attacking the problems with good solutions. I empathize with your frustrations. So you are flying now? What issues are you currently having? With my. GB100 I had to go in Clean Flight and change my gyro and accelerometer to CW 180 degree switch under config. That solved the flipping over and started some nice flying. The P I D's are still garbage. When I yaw the quad wants to pitch hard. I played with the trims and the pids and it is getting allot better... that was until a motor pushed out the bottom... lol. A project for tomorrow I guess.
@Politicallyhomeless957
@Politicallyhomeless957 8 жыл бұрын
You have your modes set right? Arm on one Aux channel and then angle and Horizon on another?
@cowza3
@cowza3 10 жыл бұрын
Thank you very much for this vid,its very helpful
@semtech30
@semtech30 10 жыл бұрын
That's great. Can't get my channel 5 to move on the Monitor setting. ?? What functions this ?
@johnrobertson7583
@johnrobertson7583 9 жыл бұрын
semtech30 As he said, Ch5 is the fmode/gear switch in the acro model. The tx comes that way. Sorry no other answer.
@semtech30
@semtech30 9 жыл бұрын
John Robertson Got it man. I took a chance and changed out that toggle for one in a spectrum unit I wasn't using. The darn switch was faulty since new. Works great now. Ch5 is up and running.
@alex-pope
@alex-pope 9 жыл бұрын
Do you know if it is possible to reset to factory defaults? I cant find info on this anywhere
@anime2485
@anime2485 9 жыл бұрын
+Alex Pope Press the "LIST" button, scroll to page #2, select "COPY/RESET", and now select "RESET" to delete preset models. Good luck
@mikeberg22se
@mikeberg22se 6 жыл бұрын
Thanks alot for posting this!
@boudin4evr
@boudin4evr 10 жыл бұрын
I bought this transmitter for a blade 200qx does anyone here fly that quad? what are your settings? I cant figure out how to get to agility mode(red) thanks
@1989samir
@1989samir 10 жыл бұрын
One like from me for u, thanks for solving same issue here. Much appreciated
@modestmex
@modestmex 7 жыл бұрын
thanks man this helped a lot!
@braveapollo5872
@braveapollo5872 11 жыл бұрын
I had the same problem and after a while I figured it out.
@johnstone5380
@johnstone5380 4 жыл бұрын
What is the cost of those the 6 Channel and do they have a 9 Channel and what do they cost what do you get with them do you get a receiver with them thank you for all you are time helping us out
@rainmaker27minecraft
@rainmaker27minecraft 10 жыл бұрын
thank you! great video!
@Dietervsw
@Dietervsw 10 жыл бұрын
Great Video! Thanks
@omarm.9710
@omarm.9710 11 жыл бұрын
god bless you I needed that a lot
@tangmark75
@tangmark75 10 жыл бұрын
thank you for the video....
@solochad11
@solochad11 7 жыл бұрын
Thx man, been buggin the hell outa me
@GregoryMeyerWho
@GregoryMeyerWho 6 жыл бұрын
You rock dude!!!!!
@derekinPhilippines
@derekinPhilippines 9 жыл бұрын
saved my bacon thanks mate.
@markt4646
@markt4646 6 жыл бұрын
THANK YOU!!!!!!!!!!!!!!!!!!!!!!!!!! YOU ARE GREAT:)
@johnrobertson7583
@johnrobertson7583 9 жыл бұрын
If any of you are tinkerers, you can watch a video by stephentack where he describes exactly how to make a quadcopter specific radio, which functions like curtis youngbloods having a rotary gimbal added to the right stick, and the left is just throttle. I bought my T6 specifically for that reason. The mod entails a $5 rotary 3 axis gimbal.
@fgxtreme
@fgxtreme 9 жыл бұрын
top stuff, thanks.
@rodinabartosu
@rodinabartosu 9 жыл бұрын
Thank you very much!!! :-)
@alexanderbartling9461
@alexanderbartling9461 10 жыл бұрын
Thank you so much :)
@Irontech25
@Irontech25 11 жыл бұрын
Good video thank you
@ningyuanzhang6976
@ningyuanzhang6976 9 жыл бұрын
Thanks a lot!
@pc.chameleon
@pc.chameleon 9 жыл бұрын
Thanks!
@sanagnos123
@sanagnos123 10 жыл бұрын
thanks for that
@finlaygilbert7280
@finlaygilbert7280 10 жыл бұрын
i love quad cockters lol
@JSprayaEntertainment
@JSprayaEntertainment 8 жыл бұрын
i dont need it to work for a quad copter XD
@darrensontos1012
@darrensontos1012 8 жыл бұрын
Thank you so much! I had no idea why I couldn't find any aux channels! This is perfect!!
@dyaginuma
@dyaginuma 8 жыл бұрын
Thanks!
First Look: Orange Tx6i DSMX Radio
12:47
Painless360
Рет қаралды 13 М.
DJI F550 Hexacopter crash after flight above the clouds
10:55
Stefan Ekstam
Рет қаралды 15 МЛН
Правильный подход к детям
00:18
Beatrise
Рет қаралды 11 МЛН
BAYGUYSTAN | 1 СЕРИЯ | bayGUYS
36:55
bayGUYS
Рет қаралды 1,9 МЛН
Une nouvelle voiture pour Noël 🥹
00:28
Nicocapone
Рет қаралды 9 МЛН
Orange Radio TX6i - Simple 'Plane Setup
17:11
Painless360
Рет қаралды 17 М.
Build Your Own Drone Tracking Radar:  Part 1
20:08
Jon Kraft
Рет қаралды 600 М.
ORANGE RX TX6I DSMX TRANSMITTER
10:49
CK One
Рет қаралды 7 М.
Setting up a mix on a Spektrum Dx9 throttle /elevator mix.
5:53
Mark Croucher RC
Рет қаралды 838
Tips Bench - Binding Your OrangeRx Receiver
4:28
HobbyKing
Рет қаралды 35 М.
The Truth About Orange Hobbyking Receivers!
6:04
sdssteward
Рет қаралды 18 М.
When a B-17 Tail Fell With a Gunner Inside
14:08
Yarnhub
Рет қаралды 5 МЛН
BlueROV 2 build guide - most advanced amateur submersible!
20:33
Правильный подход к детям
00:18
Beatrise
Рет қаралды 11 МЛН