How to setup on screen stats in games with MSI Afterburner and RivaTuner.

[@tommac3010]

Dont forget to "Enable Benchmark Mode" if your FPS are not showing min max avg. Go to rivatuner click setup < general < scroll down halfway in compatibility properties.

[@ram100677]

Thanks man. This comment made me focus on the “Benchmark” aspect of the min max fps. I didn’t find it in setup/general for some reason (im prolly overlooking it) but under benchmark tab I selected new hotkeys for begin-recording/end-recording and that it go it to work me. Finally lol

[@prostekai]

Thank you so much, I already thought that I'm just dumb.

[@submitname9264]

Thank you so much man! Was going crazy about this!

[@haechqn]

thank you so much!!

[@flxshaep632]

thanks g

[@INeedsMoneys]

pro tip: use compressor on your voice recording. You speak with a wide variety of volume. Raise the low levels so that we can hear what you are saying. thank you

[@RayanTurkman]

That is what I was going to say.

[@AnonymousUser106]

@@RayanTurkmanGoats

[@RAY_FILET]

​@@AnonymousUser106goat has absolutely no meaning anymore.

[@AnonymousUser106]

@@RAY_FILET Yes, adapt.

[@RAY_FILET]

@@AnonymousUser106 No

[@matthew78917]

Why is it that it's always the nice small streamers that sometimes make the best underrated tutorials

[@Sonicstillpoint83]

Huge help. I needed this for troubleshooting and it has been years since I’ve use this so I couldn’t figure out what steps I was missing- it’s always the little things. 😊 Never stop learning guys.

[@masterskilhollow]

This guide is exactly what I needed. You're clear and concise, making it easy to follow, even for someone less-than-brilliant with software. Thank you so much for making this. Cheers!

[@TechLabUK]

No problem. Glad it helped.

[@RaiyuCinema]

Thank you so much for this guide! I kept fiddling around in Rivatuner and didn't realize I had to configure it inside Afterburner 😅. I'm excited to finally use this tool! Clear and straight to the point-great video!

[@TheRealAsifIcare]

...only if all YT VODs were like this one of yours man! Straight to the point! All one needs!

[@ddjohnson9717]

3:11 the list shows no frame rate option, any way to solve this?

[@garypullings5499]

I have been looking for this for so long, Thank you

[@bartegexe8182]

Thank you for this short but solid tutorial

[@RafnII]

Toggle on screen display shortcut does not work for me. Any idea why?

[@binsoytv]

Thank you! That helps a lot especially for a newbie streamer here. 👍

[@TechLabUK]

No problem 👍

[@rymdskrotet]

What a LOT of people dont know, me included is that capping via Riva Tuner is different from capping in game or in Nvidia Control Panel. It just works. No stutters for me, capping Flight Simulator to 64fps (60is on the limit for a gsynce compatible screens can handle without tearing, stutters - even though my screen should work don to under 50. It does NOT) . So 63 fps, and superdupersmooth! No vsync needed in NCP either (id just didnt get better). I still have som random occational stutters and freezes, but I think it has to do with the game, and Microsoft servers. But for now Im happy! Going from 144 gsynced to this i like open the door to well...alice in wonderland. A big suprprise (fon weird cats here though).

[@lateralus6512]

Thank you! I just reinstallled Windows and I couldn't remember how to set this up like I had it before.

[@Secret_Agentman]

Nice and to the point, thank you, one question though, what is the untick all option when selecting your graph options. I see you added all and removed all by using some sort of shortcut.

[@TechLabUK]

You can hold ctrl and select what you want or hold shift and select a range.

[@Loppy2u]

Thank you i didn't know about all these options. Just only managed the default on-screen display.

[@TechLabUK]

There are much more but kept the video light for beginners. If you want to know more feel free to join our Discord Community and we can discuss: discord.com/invite/Dx7xZt5MHF

[@henrylevi3836]

I watched this whole video in the hopes of finding out how to actually bring up the riva tuner statistics window. cheers.

[@esji5109]

Straight to the point tutorial, love this thanks.

[@TheControl]

I only have a small problem now. How will I know which fps counter is the avg, 1% low and 0.1% low?

[@ppparty4932]

The data/numbers does not show up in game for me

[@Bugv]

CPU TEMP, CLOCKS, etc bunch of others don't seem to be showing anymore. They used to show..

[@countingsheeple2428]

Me neither....and no one seems to know. It would be nice if MSI had an in depth tutorial on this software,, so that we didnt have to rely on guys like this, who dont respond when theres something abnormal.

[@dengodesign9511]

thanks man i have been looking tutorial like this 🎉🎉🎉🎉🎉

[@TechLabUK]

No problem 👍

[@jment34]

I got it working but how can we set the names? I can view the get fps avg, 1%, 0.1% lows etc but they are shown as just numbers no text in front indicating what the numbers mean.

[@madcatmk213]

thanks mate, i just got my first gpu which is a rx 580 and i wanted to check the temps, thanks!

[@RealHaydn]

I can’t get it I must be doing something wrong

[@fonta1009]

same

[@jdiigs3597]

Big help, thanks so much for the video!

[@puzzley3434]

what command i can use to made it, staright line. cos i only use temp and FPS monitor for all daily gaming.

[@ДенисРындин-к5ю]

A very interesting video, thank you for the accessible and understandable information about the project, I will try myself in it, I recommend it to everyone!!!!!

[@AexoeroV]

Thanks, other peeps dosent explain how to group some stats and some to be shown separately!

[@mikesunboxing]

just made my job easier 👍👍

[@TechLabUK]

Someone asked me if I had a saved config for the setup due to running it on so many systems for benchmarking. I actually don't and never thought about it because I have repeated the process so much now it's instinct lol Glad it helps though and thanks for watching.

[@countvonaltibar236]

Nice explanation of MSI ab and rivatuner

[@JoaoAntonioDiasTonet]

what cpu clock is showing? an average of all cores clock?

[@Project-ux4si]

Option to view in On-Screen Display doesn't show for some reason.

[@alcoone1403]

I have a question: Some time ago, I don't know what settings I changed, and instead of displaying D3D12, it displays OGL. Any idea why that is?

[@TechLabUK]

If you leave the FPS counters names as default they are displayed as the API's that game uses I believe so DSD12 would be that that game is using the DirectX 12 API's. So maybe different games are showing different things or you changed the API that game is using in it's settings or something.

[@youandiryan]

Fabulous video man thank you so much this worked great for me

[@Wille7564]

How do I make it so that Framerate average only show the average over the last 10 seconds instead of since I launched the game?

[@InfamousAMH]

It just straight up doesn't work. Is it a limitation of my Radeon Pro WX card?

[@heh2k]

No, I have a 4090 and this garbage simply does not overlay anything. I've spent an hour trying to get it to work.

[@countingsheeple2428]

@@heh2k same for me.

[@qxndy]

@@heh2k calling a 4090 garbage is crazy work

[@AlmostBrokeLbs]

didn't know that theres that more options, I just used stock ones

[@TechLabUK]

There are loads in there as long as you have the right drivers installed. A lot of the GPU isn't present if they are wrong.

[@f3ds.]

How do u use it with Microsoft store games???? It doesn’t work

[@NGreedia]

I followed the steps but it doesn't display average, 0.1% and 1% lows on the overlay

[@TechLabUK]

Set a hot key under the benchmarking tab and hit that in game and the averages will appear.

[@NGreedia]

@@TechLabUK Tried that, but it shows the average FPS, doesn't show 0.1% or 1% lows. setting a hot key doesn't seem to disable or enable the overlay either for some reason. it's always on and always displaying the same information.

[@TechLabUK]

@@NGreedia What hot keys are you setting. I have had issues with assigning some keys although Ctrl-Num1 (2,3,4,5 etc) seem to work ok as long as numlock is on.

[@CzCorrupt]

My app has a flashing thing on the side thats making me want to vomit. Idk how to get rid of it

[@periloustactic]

Is AB not being hacked these days? Right from MSI's landing page. I'm using 4.64 that I saved some time ago. It looks normal. The installer icon looks very suspect, It's a shape of a windows form with a small red circle in the bottom right with an arrow pointing down. It's not the normal MSI icons I've seen over the years.

[@magnetmat]

How do I set it up to automatically get the GPU and CPU names, I mean when upgrading cards I don't want to keep on changing the group name everytime

[@TechLabUK]

@@magnetmat Not sure if you can, I have to change them every time I benchmark a gpu etc and it only takes a few seconds.

[@Clawson12g]

I see an option to display to the logitech LCD keyboard screen. I was wondering if it was possible to display it to the ROG Azoth keyboard screen. I only selected the box and it did not work. Do you know what I would need to do to make it work by chance?

[@TechLabUK]

No idea, never used a KB with an LCD.

[@turinhorse]

how do i move to OCD to another monitor?

[@jesseramon4880]

Thank you very much for the video !!!!

[@TechLabUK]

No problem 👍

[@Redridge07]

Help ... the framerate avg, , 1% and 0.1% do not show. Any thoughts?

[@TechLabUK]

For the averages you have to set a hotkey under the benchmark tab in Afterburner settings and hit that hot key when in game. The averages will appear.

[@Redridge07]

@@TechLabUK thanks, hugely appreciated

[@robdc4829]

@@TechLabUK Aha!! Yes, this step is needed.

[@furkansantimci9240]

Hello, can we see the liquid cooling pump speed, cooling water temperature and CPU fan speeds with MSI afterburner?

[@TechLabUK]

I am pretty sure you can do some advanced configuration on it to show anything that has a sensor but I have only ever used what it comes with out the box.

[@chris_hertford]

Excellent guide!

[@TechLabUK]

Thanks and thanks for watching 🙂

[@abdulqahar2943]

thanks bro i really looking for this

[@TechLabUK]

NP, it doesn't work with all games tbh, some need additional configuration but for 99% of games it works great.

[@Amin_2k]

Thank you so much for this!

[@sleepy_szn]

Does this work on any application other than games

[@TechLabUK]

Not a 100% sure. Ribs tuner is what’s really providing the overlay and I believe uses hooks into the Direct3D it detects running so might if an app uses these apis but never tried it.

[@ShebanFPV]

‘FPS Average’ is average in which timeframe? Overall or in 1 minute?

[@TechLabUK]

It will be over the complete benchmark you run. You can set p hotkey's within the configuration to stop and start the benchmark and these will be reset when you do it and the averages are over the length of your benchmark.

[@ShebanFPV]

@@TechLabUKmany thanks

[@szutekgraphics126]

Very helpful for me, thanks.

[@shuny11r23]

The Framerste option doesn't show up for me 😢

[@oniesma]

May I know how to show GPU temperature. Mine doesn't show in the monitoring list.

[@larryjohnson8168]

How do you show the temperature

[@ZheIncFox]

With all this setup what is the easiest way to record my gameplay with the OSD stats visible in the recording? Things like OBS don't work..

[@TechLabUK]

You can record gameplay directly within MSI afterburner if you want. Setup a hot key and save location in the Recording tab I believe.

[@Juniorgalle21]

Great video bro! Question why doesn’t MSI let me enable Benchmark? Not even to set a hotkey. I have Rivatuner installed.

[@TechLabUK]

It should work, not sure of the specs though. It's sometimes weird with unusual hardware.

[@Juniorgalle21]

@@TechLabUK what should I do then? Uninstall?

[@TechLabUK]

@@Juniorgalle21 Could try re-installing it in case there is a newer version. Also worth testing another game as some of them are weird like CSGO requires additional configuration etc.

[@Divice_]

great video, thank you

[@TechLabUK]

No problem, thank you for watching :)

[@IForimperiumm]

My OSD is not working

[@fonta1009]

me too

[@odin9338]

Thanks mate! like and loved it ^^

[@Loftiii]

How did you get it to look like that?, even though OSD was on a few things were not displaying.

[@gorancavar6636]

Same, did u figure it out?

[@TechLabUK]

What elements are not showing?

[@laneweatherbee2232]

I followed all these steps, but for some reason the OSD is still only showing the current frame rate (no average or 1% low, 0.1% low.) I've gone through the steps a few times but it still isn't working. Any ideas?

[@TechLabUK]

In the benchmarking tab of the settings, set a hot key to show the benchmark and hit that in game and those averages will display. You can also set a reset hotkey to reset them in game as well

[@vai_-cn9br]

Thank you dude!

[@TechLabUK]

No problem!

[@andrew1580]

best video ever :) thanks

[@TechLabUK]

Thank you :)

[@laurent1512]

Good straight to the point, bullshit-free tutorial for beginners. Thanks.

[@Trai1b1aze]

As soon as I started afterburner for the first time it populated all my card details (gpu speed, memory speed, voltage, temp, power limits, fan speed etc) into the app. This is different from your example shown at 2min44secs where nothing is populated into the app. Is this normal? is there a way to prevent this info from updating? (I just want afterburner/rivatuner for in-game monitoring of fps, gpu temp, cpu core temps, not Overclocking capability). Thanks!

[@TechLabUK]

MSI Afterburner will / should populate those things, just on some things it doesn’t work. The overlay will work the same though.

[@NussyTV]

Dont work. following step by step. and when i press "apply" nothing happens :/

[@thetimeisrite]

I followed the steps exactly but the only thing showing up is framerate. Any help?

[@TechLabUK]

Set a hot key on the benchmark tab to start and stop the benchmark and then the ready will toggle on and off.

[@Bacbi]

How do you increase the size? It's miniscule in my corner and it doesn't show all five just current fps and frametime

[@TechLabUK]

In riva tuner there is a slider to change it's size.

[@Squallmannen]

Not working for me, Im playing csgo2 with 4:3 resolution in fullscreen black bars. Did this exact thing but no fps showing up.

[@TechLabUK]

The overlay won't work with CS without a little more configuration. Add "-allow_third_party_software" to CS's launch options and then create a new profile in RivaTuner pointing to the CS exe and it will then start working.

[@classicalmusic3979]

The average does not show at all for me

[@TechLabUK]

@@classicalmusic3979 Did you set a hot key for the benchmarks? These don’t always show and as they are technically part of the benchmarking you get set a key under that tab to turn them on and off again.

[@wallet-warrior-1]

theres no fps thing or show on screen display for me

[@bpc8381]

If you close rivatuner after opening it, does it remove the icon from the hidden icon tray?.

[@TechLabUK]

I believe it does. You need to just minimise it and it will return to the tray.

[@bpc8381]

Thank you! Great video by the way.

[@Ananyyaa_]

hii i installed this and after intsalling it startd downloading some direct x 2009. i just wanna ask is it safe coz directx installation part wasnt there in your video sooo...

[@TechLabUK]

I assume it's because it need specific libraries from that version and as it wasn't already installed it got them for you. Most steam games will do the same if it doesn't detect it already being there. As long as you got it from the MSi website as shown in the video then you are fine.

[@Ananyyaa_]

@@TechLabUK got it . Thank you ❤️

[@Thunderhawk51]

How do you make avg, 1% low and 0,1% lows their own stat so they won't be next to each other without name? I want them to be on top of each other.

[@TechLabUK]

Usually you give them separate names and they will stack on top of each other not sure how you would do it without a name.

[@officialyashvirgaming]

use next line or

[@sayemhossainsajib9658]

lifesaver tutorial

[@TurboD16z6]

How do you do it on a second monitor. That's the one thing no KZbin ever mentions. You would think this is the first thing they mentioned. Nope . Guess when you want things done you have to do yourself

[@TechLabUK]

The overlay hooks into the game not the monitor so it should display where ever the game is, even in windowed mode.

[@MiyakoTsukino]

When I click to group and show all the fps things. It only show the framerate and non of the others.

[@TechLabUK]

As long as they are enabled they sometimes don't show until you turn on the "Benchmark" as that's what they are effectively doing. In Afterburner settings go to the "Benchmark" tab and set a hot key up to start and end the benchmark. When in game hit the hotkey and they should show. Ending should pause them so you can store them.

[@indigo4438]

Perfect content 👍

[@droidhacking]

Are you able to get it on 1 line like the Steam deck?

[@TechLabUK]

You can configure it how ever you want. Just give all the items you want on the line the same group name.

[@sgardoboff5547]

does it work on laptop? i did everything right but its just not working

[@TechLabUK]

It should work on any device tbh

[@sgardoboff5547]

@@TechLabUK i tested it further and i found out that it only works in some games. it doesnt work in roblox for example which i saw it worked for others. idk why

[@TechLabUK]

@@sgardoboff5547 Ahh some games require additional launch options. Like Counter-Strike etc. Look up what Roblox requires for Afterburner Overlay to work.

[@emporioalnino4670]

Did everything the vid said now the OSD won't turn on. RTSS and Afterburner both busted

[@AbsolutKeinAim]

I have a laptop with a Geforce GT 740M. Can this program run on my laptop?

[@TechLabUK]

No reason why it wouldn't.

[@AbsolutKeinAim]

@@TechLabUK i installed MSI Afterburner and RivaTuner. Set everything up as you explained in the video but somehow i don't have access to the same settings in the Nvidia control panel as you have. Maybe my laptop is just too old

[@AbsolutKeinAim]

I tried updating the drivers but that made no difference.

[@TechLabUK]

@@AbsolutKeinAim We never accessed the Nvidia control panel or are you talking about the demo at the start where we showed Nvidia's built in overlay?

[@AbsolutKeinAim]

@@TechLabUK Yes that one. Sorry

[@rOlzatv]

hey why does river tuner dosnt show?

[@countingsheeple2428]

if you close it, you have to start it by finding the exe in the rivatuner folder in programs...then pin the shortcut to quicklauncg/taskbar

[@joshuaflowers736]

how did you untick them all? @7:10

[@TechLabUK]

Same as any windows app really. Click the top one, hold shift and click the bottom one will select them all or hold ctrl and click which ones you want and only those will all be clicked.

[@najeebsini]

Everything setup. But don’t show in screen 😢

[@MisterPickle.]

One question. Why does my PC always ask me if I'm Finish? I'm from America. Great video BTW helped out alot. 🤘🤘

[@TechLabUK]

I have no idea why your PC does that. Has the language on the OS been changed at some point or something.

[@MisterPickle.]

@@TechLabUK LOL. It was a joke. Kinda like the old one. c:.\DOS Run>DOS run. Sorry im a nerd 🤓

[@TechLabUK]

@@MisterPickle. lol you got me. I shouldn't reply to comments when I am tired LMAO. You cheered me up though so thanks :)

[@Amin_2k]

3:03 how do you quickly untick all like this?

[@TechLabUK]

You can hold shift or Ctrl and multi select.

[@priyanrock679]

Thank you

[@jment34]

It's still not working correctly. Only the basic stats are displayed despite me having selected others like 1% and 0.1% to be displayed.

[@TechLabUK]

Set a hot key under the benchmark tab to toggle those on and off. Sometimes they don’t come on automatically.

[@jment34]

@@TechLabUK I enabled benchmark mode and it kinda works now still not the way I want. Are there an alternatives to msi afterburner?

[@TechLabUK]

@@jment34 Every GPU software comes with it's own version but they are often much more limited.

[@kae2678]

It doesn't show up in any game for me, I even put the detection to high

[@TechLabUK]

Some games it won't work with straight away but other than that did you set a hotkey to toggle it on and off? Sometimes it's defaulted as off, failing that re-installing Afterburner can resolve issues like that.

[@kae2678]

@@TechLabUK yes I was spamming it in every game but nothing shows up

[@kae2678]

I'll try reinstalling sigh

[@countingsheeple2428]

@@kae2678 did you ever figure it out? i cant get it to display in any of my games either. I tried a hotkey and also reinstalling afterburner/rivatuner.

[@VaLeryTanaya]

2:39 for future me who somehow forgot how to do this again.

[@sidhantjasrotia220]

nothing shows up when i hit apply, i did exactly the same things

[@TechLabUK]

Did you set a hot key for toggling it on and off?

[@runkbaz4907]

yes but it doesnt work@@TechLabUK

[@countingsheeple2428]

@@runkbaz4907 same for me. nobody knows...

[@Onions0]

no mater what i do only curest fps showes every thing else like c % mhz is fine but avg fps 1% lov r not there for some reason

[@TechLabUK]

Sometimes specific data fields for components don't show, I think it's down to the sensors and things the program can find. For the additional FPS items, they are technically part of the "Benchmarking" functionality. In MSI afterburner settings, go to the "benchmark" tab and set a hot key for starting and stopping the benchmark. Hit that when it's up and they should show.

[@Onions0]

@@TechLabUK ahh it worked thanks👍

[@loopo8940]

These don't show when monitoring, what am i missing? Framerate Avg / Framerate 1% / Framerate 0.1% low

[@TechLabUK]

You need to set a hot key to start the benchmark and hit that and they will appear.

[@loopo8940]

@@TechLabUK That works, thanks!

[@TechLabUK]

@@loopo8940 NP, Happy benching :)

[@Aj0nJon]

@@TechLabUK Unfortunately that didn't work out for me, however enabling benchmark mode in rivatuner fixed that issue.

[@Hollywood1127]

Mine did not show up? Someone please help me.

[@sunmaw108]

Same here.

[@countingsheeple2428]

@@sunmaw108 same here

[@Amin_2k]

That build is way to cute.

[@TechLabUK]

🙂

[@Nick-gu4pg]

Why on Windows 11 not work?

[@countingsheeple2428]

cuz its more bloated $hit than win10

[@valianto]

thanks hughie