How to Setup, Use & Put Away Your Kranzle

[@marcusmaximus451]

I’ve had kranzle for over 25 years, very good quality product and I change the oil every couple of years, kind regards to you and take care, Mark from Billericay 😀😀👍👍🇬🇧🇬🇧

[@koroplum7525]

Thanks mate , new car groomer in NZ and didn’t know anything about the kranzle now mans got knowledge

[@banky4943]

I thought running the pump empty was only for frost protection . You've caused me to re-read my X-15 manual , and it seems that the pump should be emptied after each use . I'll follow the advice you gave to Danny Matthews a month ago . Many thanks , Malcolm .

[@thunder052006]

I kiwi the idea iiikjttooiikkjuikki

[@JordanandNike123]

Malcolm for CEO of Kranzle!!!! Awesome person you are!

[@KranzlePressureWashers]

LOL I wish I was the CEO of Kranzle

[@freshcryptojuice3790]

Hello. I have a kranzle k2160tst and i am looking to purchase a full kit to be able to connect a water tank to my kranzle pressure washer. Do u sell any of this kit?

[@tomasdubinskas]

Great tips, planing to buy 1050 ts, but the thing is my water is very dirty and hard, what filters would u recomend to use, so I woudnt destroy the pump immediately?

[@Sarnfaen]

Had my 1050 a couple of weeks now so very timely video, thanks. Bought it from aqua spray and very happy with the product and advise given before purchase

[@MrFotiskir]

Are you suggest the 1050?

[@Sarnfaen]

Yes very pleased with the machine, expensive but well built and easy to use. A bit on the heavy side so you could also look at the wheeled version. Would recommend you swap the original hose for the rubber version. If you are in the uk suggest you chat to the people at Aqua spray, they are very helpful

[@MrFotiskir]

Thank you very much!!!

[@KranzlePressureWashers]

Great to hear!

[@ThePasserGenius]

Hi, could u please let me know what is the pressure washer outlet? Is it m22 14mm or m22 15mm?

[@MieleTouchtronic]

I always run a little bit of pump saver through my Kranzle 1122TST after every use to displace all water out of the pump and keep the water seals lubricated. Peace of mind in a can!

[@KranzlePressureWashers]

Awesome im so glad people are starting to l👀k after thier machines

[@craftedballistics]

What is the name of that pump saver or is it just called pump saver? Thanks, just bought one and would like to maintain it as much as i can, thanks!

[@MieleTouchtronic]

@@craftedballistics I usually use Briggs & Stratton Pump Saver or Sta-Bil Pump Protector. I usually find them at Lowe's or Home Depot but you can easily get them online. I usually can get 2-3 applications out of a can. Just screw the adapter to the water inlet and give it a few sprays until all of the water is pushed out of the pump and replaced with the pump protector.

[@haffneralex]

Hey, thank your for the great content. Does that apply to the Profi 160? especially the Setup, it doesn't seem to let water go through if it not plugged in. Thanks :)

[@gilmour195]

Can you run these out of a drum of water or does it need to be direct from a hose?

[@brokenSnake]

Can this pressure washer siphon water from a bucket?

[@PeterEss]

Great clear video. Thanks so much!

[@fensterputzernuernberg]

Excellent and perfect explanation that !

[@stephane7961]

Thanks for all your advice ! My next high pressure cleaner will be a Kranzle K1050 TS T ... that's for sure! Too bad you are not close to my home (France)

[@KranzlePressureWashers]

you will love it 😍, i also wish i was in France 😜

[@hydewizard]

5:42 is it safe to run the motor dry for draining all the water out from the pump everytime I finished using my Kranzle?

[@KranzlePressureWashers]

Running a machine for a few seconds without water will not damage the machine 👍

[@ludwigrotin5891]

It won't, if only for couple seconds. The issue will be if you leave it running and it'll heat up the seals on the inside of the pump, then you'd have to replace them because it won't build as much pressure as it should.

[@onuraksoy4613]

Hi, Just a quick question. My kranzle build only 70bar pressure. Adjusting the valve doesn’t help to change the bar. What can be the reason? It is a new machine.

[@KranzlePressureWashers]

If the pressure is smooth it’s more than likely the lance nozzle worn, if you have a judder it could be valves, seals or even water inlet volume

[@onuraksoy4613]

@@KranzlePressureWashers thanks for your answer! Yes pressure is smooth, always at 70bar. But tried different guns to see the difference, no change. I am not able to make the pressure lower or higher…

[@spoku4996]

How does the procedure change with a 2160TST with a drum reel

[@AmnaBerberovic]

How do I handle the situation when I need to move the device from one place to another? (the other side of the car) do I unplug everything and do it again? Leaving the faucet running all the time is not the ideal solution.

[@KranzlePressureWashers]

You don’t need to do this ever time you move the machine, just ideally the 1st time you use it in that day and when you have finished for the day drain it👍

[@paulwharton1850]

Excellent video - Many thanks.

[@KranzlePressureWashers]

Many thanks!

[@TechBoxHD1]

Fantastic video - thank you for this

[@p8rdm]

Is it ok to store the 1152 laying down ?

[@LifeOfToyz]

Thank you for the great video, because I hate reading manuals...lol.

[@KranzlePressureWashers]

Thanks for your comment

[@captainsweatpants5229]

Who's watching this in 2024 after washing their car, just to see how to pack the machine up the proper way!😅

[@ronduartis5139]

Where do i get replacement o ring if mine burst in the connection to my spray gun

[@edwinnoort7661]

Can it be gravity fed?, (by a 400 litre watertank)

[@dannym670]

Whats the best way to empty the pump if connected to a hose reel? Should I run the machine until no more water exits the hose once disconnected from the gun?

[@KranzlePressureWashers]

take the gun off the hose, lay the hose coupling lower that the pump and run for a few seconds, when you put the machine away dont fit the gun to the hose especially if the temperature is expected to drop below freezing 🥶

[@oscarcat80]

Is there a specific type of hose to run the water from the tap to the water inlet? Many thanks

[@KranzlePressureWashers]

Always use a good quality water hose that doesn't kink or collapse on itself when it gets warm

[@leeweston7268]

Would be interested if you could do a similar video for a mobile detailer and what they have to do at the start and end of each day using a k7

[@KranzlePressureWashers]

Great idea

[@humbledgentileimage4448]

I can’t find the inlet filter on your website. Can you give me the part number please?

[@waynegto1484]

Just purchased the same machine and found your video very informative, the machine looks like good quality but the snow-foam bottle isn't good quality....once dropped I think it will break, unfortunately a cheaply made item for a premium price.

[@KranzlePressureWashers]

The original kranzle foam head and bottle is made from impact resistant plastic (I personally haven’t seen any broken ones) The bottles are made with a chunky course thread and heavy duty plastic more resistant crushing than others. They also made the foam lance to be compatible with all kranzle machine & made simple without chemical adjustments makes the only thing to go wrong is the high pressure nozzle to get blocked with debris (like small stones or split orings) this makes it the easiest foam lance to strip and repair

[@waynegto1484]

Okay thanks for that information hopefully it doesn't break, otherwise its a great machine

[@KranzlePressureWashers]

@@waynegto1484 it shouldn’t break but if it stops working I have a video on how to fix it

[@michealmph]

Is there a different method for shutting down and putting away the TST version?

[@KranzlePressureWashers]

just use this procedure is fine, i would take the gun off the hose before the final run to purge of water

[@niallkinsella6092]

I know this is an older video, but my 1050 keeps blowing the fuse in the plug? Any ideas?

[@terrytowelling6212]

I have the same problem. Make sure you’re using a sufficiently rated extension fully unwound. It might also be the seals internally depending on its age and usage.

[@bennimaj3139]

On my Profi 160 there is no water coming out when I press the trigger gun without turning the preshure washer on. Is that normal?

[@KranzlePressureWashers]

The profi 160 TST has a water break tank so no water from the main reaches the pump until you turn the machine on

[@bennimaj3139]

@@KranzlePressureWashers ok, thanks for your advice

[@p8rdm]

Is it ok to store my 1152 laying down

[@KranzlePressureWashers]

Yes no problem

[@harryboyer159]

Any videos of the 1152 TST coming soon?

[@KranzlePressureWashers]

yes i have plans

[@Stitchestv-mi8vq]

Anyone can tell me how you decrease the pressure mine as 1900 psi too much for car wash

[@KranzlePressureWashers]

The 1050 range can not reduce the pressure unless you change the unloader or change the lance nozzle kzbin.info/www/bejne/qoi0nX5jesaqhNEsi=GTJOouLh9qy_AFO8

[@melyoung4296]

How change the 0il on a 1050P and how mum old do i need thank you

[@KranzlePressureWashers]

Check this video for help. kzbin.info/www/bejne/g3ycdKhmm66Uh9E The machine will take 100ml

[@melyoung4296]

Sorry spelling mistake 😅

[@KranzlePressureWashers]

@@melyoung4296 🤣🤣 yeah just 100mums

[@Tayjuice]

Overkill deluxe, but we all have our ideas

[@TouringCar.]

Following all the advise and steps, it still blows a fuse every single time I use it. Plugged directly into the circuit for the house (no extension leads), pulling trigger before and during powering on, checking the flow of water is free from air before connecting. I’ve had cheaper Karcher machines that only ever faltered after years of use and were at their end of life. It’s a good machine once it’s running but I’ve to buy a packet of fuses for every time I need to use it. Seems there’s a lot of design flaws that need looking at if people can’t use a product without following all these steps and it still fails to operate successfully.

[@KranzlePressureWashers]

You need to get the machine looked at by the dealer you bought it from for a warranty repair. Continuing to use the machine while it has a fault may invalidate the warranty

[@TouringCar.]

@@KranzlePressureWashers I did. Brought it straight back and they said it’s a design fault, that the pressure jet needs to be held down when powering on or it will blow the fuse. It was serviced for €50 and some parts were replaced (a general recall I believe) but the fuses still blow when all steps followed.

[@kolbjornlie8545]

@@TouringCar. maybee you have 10amp fuse, maskin maybee need 16 amp from house..

[@TouringCar.]

@@kolbjornlie8545 using the max 13 amp fuse.

[@kolbjornlie8545]

@@TouringCar., in my place Norway its high pressurwashers who is made for 10 amp and 16 amp fuse. A Norwegian washer , AVA is made for 10 amp to model up to Ava 50 i think, and al maskin named ava over 50 need 16 amp fuse. I was thinking to buy a Ava 60 but nee to change to 16 amp fuse. And same if i buy KRÄNZLE k2160 tst i need 16 amp.

[@vishnudavbhat1848]

Hi