How to solve DDR5 X.M.P. not running at full speed.

So you spent that extra money and went for DDR5, but it wont work at the rated speed!? Hopefully this short description on how to solve the issue that DDR5 sticks does not run stable at full speed or with X.M.P activated will help you!
For solving 4 sticks 4:00
For a more in depth video on the 4 stick solution:
• Intel’s DDR5 problem r...

[@Lego-Adventures]

Thank you all for your positive feedback and collaboration so far.

[@asmongoldsmouth9839]

My Asus manual for a Z790 board says IN THE MANUAL, to use A2 and B2 first. So, that sounds weird that your Asus manual says use A1 and B1 first. XMP is only on A2 and B2 but my ram is unstable at the 7,200MHz that it is rated for. I ran MemTest86 on it for a week over and over. I can only get as high as 6,800MHz. On a 7,200MHz kit 😑

[@PolarAnt]

After a day of trying raising voltages slightly and lowering the speed step by step all to avail I found your fix and it worked first time. Thank you so much for posting this. My blood pressure has now returned to normal. If anyone wants to know I am using an ASUS ROG Strix Z690-E 2x with Corsair VENGEANCE DDR5 64GB (2x32GB) 5600MHz

[@martinwinkler5563]

I had the exact same problem on my ASUS Prime Z790 A MoBo however my fix was a slight variation of yours. When inserting the DIMM's into slot 2 and 4 the bios would not even boot up. I solved the issue by just inserting 1 DIMM into slot 2, go into the BIOS and turn on XMP 1. Then the stick would run at full 5600Mhz. After that worked, I put the second stick into slot 4 and everything has been working fine ever since. Thank you for this great video. Certainly helped me and sparked my creativity and problem solving 🙂

[@CurvedSlightly]

Thanks, I'll try that

[@pwaszkiewicz]

It works perfectly. Thanks for the help! (i7-13700kf, kingston fury renegade 6400mhz, mb asus z-790-a)

[@neobarox]

Yo bro u SAVE ME !!! 5 hours of booting, many of reseach ! And i find your video. Thx a lot mate. S/O from FR

[@mikesintuit801]

This actually worked for my 2 sticks of 16GB DDR5 7000. I was stuck in a bios loop for hours. Updated the bios on my Asus Rog Strix Z790 E-Gaming Wifi, defaulted all bios settings, switched sticks from A1/B1 to A2/B2. Switched profile to XMP 1 in BIOS. Booted up first time. Remember to safely update your BIOS too folks, that way your hardware can be properly utilized! Thanks again!

[@Lego-Adventures]

Thank you for the feedback!

[@Sami783]

Thanks a lot that's works for me also

[@barakkinarti5071]

Thanks to this video I was able to boot my memory at 5600 instead of the default 4000. Changing the memory to the 2, 4 dimm slots solved the problem.

[@Deelabit]

I've gone though a dozen videos looking for the fix, your video with the simplest solution is the one that worked

[@massimilianofontana]

The manual says clearly that with 2 sticks you have to use A2 and B2, this is true for almost every mobo with 4 slots

[@andreheinrich7443]

absolutely ....

[@Blaze_556]

got this to work for my 2 sticks of 16gb ram not enabling xmp on my asus z790-p mobo. switched ram stick to slots a2/b2, went into bios and changed to xmp 1 , saved and restarted and it fired right up. thank you for the video.

[@snowbearvodka5636]

Dude. Thank you so much. Ive just spent 8 hours building my new pc with a friend, and a keg of bourbon, and after all that, my asus prime z790 didnt wanna go 7200 on my gskill ram, from the qvl list. Your method totally worked, i just switched their placement. They should totally patch this. Thanks again❤

[@Lego-Adventures]

Cheers!

[@1rk1n]

Switching the slots for my dominator memory fixed the slots (a1 + b1 -> a2 + b2). Thank you much mang! (thumbed it up)

[@smeghead617]

this worked for me, im using ddr5 64gb 5600mhz 4 dims, when xmp is disabled my ram runs at 4000mhz instead of 4800mhz, when xmp is enabled i run at full speed 5600mhz, thank you for this you deserve a sub! :)

[@MrStealth232]

Hi. Whats your configuration?

[@Khungersumit]

having same problem, withn Z790, 3 G.skills DDR5 sticks 16,32 and 16GB (slots used 12,4) not able to enable XMP. currently running at speed of 4000MHZ, please help

[@teabag7979]

i saw on another video before that the naming order of the RAM slots is B1-B2-A1-A2... and you should load RAM in order B2-A2-B1-A1.... i.e. 2nd slot, 4th, 1st and lastly 3rd. The guy also said best to (if you using multiple RAM sticks) use sticks from same single multi pack of RAM stick and not to mix and match despite being seemingly same... and load in order based on the serial numbers on the sticks....i.e. if they end in e.g. ....4782, 4783, 4784 and 4785... load "...4782" in "B2", "...4783" in "A2", "...4784" in "B1" and lastly stick ending in "...4785" in slot "A1"...hope this makes sense. He said it is "best practice". If i find the link i will share.

[@PlXELPUNK]

CORSAIR VENGEANCE DDR5 RAM running in XMP at 6600MHz thanks to you! I can't believe I have spent so much time troubleshooting this.

[@jordanc3233]

Omg you’re amazing. Thanks for sharing. Worked for me too on Asus Strix z790e and dominator 2 x 16gb 5600mhz. Moved ram sticks to a2/b2 and loaded XMP I. Magic!

[@silkee]

Wow. Been trying for a week to get my DDR5 working and then just came across this video. Worked first time. I did the same as a lot of people, I assumed the mobo wants it in A1/B1 but the manual says otherwise after re-reading it after this video. I bought some expensive 6400 Trident Z5 which wouldn't even post above 4600. Now it just booted straight into 6400 no problems. Thought I was going to have to return the RAM. ROG STRIX Z790-A GAMING WIFI, 14700kf

[@trancephile2412]

Thank you so much , i was using slot A1 and B1 and i couldn't use xmp profile, so when i switched to slot A2 and B2 the problem solved

[@Lego-Adventures]

You are most welcome! Thank you for the positive feedback!

[@AChillBear]

I got a similar set up to you with 13900k, same mobo and 4x16gb DDR5 sticks. For the past month I've been having crashes and figured it was the ram. Ran memtest86 on single and dual sticks without issue but failed with the sticks together. Going to give this fix a try now and see if it helps!

[@AChillBear]

It worked for me, no errors in memtest86

[@Lego-Adventures]

@@AChillBear Thank you for letting me know and happy it worked for you!

[@gingerballz9463]

Same hear removed 2 stick and it worked no problem. Put them back in works for 10 to 15 mins of game play and crashes

[@RelaxKidsbs]

@Chill Bear any crashing or BSOD while using your PC since you made the changes? I also have a 13900k with 4x16gb and have all kinds of stability issues while running XMP. I can run 2x16gb on XMP with no issues. I mainly just use my PC for gaming, streaming, and watching videos.

[@AChillBear]

@@RelaxKidsbs It worked for two weeks without crashes, then they started again. Ended up the CPU was faulty and had to RMA it.

[@420bobby69]

Gotta give you credit man, after having intermittent stability issues trying to run my 4x16gb DDR5 overclocked, it looks like changing from "sync all PMICs" to "By per PMIC" may have actually done the trick. Just got through 8.5 hours of MemTest86+ at 6000 MT/s CL30 with 0 errors after bumping VDD and VDDQ voltage by .05v and changing the PMIC setting. I'm hesitant to declare victory, I still need to do real-world tests, but initial results look super promising. Thanks.

[@VictorV2zin]

any news on that? also, do you mind to help me? my main language isnt english so i didnt understand properly what I should do

[@420bobby69]

@@VictorV2zin No memory related crashes in the past two weeks. I'd say I'm stable. It's hard to help without knowing more about your setup. RAM stability can vary a lot depending on what platform and chip you are using. For me, I enabled XMP-II in my BIOS settings, which sets the RAM to the "factory-recommended" overclock settings. After that, I slightly increased the voltage on VDD and VDDQ over the XMP settings. They recommended 1.35v, so I switched it to 1.40v. Then I changed the setting "Sync all PMICs" to "By per PMIC." This was on a Z790 Strix board (with the latest BIOS update), a 13900k, and 4x16GB DDR5-6000 CL 30.

[@brrrandamoactivo]

@@420bobby69 Did you have any errors after 3 months?

[@420bobby69]

@@brrrandamoactivo Nope. She's stable. Switching to "By per PMIC" and slightly increasing VDD and VDDQ did the trick for me. This is on a 13900k and a Z790 board, 4x16GB DDR5 at 6000MT/S CL30.

[@brrrandamoactivo]

@@420bobby69 Do you think it works for me with msi mag b650 towahawk and ryzen 7 7800x3d, the ram is going to be 2 pairs of CORSAIR VENGEANCE RGB DDR5 RAM 32Go (2x16Go) 6000MHz CL30, but Idk if the CORSAIR VENGEANCE RGB DDR5 RAM 64Go (4x16Go) 5600MHz CL36 is better or worse, taking into account that it is 1 pair of 4 and not, 2 pairs of 2. What do you think about it? I plan to order the build this week but I'm still a little confused about the ddr5 ram. thanks for your help . I just watched the video "AM5 Best Settings Optimized vs Stock vs 6000mhz" by ErockOnTech, and I think I'm going to choose the 4x16gb ram option because the mhz difference in performance is practically zero

[@hallr88]

This worked on My Asus Maximus z790 Hero. Running at full rated speed of 7600. RAM was QVL. Expected to run out of the box with XMP on the normal channels. Subbed. Thank you.

[@Nate-242]

I got the same Motherboard and I got 6600 MHz RAM. How high did you set your voltage to get everything working?

[@hallr88]

@@Nate-242 Used stock voltages.

[@krix2007]

Man you are great 👍 finally my ram is working on full speed. Thanks

[@shadowminor]

Ironic you uploaded this on nov 28th. that was the same day a bios update came out that may have helped. and there has been another one since on jan 11th. With ddr5 being so new, it is good to keep the bios up to date

[@brrrandamoactivo]

Do you think that after 10 months the problem is already resolved?

[@damir3668]

Thank you so much, Good Man, god bless you. I tried all the preset XMP/EXPO profiles on the motherboard, it didn't work for my Kingston FURY 32GB (2x16GB) 5600MHz CL36 Beast RGB EXPO AMD. I checked my slots, and naturally, i put the DIMMs into A1 and B1. 1 interesting note, that my Gigabyte Control Center didn't show any RGB config for the RAM slots, and I was wondering why it's just glowing in static color, I even almost installed the software from Kingston. But thanks god I found your videos and swapped the slots. It booted from the 1st time and shows 5600 MHz now! And guess what? The GIgabyte Control Center now shows the RGB fusion for RAM slots too! Yeeeeey! That's a win-win. Hope it won't crash when I play CS:GO. P.S. Mother Board is Gigabyte Z790 Aorus Elite AX

[@mangugaming1916]

I try everything and this what worked, thank you very much

[@Lego-Adventures]

You are welcome!

[@Naeem_Luke]

Thanks for this video , it really helped me . Asus z790 prime a with 2x16gb trident gskill ddr5 6000 ram

[@scarko_]

I still have freeze issues with Asus Prime z790-p with the same rams as you at xmp profile at 6000. Did you change anything in BIOS?

[@user-ws3nc3ih4d]

this the only video works for me thanks

[@ducrotbertrand5559]

XMD can run only with 2 ram.I have 4 ram 6400mhz Trident renegade. If you have a gigabyte z790 UD, open the utility GCC. Choose 64 in DDR and desactived XMP. Reboot the system and It's OK. The memory is stable with 4 ram. On a motherboard Asus, XMP run with 4 ram at 3600mhz (DDR4). No problem.

[@NicholasBoyerFineArt]

I’m glad I found this jsut bought some new ddr5 at 8000 and I was getting 4000 in a1 b1. I’m excited to try this I’m missing half my ram’s capabilities

[@IAMRUSTEDROOT]

Weird. Every modern PC I have built says to put in A2/B2 if using 2 sticks. Pretty sure I've done Asus boards and don't remember ever putting ram in A1/B1. I thought that perhaps changed with AM5, but the new AM5 board I just got says put in A2/B2 as well. EDIT: And now I am more confused. What Asus board do you have? I looked up the Asus Z790 and it's manual even states to put in A2/B2.

[@trendinglife592]

I have his MB, it says A2 B2, just user error, SMH

[@giorgiobellia8972]

Hi, thanks for your support. In the boot menu I don't have VDD and VDDQ but VDD2 and VDDQ. Also, I can't find the setting PMIC Voltage but many settings for sync or split voltage settings. My motherboard is Gigabyte Z790 Gaming X AX and I use 4 sticks of Kingston Fury RGB 16gb 5600hz. Can you help me? Thanks!

[@erikjarl9361]

Any solution? Have the same problem whit a Gigabyte UD AX, but whit 2 sticks. When trying whit XMP profile, it's stuck on boot. 4800mhz will only work, but the sticks is at 6000mhz.

[@giorgiobellia8972]

@@erikjarl9361 With 2 5600hz sticks I had no problems with XMP 1 (5600) profile active - Now that I have 4, I have managed, for now, to be stable with the XMP 2 profile active at 5200hz. Unfortunately, as I said, I don't know exactly what to change during boot because the entries on voltage are numerous and different from those in this video.

[@peterhanna3196]

XMP finally worked. Many thanks!

[@dayted]

thank you so much worked on my 790 Eva !

[@Kumodot]

I was using 2x32Gb Vengeance 6400 CL32 for a while perfectly using it at 6000Ghz stable. Now i finally bought other 2 blades of the same to have a total of 128Gb, and wasnt able to boot the Pc Anymore (Updated to latest Msi Bios updates before putting the blades), got it to boot to bios perfectly and showed full RAM, then after booting again, never POST anymore. I had to remove two blades physically and down the speed to 4000Ghz and have them to boot to windows. What a hell! I am gonna try watching your video now for some options.

[@Lego-Adventures]

Please let us know if it works for you or not. Also, try downgrading the BIOS to the version that worked previously.

[@scottf136]

Can't seem to find a video for MSI motherboards to fix similar problems. :(

[@rabbitmcrabbit5256]

did you find any? lemme know pls

[@scottf136]

​@@rabbitmcrabbit5256Nope. It seems very few brands and specific memory works at rated speeds with 4 sticks. I gave up. When I bought my 14900k, I settled on 2 sticks of 48GB RAM, and moved my 13900k and 4x32GB of RAM to my server and clock it at only 4000 MHz.

[@big_darkside2716]

I have „DDR5 48GB (2x 24GB) Corsair Vengeance RGB black DDR5-7000“ stick on a2+b2. After activating xmp profile windows bluescreen 😔

[@qalmed]

Wow, thank you so much it worked!!!

[@puchwat]

You are awesome thanks to you I was able to run xmp 💪

[@Lego-Adventures]

You are most welcome! Glad the video helped you,!

[@Borednerds]

In my case A2/B2 IS the default configuration for two sticks on Z690 Extreme not A1/B1. Are you sure on you board A1/B1 ? I actually looked up your board and indeed A2/B2 is default as well for you.

[@IMAJORIPAYNE]

noticed this too

[@gjurov13_20]

Great tutorial it fixed my problem

[@user-eq7tg1dp9o]

Thanks brah, dit het gehelp! Dankie man.

[@eduardomartinguillen5628]

Amigo….gracias….llevo toda la tarde intentando y volviendome loco…MUCHAS GRACIAS POR ESTE VIDEO!! ❤

[@Lego-Adventures]

Solo un placer, encantada de ayudar. :) You are most welcome!

[@michaelnunes2457]

Nice Work, you save me..... Tank You

[@akrider174]

In the z790 manual it states a2/b2 main slots so well you now in the slots they are meant for

[@dragborn926]

This did it for me

[@Khungersumit]

having same problem, withn Z790, 3 G.skills DDR5 sticks 16,32 and 16GB (slots used 12,4) not able to enable XMP. currently running at speed of 4000MHZ

[@scarko_]

Hello! I have Asus Prime z790-p and two sticks 2x16gb ddr5 g.skill 6000. I have them in the slots that you told in the video but when i enable XMP it freezes the pc at random time when i open a game. Do i need to change something else to bios to fix that? I did also the latest BIOS update for the motherboard. Thanks!

[@netfreak6993]

Does your random freeze problem solved?

[@scarko_]

@@netfreak6993 so apparently the problem it was totally another reason and not the xmp. It was the gpu. I’m using xmp now with no problems!

[@netfreak6993]

@@scarko_ which GPU you were using?

[@travisfugette4205]

@@scarko_ what was your solution? I may be having a similar issue. Which is why I'm digging through the depths of yt comment hell.

[@netfreak6993]

Asus motherboards are loosing my interest.

[@Lonewanderer30]

Is this problem across all Z790 Motherboards? I've an Asrock, and can't clock above 4400Mhz on G.Skill Ripjaws rated for 6000Mhz. XMP seems to be a no go no matter what the frequency.

[@vyruxzzgaming99]

I have the same RAM and the same issue on my z690 motherboard

[@Lonewanderer30]

@@vyruxzzgaming99 Got it fixed a couple of hours ago. Did what this video suggested and switched my two sticks from A1, B1 to A2 B2. I then updated the bios to the latest available version. The memory is now running XMP at full rated speed.

[@Lego-Adventures]

Thank you for sharing your success with this method!

[@Lonewanderer30]

@@Lego-Adventures No problem, thanks for the tip. It might work now in A1,B1 but I decide to leave it alone when it's working.😉

[@spazoid2125]

It worked thank you

[@MrSteelerod]

My mobo calls for a2 b2 configuration, does that mean i should try a1 b1? Im running g.skill flare5 6000 ddr 5 2x32 with a ryzen 9 7900x on a b650e-f. When i turn on EXPO and set it to 6000 it wont post but when i dial back to 5800 it will.

[@obluqiv5725]

I have gigabyte aorus elite AX ddr5 with gskill 6000 32gb when I installed both sticks I got 4800 after enabling xmp the PC won't boot anymore I had to reset the cmos and now only one stick of ram is working while the other one if I connect it the PC won't boot anymore please help

[@Lego-Adventures]

I've heard that the sticks above 6000 still have problems, which is why I opted for the 5600. It might state in the bios that it runs at 4800, but that seems to be a glitch, if you check in windows and with benchmarking software it will state 6000 on XMP. In which slots are the two sticks installed? A1, B1 or A2, B2 or A1, A2 etc.?

[@xOv3Rz]

Hi i have a problem with 2 stick G.Skill 2x16 GB 6000MHz z690 Apex i912900k Solution please ?...

[@peschpit]

Good Video, Thank you.

[@tigrantonoyan5063]

Please help asus prime z690 ddr5 6000 mhz but runs at 4000 should i change ram slots and try or just change voltage

[@alexhu4315]

I have an mini itx board with only 2 slots... I really hope they are gonna fix this issue soon in a bios update or something, I build my pc 3 days ago and was freaking out looking for a solution, tested cpu and gpu, even reinstalled everything(bios, drivers and even windows) thanks for the helpful video it was such a hassle and ive finally slimmed down the issue to RAM and mobo and now i have a solution, altough i wont play around with the bios and wait for everything to come out as an update!

[@nathanlambert1502]

im having problems finding the proper voltage settings on the Aorus Z790. totally different, dont have nearly as many voltage options

[@alpaci9914]

its okey thanks e lot brother

[@junioramaurypenamiliano8255]

bro thanks a lot for you advice

[@mattvanelli817]

ASRock Tiachi z690, Gskill Ripjaws DDR5-6000, i7-13700k.... No matter what I do, my ram will not run at anything other than 3000. Literally nothing works. This PC has been built, at the time of writing this, for 5 days.

[@netfreak6993]

Shame on intel side of chipset and cpu whatever they did not fix ddr5 4xdim issues even after 2 years.

[@vikingsid]

I have x670 gigabyte with 64gb 6000 Mhz... Currently my RAM speed is set to 3600Mhz (like my previous speed), I am not computer tech savvy so trying to figure how to change that?

[@gamingtube8485]

It not start up after finished?

[@bobbebusybuilding7413]

Hello! I haven't tried xmp yet but I have the exact same motherboard and similar ram. Did you have to update the bios for it to work?

[@Lego-Adventures]

I did update the BIOS, but it should work even without the BIOS update. If none of the solutions in the video work, try the BIOS update.

[@bobbebusybuilding7413]

@Lego how many bios updates did you have to do? also does it run at 4800mhz with no xmp?

[@Lego-Adventures]

@@bobbebusybuilding7413 Only one update, currently running version 0602. Yes, it is usually possible to run 4800 with no XMP by manually tweaking the settings, but it's more complex than just activating XMP.

[@tuncaycalan1125]

Should it be By Per PMIC with 2 sticks also?? Answer me pls!! Cant enable xmp pc crash..

[@Lego-Adventures]

Good day. I am not sure I understand your question, but yes if you use only 2 sticks as well, you still need to have it in the correct slots. If not, try one stick at a time, it might be that one or both of your sticks are bad.

[@DD-es6qd]

A1B1 won’t work for me system will not even boot y Up and I get a ram error on the motherboard

[@coolsvile]

switching slots worked for xmp, z790 prime gskill 6000

[@maximedml7418]

I can't find the by per PMICs option, i have Asus B650 prime plus. Help me !

[@dr.hannibal8338]

I think that’s for Intel CPUs only? Idk i have 7900x3d x670e and can’t find it either

[@maximedml7418]

@@dr.hannibal8338 if its the case its sad

[@oSyphr]

I had 2 sticks had issue at 6400mhz or xmp on had fixed it but switched 2 4 sticks now having the same issue but cant get it unless its under 6200mhz but i paid for 6400mhz so i need full potential

[@mylesc3053]

I have an asus tuf b650 board and my ram is in slots a2 b2 yet my ram is stuck at 4800mhz (rated for 6400) and my D.O.C.P (amd version of x.m.p) is on. Can anyone help?

[@genehsis]

will this apply to expo also?

[@arturguidugli2849]

Like, like, like... ty!

[@Lyoishi]

Interesting, my asus 690 G specifically says to use A2:B2 first

[@kil4]

Funny thing in new manual from asus its A2 B2 :)

[@Koyamine]

Why is this a thing? But thanks switching the slots worked for me too (i5 13600k, Gigabyte Z790 Gaming AX, Kingston Fury RGB 6000MT)

[@giorgiobellia8972]

Hi, I have the Gigabyte Z790 Gaming X AX motherboard and i use 4 sticks of Kingston Fury rgb 5600hz 16gbx 4. When i use XMP the system is instable and sometimes the PC don't start. In the boot menu i have the voice VDD2 and VDDQ for the voltage and there isn't SYNC ALL but many settings for sync or split the voltage. Do you have any idea how to set these settings correctly to use XMP? Many thanks for you support!

[@Koyamine]

@@giorgiobellia8972 using all 4 memory slots is very unstable for ddr5 i highly recommand getting 2 lager modules. But you can try to update ur Mainboard driver with Gigabytes GCC tool, be aware of 3 party software

[@giorgiobellia8972]

@@Koyamine Thanks for the reply. The drivers are already all updated. In any case, not knowing how to set the voltage parameters, I tried to enable the XMP 2 profile at 5200hz and with 4 sticks it seems stable.

[@jeeroylenkins3081]

I'm just leaving XMP off. Too much fuss...

[@mihirpatel5024]

What about 1 stick of 16GB 5200?

[@Lego-Adventures]

That should work without any issues or tweaks to BIOS. Do you experience crashes or no boot?

[@mihirpatel5024]

@@Lego-Adventures no boot, it shows American Megatrends error

[@Lego-Adventures]

@@mihirpatel5024 What RAM are you using? What is the RAM rated speed on the box, 5200? Do you have X.M.P activated or not?

[@talalsafaq]

thank you

[@Lego-Adventures]

You are most welcome.

[@Sami783]

Great 👍

[@iamboxboxman596]

Hahahaha this is so dumb, i’ve been messing with these settings in the bios for so long to learn this. Thank you tons

[@CurvedSlightly]

Also see if your RAM and speed is supported by your MOBO, my Z790-A Prime will only go to 6400mHz with the CORSAIR Vengence Sticks @ 32gb (2x16gb)

[@alexsp7086]

Did you even read the manual mate :)) your not even meant to put the ram where you first put it. It even states on the ASUS board for two modules you put it in a2 and b2 not a1 and b1. Just saying. Not being rude

[@Lego-Adventures]

Glad to hear your manual is correct, but the main reason I made this video is because my manual states the exact opposite...and yes, I ALWAYS read the manual first, even if just buy a kettle. ;)

[@alexsp7086]

Ah ok good to hear hope all is working good.

[@SynisterNation]

watches another youtube video, reproduces exactly saying the same thing, acts like HE fixed it :P 🤣🤡

[@skunkvakt1007]

i have Gskill 7600Mhz and i can only run them at 6000(A2,B2), asus Z790 prime-A

[@Lego-Adventures]

@kaiarbenhansen1617 - Thank you for your comment, I am happy that my video helped you; however, I had to remove your comment since it is blasphemous. Only One Being deserves the title Saviour and that is Yeshua (Jesus) our Saviour that died to wash away our sins with His blood and rose again so that we can one day have eternal life. May this Truth set you free.

[@ChrisRamirez-tx3cx]

😅

[@SlapGodKenTV]

Need help !

[@SlapGodKenTV]

Mine still keeps crashing !😊

[@Nemesis_790]

Do u solve the problem ?

[@SlapGodKenTV]

@@Nemesis_790 somewhat changed timings and reseatin ram