No video

How To Spot Weld Using Gasless Welding | Flux Core Welding Tips And Tricks

  Рет қаралды 51,390

NightWrencher

NightWrencher

Күн бұрын

Today we are going through some more gasless welding tips and tricks using flux core wire and looking at 4 ways you can spot weld thin sheet metal. Each one takes its own amount of practice but over all the methods are fairly simple. So sit down, follow along with me and enjoy the show!
#gaslesswelding #welding #spotweld

Пікірлер: 52
@baldeagle1447
@baldeagle1447 2 жыл бұрын
You’ve delivered a LOT of teaching very casually in such a brief welding video , Thank You.
@NightWrencher
@NightWrencher 2 жыл бұрын
Thank you! I hope it really helps!
@apatterson8128
@apatterson8128 2 жыл бұрын
Your flux core welding videos are awesome. Many beginners such as myself start with flux core because we can use the machine right out of the box. It's great for a hobbyist or DIYer. Thank you for your time, NightWrencher.
@NightWrencher
@NightWrencher 2 жыл бұрын
Exactly right, thank you!
@personanongrata4419
@personanongrata4419 2 жыл бұрын
Thanks for these videos. There’s not a ton of FC content so yours is welcome to this beginner.
@NightWrencher
@NightWrencher 2 жыл бұрын
Much appreciated! Theres more to come, keep an eye out!
@BillAdams-y6w
@BillAdams-y6w Ай бұрын
Great video straight to the point,i have learned so much in so little time,you are the best thank you sir
@treadandtracks
@treadandtracks 2 жыл бұрын
Awesome vid and tips thanks! I'm going to have to spot weld new floor pans in my f body. This will help.
@NightWrencher
@NightWrencher 2 жыл бұрын
Hope it helps! I've got a new video on sheet metal if you havnt seen it!
@mrb2843
@mrb2843 2 жыл бұрын
I bought a gasless machine recently as I plan to weld 3/4 inch 14sgw square tube this weekend to build a frame for a table to sit my cnc. Great info, thanks.
@NightWrencher
@NightWrencher 2 жыл бұрын
That should be a piece of cake 👌
@MikeCraigSLP
@MikeCraigSLP 2 жыл бұрын
Thanks for all the videos. I've been learning to hobby weld. Started with smaw and just bought a flux core machine. Your videos have been great!
@NightWrencher
@NightWrencher 2 жыл бұрын
Thank you! There will be more to come!
@stephk5255
@stephk5255 27 күн бұрын
Great info! Thank you!
@NightWrencher
@NightWrencher 26 күн бұрын
I appreciate it! Thank you!
@aros007z
@aros007z 2 жыл бұрын
Awesome instructional video, thanks!
@NightWrencher
@NightWrencher 2 жыл бұрын
Thank you! Hope it helps!
@mehere3013
@mehere3013 21 күн бұрын
this is informative for me since im going to.weld 2 spot welds
@ROGUESQUADGARAGE
@ROGUESQUADGARAGE 2 жыл бұрын
Thanks for the video, you break it down well
@NightWrencher
@NightWrencher 2 жыл бұрын
Thank you! I really appreciate it!
@lionelmoodley3238
@lionelmoodley3238 Жыл бұрын
Thank you for the great video. Its been very helpful especially for hobbyists who cannot easily access shielding gas. Will practice before starting on my project.
@KP11520
@KP11520 Ай бұрын
Your show and tell was the most effective I've seen... And very simple to digest. So Good, I'm going to suggest you do day work as well! LOL I have to replace an upper Radiator Support in my old maxima (accident) I just have to figure out which side to drill out the spot welds superficially so I can use the metal in the support as the base you weld to and build up. Or is it easier to drill both through?
@neburion102978
@neburion102978 2 жыл бұрын
Im goin to spot weld my 240z floors tomorrow this is goin to help ... thanks for the tips
@NightWrencher
@NightWrencher 2 жыл бұрын
Good luck man! I have a new video on welding sheet metal too if you need mote help
@robertclymer6948
@robertclymer6948 Жыл бұрын
Love your training videos NightWrencher! You make it easy to understand. Thank you!!!
@rogerdodger5415
@rogerdodger5415 10 ай бұрын
You are awesome Bruh. I’m still very much a newbie at welding… and this was super helpful. 🙏🙏🙏🙏 ✌️✌️✌️✌️
@daiiahi3403
@daiiahi3403 Жыл бұрын
Good video....always had an issue with welding sheet metal....will try the technique soon to patch a metal wheel barrow that has some rust holes.
@NightWrencher
@NightWrencher Жыл бұрын
Thank you! I hope it helped!
@daiiahi3403
@daiiahi3403 Жыл бұрын
@@NightWrencher NO!...Thank You!...it will definitely help!
@JOEZEP54
@JOEZEP54 2 жыл бұрын
Nice presentation. 👍 # 27 Stay safe, Joe Z
@NightWrencher
@NightWrencher 2 жыл бұрын
Thanks man 👍
@JOEZEP54
@JOEZEP54 2 жыл бұрын
@@NightWrencher You're welcome.
@Colonelcheeser
@Colonelcheeser 2 ай бұрын
That must be some magical sheet metal because I turn my welder to the lowest settings and as soon as I touch the side of the sheet metal with the welding tip, it instantly burns through
@richardjohnson2913
@richardjohnson2913 Жыл бұрын
Another highly informative video, awesome! 👍👍👍
@smokevault
@smokevault 2 жыл бұрын
Great vids! Dodge truck bed quarter panels, do you recommend the flange type tool (CENTRAL PNEUMATIC Air Punch/Flange Tool) to prep for lap weld to get a better finish instead of just putting it behind original panel? So much controversy out there between lap and butt welds. I just started welding just to fix these body panels and want my best shot at a nice finish. Thanks!
@NightWrencher
@NightWrencher 2 жыл бұрын
Hey man, I have the same tool, works really well for thin gauge sheet metal but anything thicker than 20ga and it struggles to put a bend in it. For body work its really a toss up between the 2 processes. The issue is that you dont have access to the back of the panel where dirt and debris get trapped with a lap weld. The issue with a butt weld is that the area becomes a hard spot and shaping a welded bead becomes difficult. Ive had the easiest time with lap welds personally. Whether its a flanged lap weld or just a piece of sheet metal held from behind, never had an issue.
@johnscrivy
@johnscrivy 2 жыл бұрын
Good video
@NightWrencher
@NightWrencher 2 жыл бұрын
Thank you sir!
@bryancose3753
@bryancose3753 2 жыл бұрын
Great videos, simple to understand. May I ask what guage wire are you using? I am a beginner welder and its difficult to not burn through. I was using .030, then went to .035 and I am gonna try .045 next. When welding body panels we have no heat sink behind it like your table. Settings are all the way down and I try to move quickly. Thanks Night Wrencher
@NightWrencher
@NightWrencher 2 жыл бұрын
For sheet metal, the thinner wire is best because it takes less heat to get it to start flow. Body panels usually need to be tacked in place in a criss cross pattern to prevent warping. You dont need to run beads across sheet metal. Just keep going around the panel and adjust the gaps as nessesary until its welded all the way around
@summoner9924
@summoner9924 Жыл бұрын
okay.... this guy means well, butclearly isnt a pro(in the video i mean, his reply here is pretty good). thin metal, needs a thinner wire, ypure going in a hotter and larger weld puddle direction, by increasing wire diameter. try 0.023 or something under .030 size, itll work better than the 35 or 45. get the thickest piece of steel ypu can find/buy, half inch plate if possible, as a table/heat sink, the heatsink realllllly helps. you probably wont be able to do continuous welds, bit a couple seconds spot/ plug weld shoulpd work. get a wire brush and clean the area before ypu weld, for each 'stitch' down the joint ypure welding this way, it must be CLEAN, no paint, rust, sometimes even mill scale (the grey/black coating over the bare steel. thats oxidation, and contaminates the weld, and makes it spatter much more. lookup 'weldingtipsandtricks.com' that guy is a professional of decades of experience. get some nice 1/4" stuff to start learning on aheet metal is very unforgiving, it burns theough before a beginner can react really. good luck mate i love welding and hope it works out for you!
@MrStand4Christ1
@MrStand4Christ1 2 ай бұрын
He da goat...
@meca13b
@meca13b Жыл бұрын
Good work ! What welder did you use ? Liked and subbed ✔️
@cJhudanich
@cJhudanich 2 жыл бұрын
Wondering what wire speed your set at?
@NightWrencher
@NightWrencher 2 жыл бұрын
You want to back off as much as you can without it interfering with the weld. On my machine it was about 95ipm.
@elmarvlog4624
@elmarvlog4624 2 жыл бұрын
Friend please help thank you
@NightWrencher
@NightWrencher 2 жыл бұрын
With what?
@1839365
@1839365 Жыл бұрын
Great info thank you, but what is it about Americans and the phrase "we're gonna go ahead and...". It's like a weird habit!
@NightWrencher
@NightWrencher Жыл бұрын
Its not a habbit, I'll break it down for you. "We're"- you(the viewer) and I "gonna go and..."- going to continue to the next task which is... etc. If the word is the complaint of the word gonna. Its no different from using the words "innit" from british english, "amos" in spanish, "ничё" in russian, etc.
@MrBoomtheroom
@MrBoomtheroom Жыл бұрын
what is the best approach for welding small things ie.. something like this kzbin.info/www/bejne/eYm7m3mtbsybeqc
@shanemack06
@shanemack06 7 ай бұрын
great video. no shitty, condenscending attitude. just the facts.
@NightWrencher
@NightWrencher 7 ай бұрын
I appreciate it bud 👍
Gasless Flux Core for Beginners #1 BIG Thing
11:36
weldingtipsandtricks
Рет қаралды 1,2 МЛН
Son ❤️ #shorts by Leisi Show
00:41
Leisi Show
Рет қаралды 10 МЛН
managed to catch #tiktok
00:16
Анастасия Тарасова
Рет қаралды 40 МЛН
Harley Quinn's plan for revenge!!!#Harley Quinn #joker
00:49
Harley Quinn with the Joker
Рет қаралды 33 МЛН
ПОМОГЛА НАЗЫВАЕТСЯ😂
00:20
Chapitosiki
Рет қаралды 28 МЛН
How to Plug Weld Auto Body Sheet Metal & Prevent Pinch Weld Rust
7:21
Lakeside Autobody
Рет қаралды 159 М.
Flux Core Welding Tips | Get Better Looking Flux Core Welds
12:27
Garage Hobbyist
Рет қаралды 32 М.
TOP 5 Mistakes When Flux Core Welding With LRN2DIY
11:49
DIY PRO
Рет қаралды 62 М.
Gasless Flux Core welding. Beginner Tips
11:14
Chiasson Smoke
Рет қаралды 8 М.
FluxCore Thin Metal without Blow Through - Updated
7:19
General Air Service and Supply
Рет қаралды 84 М.
Busting Fake Internet Welds
10:06
The Fabrication Series
Рет қаралды 8 МЛН
#1 Mistake Made When Flux Core Welding (one simple Trick)
12:02
Son ❤️ #shorts by Leisi Show
00:41
Leisi Show
Рет қаралды 10 МЛН