How to stop condensation by installing Windows Insulation Kit (Window shutters friendly)?

In this #DIYable video, I am going to show you how to get rid of water condensation, reduce draft and increate R-value in multiple ways. The most common way is to install the windows insulation kit, however many people are struggling with the installation and can't get the film perfectly or wrinkle free because they chose the wrong product. For DIY people, any kit in the rectangular box is not good, regardless of brand such as 3M Window Film Insulation.
I will show you step by step how to install the #MDBuildingProducts Shrink and Seal #WS31520 windows insulation kit. I am going to share a lot of DIY tips with you. For people who have windows shutters and can't figure out how to install the film, you need to watch this. Finally, I will show you another project of mine using Acrylic panel to do the insulation instead of using the plastic film.
Related video:
- 10 DIY Rules the Pros won't tell you how to tint Model 3:
• Don't tint your Tesla ...
Disclaimer: This video is NOT sponsored, I am not affiliated with any of the products shown in the video. I just want to help you all DIY people from the bottom of my heart.

[@moh9133]

Would shrink wrapping the removable wooden frame work better? Best of both worlds 😂 & the dehumidifier sachet things secured to the frame, so you don’t see them or any condensation

[@Eyes_Open]

Good tips. Thanks.

[@DIYable]

Glad it was helpful!

[@spitlim]

Subscribed! Thoroughly enjoyed your commentaries ... "...use the middle finger..." 😂 Really appreciate your tips and it shows your experience. Ozzie homes are darn drafty due to poor insulation standards! My old house has wooden single-pane window frames and cold drafts aplenty. To change the wooden frames to aluminum double glaze will cost an arm and leg. I'm going to give it try...now to find the roll-type shrink film.

[@tashaadolph677]

It's minus 30 tonight overnight. Manitoba lol

[@grandmaraps]

And to think I've been using the wrong finger all this time 😆

[@DIYable]

Yeah.. middle finger is the best LOL LOL

[@nickice7009]

Yes amazing 🤩 😊Did this today used your video and your tip about having everything as even and tight as possible not relying on the hairdryer to resolve everything like gravity do the work first make it tight than the hairdryer made it come out so good you can’t even see it all in front of the window the plastic freaking amazing. Thank you.

[@kino_cinante]

You could add a few desiccant bags to really stop the condensation.

[@DIYable]

Definitely. I thought about putting some desiccant bags between the film and window. However, without installing the windows insulation film, the desiccant bags alone may not be very effective.

[@JW-xx4cu]

Great and helpful video! Do you leave the moulding frame as a permanent fixture in your window frame after the winter season is over?

[@cindyp9843]

Not sure why didn’t have more thumbs up. Thank you the tips and laughs.

[@REMXBODYART]

really good videos sir 👌

[@sethburkhart1021]

I don’t recognize your accent. And where is it -20 degrees Celsius? Yikes!