How To Store Regulators |

  Рет қаралды 10,606

Scuba Diver Magazine

Scuba Diver Magazine

Күн бұрын

Пікірлер: 22
@toadou8127
@toadou8127 Жыл бұрын
I wrap a neoprene 2nd stage cover, fitted with a water bottle cap, sandwiched between purge button and cover, to save seat on valve.
@mateusnascimento3779
@mateusnascimento3779 Жыл бұрын
thanks so much for answer my questions ! it helps a lot
@Debelius-13
@Debelius-13 3 ай бұрын
We dive all over the year ( Mauritius ) , do you recommend an anti bacterial treatment ?
@ScubaDiverMagazine
@ScubaDiverMagazine 3 ай бұрын
I wouldn't worry too much, maybe once a season before storage. Regular dish soap should be good enough for day to day cleaning.
@Matthew-uv7bt
@Matthew-uv7bt Жыл бұрын
I recently saw a "Save-a-dive" o-ring kit. Do you have any advise on what sort of non expert tools/items like this (if you should get something like this) for someone that has started to invest in their own gear? It seems like a smart item to have on hand.
@ScubaDiverMagazine
@ScubaDiverMagazine Жыл бұрын
I usually keep a small adjustable spanner and an Allen key that fits the port plugs on my 1st stage. Sometimes it's handy to move hoses and replace those O-Rings. That's about all you need to a regulator. Anything else and you need to know what you're doing...
@kyleknickerbocker8650
@kyleknickerbocker8650 Жыл бұрын
#askmark I'm moving from the west coast of the US to Florida. I currently dive a 7mm wetsuit with hood and gloves. I am being told a 3mm will cover most of my needs now. What would be a good cost effective exposure protection to look into?
@nigelw.9043
@nigelw.9043 Жыл бұрын
A similar video on how to store the BCD would be great #ASKMARK
@amadeuss3341
@amadeuss3341 Жыл бұрын
Never wash Atomic without tank connected. The storage feature that Mark explained will let the water in. I purchased a small 13cu/ft tank for that purpose.
@Yycl6625
@Yycl6625 Жыл бұрын
thanks for the storting tips. I have a question would like to ask #askMark, can you explain how does the pre-dive and dive switch on the 2nd stage regulator actually works please? many thanks
@ScubaDiverMagazine
@ScubaDiverMagazine Жыл бұрын
A pre-dive lever will usually connect to a shroud inside the 2nd stage that redirects the airflow so that it points towards the front of the 2nd stage instead of the mouthpiece. This airflow pushes the diaphragm forward to help close the valve between breaths. I'll show what I'm talking about in a few weeks
@Yycl6625
@Yycl6625 Жыл бұрын
@@ScubaDiverMagazine thank you very much, looking forward to your video.
@martasanjuan6658
@martasanjuan6658 3 ай бұрын
Just take it to the shop and pay the services 🤣
@fatphoca5009
@fatphoca5009 Жыл бұрын
Can you not submerge and soak a yoke style regulator when it is depressurised in fresh water after a salt water dive trip?
@ScubaDiverMagazine
@ScubaDiverMagazine Жыл бұрын
You can but you need to be sure that water can't find its way inside the 1st stage. Dust caps aren't always enough to keep water out. The best way is to pressurise them on a cylinder, if a cylinder isn't available then I hold my thumb over the inlet but don't let the 1st stage soak.
@fatphoca5009
@fatphoca5009 Жыл бұрын
Thanks for the advice. It was always normal practice for us to soak the whole regulator set in freshwater at the end of a dive trip, as the set might not be used for weeks and months after. I was not aware that water had a chance of getting into the 1st stage. Now I will be more careful but surely it can't be difficult to invent a cap with an O ring that can be used (at least with a yoke style reg) for this purpose?@@ScubaDiverMagazine
@ScubaDiverMagazine
@ScubaDiverMagazine Жыл бұрын
Some are water-tight _ but not all_ so I need to be careful with recommendations... If water seeps inside your 1st stage or hoses it can corrode unseen and cause failures. As long as it gets a good flush of fresh water your 1st stage is pretty good. Give it a once over with an old toothbrush but, it doesn't need a proper soak as much as your 2nd stages do.
@hershshah9215
@hershshah9215 Жыл бұрын
Pro tip: you don’t need to wait for the next dive season if every season is dive season! 😎😁
@sagestuart6169
@sagestuart6169 Жыл бұрын
#askmark what are some of the best accessories for scuba diving? (like heated insoles for drysuit diving)
@ScubaDiverMagazine
@ScubaDiverMagazine Жыл бұрын
Dry bags, always useful. A hat for the surface in both hot and cold climates. More than one hood if you're diving more than once in cold water. I think I have a Top10 video coming out soon for general diving accessories
@carlmills400
@carlmills400 Жыл бұрын
Time to dust off the bz200 and heated vest and keep diving.
@josephdracula7487
@josephdracula7487 Жыл бұрын
👍😎🤿
How Pre-Dive Switches Work | #scuba #regulator | @ScubaDiverMagazine
6:55
Scuba Diver Magazine
Рет қаралды 14 М.
What Gear Should A Travelling Diver Bring?
12:20
Simply Scuba
Рет қаралды 70 М.
1 сквиш тебе или 2 другому? 😌 #шортс #виола
00:36
Крутой фокус + секрет! #shorts
00:10
Роман Magic
Рет қаралды 41 МЛН
VAMPIRE DESTROYED GIRL???? 😱
00:56
INO
Рет қаралды 7 МЛН
She's very CREATIVE💡💦 #camping #survival #bushcraft #outdoors #lifehack
00:26
How to tie a boltsnap
18:07
InnerSpace Explorers - ISE
Рет қаралды 276 М.
Cleaning My Regulators {[Keeping It Simple]}
10:35
LakeHickoryScuba
Рет қаралды 41 М.
5 Ways To Use Less Gas When Scuba Diving
11:30
Divers Ready
Рет қаралды 227 М.
How do SCUBA regulators work? | SCUBA 101
8:00
BlueWorld_plus
Рет қаралды 30 М.
The Scuba Diving Regulator: First Stage Basics
11:01
Divers Ready
Рет қаралды 34 М.
Storing Your Regulators | Deep Dive
7:55
Simply Scuba
Рет қаралды 9 М.
SCUBA Regulators Decoded: What You Must Know Before Buying
11:38
Greatdivers SCUBA
Рет қаралды 2,2 М.
Why Put a Transmitter on a Short Hose? #askmark #scuba
8:42
Scuba Diver Magazine
Рет қаралды 7 М.
Scuba Regulators: Piston V Diaphragm
8:13
Divers Ready
Рет қаралды 27 М.
1 сквиш тебе или 2 другому? 😌 #шортс #виола
00:36