HOW TO Strap Amps - Linking Two Strappable Mono Amps!!!

[@chadjay828]

This video was perfect the way you explained it any beginner or dummy like myself could understand it and do it without paying hundreds of dollars to a sound shop SO THANKS ALOT !!!

[@winkis1234]

Awesome video bro very informative. Got my second skar 4500 on it’s way and another sundown x15v3! This one’s going to be that powerhouse!

[@frankrivera9083]

That was a great video brotha u took the time to show everyone step by step without rushing everything good shiznit my dude (✌🏼💪🏼🔈💪🏼🔉💪🏼🔊)

[@joelucio2367]

1:40 everyone asking what to do without the switch he just gave a perfect example of that senerio without the switchs on the audiopipe amps in the video

[@casperskafs]

I miss all your builds man. I got to hear the Never Satisfied Chrysler 3000 years ago at a Jeremy Webber Show and man it was awesome. Damn that was prolly 5 years ago or so

[@BlaserBuilds]

casperskafs Yeah it seems like forever ago. lol. We must be getting old ha.

[@psementalist]

Excellent video brother keep them coming . So much more knowledge about car audio of how to properly hook up the equipment. Two thumbs up in the air for you brother keep up the great work making awesome KZbin videos

[@BlaserBuilds]

PSE Mentalist Thanks Garrick.

[@milanjevtic1424]

@@BlaserBuilds 15;yfde

[@milanjevtic1424]

15o62

[@quintonwilliams8586]

Strapping/bridging 2 mono amps combines them to make it as if you have 1 bigger amp. The master amp will have the main rca from headunit going to the inputs and the bridge out from the master goes to the bridge in on the slave. You must have matching brand model and wattage amps for it to work. So if you have 2 1500rms mono amps and you combine them then your subs will be getting 3000rms going to them. But of course you must have proper electrical and fusing along with reserve battery and a H/O alt. The rms doesn't be constant either depending on your volume and proper settings on the master amp. You don't need to adjust gains or other settings on slave amp thats what the master amp does.

[@chadjay828]

Oh shit that is nice to know! So if I have a scar RP 800.1 I cannot strap it to a scar RP 350.1?? That sucks I have a scar EVL sub that takes 1000 W RMS I was hoping by strapping them two together I would get or make up for the extra 200 RMS the 800 is lacking

[@jonroberts6518]

I just came across this video, to understand this better if you have two 1500 w rms amp. To have 3000 watts rms. What of final impedance 1 / 2 ohms. How are gaining more under 2ohms? If there 1500 each @ 1ohm and are even less at 2ohm each, to its watt power

[@JamesZ-py1xl]

So I can't strap a 1500w amp to a 700w amp? And make 2200w?

[@quintonwilliams8586]

@@JamesZ-py1xl no you only strap if you have 2 of the same exact amps that can be strapped

[@quintonwilliams8586]

@@JamesZ-py1xl i have 2 CAB 2000.1 amps i strapped them and was doing anywhere between 3800 to 4100 watts on 2 DD 12s in a 6th order enclosure.

[@Hayawasa]

I know this is an old video, but to anybody wondering, the purpose of this is to get the same amount of power with less current draw. The only downfall is just like bridging a multichannel amp, the ohms raise up double when strapped.

[@Jason_Voorhees.]

bout to strap 2 apcle @1ohm lol wish me luck 😂

[@kamrenmy7007]

The purpose is to get more power, the power for a given impedance normally should double, but your minimum impedance normally doubles as well.

[@Hayawasa]

@@kamrenmy7007 generally you dont get any more power vs two amps not strapped, strapping them only unifies the output sections to act as a single channel with the benefit of less current draw .given impedances can be manipulated in a multiple dvc subwoofer setup. Im not saying that your thoughts are incorrect, it could be one reason that somone would do this, im just saying that its alot more common for people to do this to help reduce electrical strain and not have to spend so much more on the charging and capacity vs just wiring different

[@downhilldaddy5282]

@@Hayawasa 🤔

[@anthonyfejeran1891]

thanks for clearing that up for me. Very straight forward tutorial.

[@rickylanding8379]

Is it? Cause how do you hook one positive n one negative to two subs? Especially if theyre 4 ohm n your trying to push em to 2. Not happening ever like this.

[@joshuafreeman6720]

Sorry if I missed him explain it but, if your strapping 1ohm stable amps together then your new stable ohm becomes 2ohm so do not wire final ohm lower then 2.

[@rodneyhendricks2412]

Same here I’m asking I still want my 1 ohm load.

[@anthonyabner5753]

I had that problem myself and I had to get dual 4 ohm voice coil so it would come up to 2 ohm on 4 12’s

[@anthonygary6246]

Do you have to change the ohm load on the subs?

[@samdudevery7695]

@@anthonyabner5753 you can do 2 ohm with 2 dual 4 ohm subs

[@wilsonrawlin8547]

Correct. The APMN2000 Amps I have will do 4K strapped at 2ohms.

[@anthonysalguero8245]

Perfect description step by step I like that 😎💪🏼

[@austin924]

That's perfect, cause I'm strapping those same amps, just the newer version.👌👌👌👏👏👏👏👏

[@sammachado2990]

Sameee

[@BrandinoTheGod]

Super helpful video! Im curious tho, why not bridge the speaker wires pos and neg like normal? Meaning why does it switch polarity on the slave?

[@thethoughtfield]

Great iformation. Though i've a doubt, how do you set the gains and xovers? do you have any offset problems if one gain is higher? Thanks

[@joshuafreeman6720]

When amps are strapped the master controls are the only ones that work. If your amps have a slave/master switch then when you set the slave to slave it turns off the setting, and ones that don't have switches just auto detect your master.

[@chadjay828]

@@joshuafreeman6720 thanks are all mono amps strap a bowl? I mean like a class D amplifiers

[@Jason_Voorhees.]

​@@chadjay828 no

[@hadbl12]

What is the benefit/ pros and cons of the slave method versus just running two separate amps???

[@justinc9911]

You can get lower independance "Ohms" example strap two monoblocks 1ohm and u could do 0.5ohm stable

[@Neal-Educated-By-YouTube]

Thanks one more time bro I was Really thinking I was doing like you showed me the first great time lol. So yea bro ya got my blood flowing again and love in it !

[@Brebear6971]

Is this the same as bridge amps running 2 separate subs

[@logiticalresponse9574]

Were u able to fry that speaker ? It sure lookt like it was moving more than ever has (😅

[@jamesburdick428]

Do u connect the ground to ground even if running four subs with dual voice coils that is wired down to 1 ohm

[@vicflo0791]

That's what the hell I wanna know lol

[@realreviews5693]

I have to mono amps like you showed in the video. But mine have 2 pair of speaker leads per amp. Do can i just wire it the same way you did or can it/does it have to be done a different way? Great video by the way. Perfectly explained

[@78758nate]

It can be wired the same way. Dual speaker leads just makes it easier to wire up more speaker wires than single leads

[@chadjay828]

At 35 seconds sounds like whoever is behind the camera tried letting a FART RIP SILENTLY but the cameras sound picked it up LMFAO 🤣😂🤣😂🤣🤣

[@deandreburnett4587]

😂😂😂😂😂

[@richardwarren3183]

Outstanding, thanks bro, this helped so much.. I do want to know, since I'm a novice at this an just learning., Would this be the same to power my door speakers, without crossovers? Or would I need them. I would love to se a video on how that's done.. thanks

[@BlaserBuilds]

Usually door speakers amps would not be strapped, and you'd use a 4 channel amp or something to keep left/right/front/rear adjustability.

[@everettnordquist2773]

Good vid with Amp do you hook power and ground

[@ghettoboylaygo8067]

Will two amps on the same sub make it hit harder ??

[@MichaelBWare]

Nice and simple. Good demonstration video.

[@j.d.evansiiievansiii1832]

Awesome video.. was that a bass test sample you were playing or humming?

[@gilbertmendez9881]

Holy shit what speaker are you using for this demo, it definitely took all that power like a Champ, I'll be buying a set for sure!!!

[@Tom-wq2mz]

Positive on the slave goes to negative on the woofer. Can you please explain how that works. And what is the purpose of Strapping together. I've got two 1500 watt amplifiers I'm thinking about Strapping. Both amplifiers are the same and have rca's to Strap together. Thank you

[@adrianhinojosa4108]

Negative on the woofer how the fuck

[@frederickbehn5610]

This was awesome, i had no idea that was possible. Can this be done with any same match Class D Mono block amps?

[@jaystuder3989]

No it has to be a strappable amp.

[@Craneop817]

Thanks for the video. I’m strapping two amps but each amp has two positives and two negatives for subwoofer output. I have linked the two negatives from each amp together. I am only using 1 positive from master and 1 positive from slave running to my sub. This leaves 1 positive on the master amp and another positive on the slave amp. Can you tell me where to connect my oscilloscope leads when adjusting the gain please?

[@BlaserBuilds]

Positive on master should be positive. Positive on slave should be negative.

[@SprouseyTheHandyMan]

Earned a subscriber thank you for the help

[@Bassmore532]

Did you need a fuse to connect them?

[@chadgriffin5438]

Very helpful am strapping the audiopipe amps just like those. However i will be running two 12" subs. Im assuming that i run the speaker wires the same just add the other sub? Looks like thats only going to allow a 2ohm load, am i thinking correctly? Any advice? Just curious if you know a way to get it down to 1ohm? Thanks again for the video and hopefully i wont fry all my new stuff.

[@bumpylump9236]

1 plus 1 equals 2. 2 ohm is lowest you can run and be safe.

[@chadgriffin5438]

@@bumpylump9236 were bumping like pretty unbelievably for two 12s. If Skar can get their few kinks worked out they will have one heck of a product. Actually took the two out because was close to 200lbs added weight with both subs and the box. So running one 12 at the moment. Buddy has an Escalade with two Kicker comp 15s. He just turned his off and went inside. He was kinda butt hurt honestly that the one 12 dusted him. Thanks for the replyan and keep on with the videos.

[@junioraguil7565]

Do they have to be the same brand amp??? 😬

[@MrSqueegey]

still learning this car audio stuff thanks, was wandering what was meant by strapped.

[@BlaserBuilds]

m.r. squeegey You're welcome. I'll be uploading a new one soon on daisy chaining and splitting too.

[@polosavage1]

Can you strap a mono amp to a stereo amp or vice versa, what if they don't have a RCA Port that says Bridge. And does this combine their rms power?? And does it change the ohm ratings??

[@musraniaa7093]

My question 1.Why speaker wire +to+ 2.whare the bass knob want to connection master amp or sleve amp.? 3.how to adjust gain setting ?sleeve amp gain all zero down and than adjust the master amp only.? Thank

[@davidgoding5636]

Great video bud i just have a couple questions...... I just bought 2 Planet Audio pl4000 what amps.... the owner manual it's telling me when I strap them that the slave amp doesn't get no RCA's put into it.... the manual says the master amp gets the RCA's in the input to the head unit... and the remote wire on the slave amp has to go into the head unit I was just wondering if I could do it this way also..... and it is also saying I should get two separate ground wires could I do that also instead of running one wire to both terminals...... sorry for all the questions I am kind of new at this and want to make sure I do it right

[@BlaserBuilds]

The amps should have their own power and ground. Run a larger cable front to back then use a distribution block. The slave amp needs some type of signal. Usually it gets an RCA from an output on the master.

[@treiber671988]

So this will work only of all four woofers have an impedance of 2 ohms?

[@montyfrelgus6312]

This would b a 1ohm final impedance?

[@eddiereichel9354]

See in order to strap the amp what you want to do is on the slave amp swap the battery + and - wires and run the battery to - and the ground to +

[@AngelChavez-fz5nk]

Hey i have a qustion ?. Well i have two monoblocks amps how do i do my wiring from two dual 4 coil into the monoblocks amplifier.

[@trentdawg2832]

What is the reason for doing your amps this way, what would be the benefit, couldn't you run the rca's out of amp 1 to the rca Inputs on amp 2 and just run them that way??.......I'm sorry if this question doesn't make sense I'm a little green when it comes to sophisticated audio....I can hook up standard amp and stereo but that's about it....

[@kingchrisp198432]

When you strap two amps together does it change the ohms load?

[@rickylanding8379]

It depends how you hook the subs up that changes ohms

[@javierosorio7159]

What about if you dont have a master or slave switch

[@THESUBZILLA]

did you watch the video? lol

[@marcomartinez9181]

So your getting double the power?

[@dantefrierson5797]

How many fuses did you use and what sizes where they and locations

[@1Goldcutty]

Can you strap 2 amps to 3 DVC subs? Or will it not be a good idea??

[@tommydorsey2200]

This sounds like my setup, 2 4ohm type r's & 1 2ohm all 3 dvc @.5

[@Petethebuilder]

So how do the ohms work on the amps and subs? If I have 2 amps 1ohm stable and 2 subs that are D2ohms how do I hook the subs to the amps at 1 ohm????

[@regalcarveiro4159]

I’m trying to bridge two motherboards (skyworth tv) so I can I have 2 instead of just the one powering my sub. Would you be able to assist me?

[@robncasey1216]

I’m Rockford Fosgate P series. Specifically a P6002 & a P2002. They have a pass through set of RCA’s is that the same as the bridge feature on these amps?

[@SundownU12s]

This vid is a great source but to make sure I have it right, can you strap any two amps or do they have to be twins like the ones used in the vid?

[@BlaserBuilds]

Same.

[@Teamlakers879]

No they dont

[@downhilldaddy9346]

Great explanation! 🤙🏾

[@Quadredrider]

Should the amps both be the same size or does it matter

[@Gun4HireGFX]

Can you do a video on tuning subs? like for example I had mine tuned when my the audio system was installed and when my battery died it wiped everything from the receiver and they visibly sound different and can't really find videos on how to properly tune. Thanks

[@BlaserBuilds]

rw06an What head unit do you have? Each Head unit is has quite different settings so that may be challenging. All of your amp settings should be the same, and your head unit would have been reset to zero. Does it sound different or just not as loud?

[@Gun4HireGFX]

It's a Kenwood DDX371, if anything it sounds like there is alot more bass on every song. Before the sub would be at a -2 or -3 on the headunit and it would be fine but now its more like a -8 or the bass is way to overwhelming even on songs where you don't much much bass like alternative/classic rock etc.

[@BlaserBuilds]

rw06an I wonder if you have an EQ setting that changed. I'm not familiar with that head unit but I'm sure there are more settings than bass level.

[@ronnydisalvo80]

This will work hooked up to 2 dvc 2phms wired in series?will it split the power out to each sub?

[@jarredallen2016]

Can you strap a 500.1 to a 1200.1?

[@n2ruder]

What subwoofer is that if you don't mind my asking? That thing can clearly take some abusing

[@BlaserBuilds]

Dayton Audio 8"... Dont remember model.

[@dandrecoleman7976]

So doing this method you can turn 2- 2000watt amp into 1- 4k amp?

[@christophermcmillion9431]

did you find you answer ?

[@rodneyhendricks2412]

I’m doing 2 1 ohm load amplifiers will I still can run a 1 ohm load????

[@zayakaliga5626]

My little bit confused about the 4door speaker…

[@Jordancade2010]

i am trying to do this on a skar audio RP-800 .1D 1200 watt amp does it double the power

[@NoName-gk2sj]

Can u do this to 2 xca 1800.1 kicker amps

[@rodneyhendricks2412]

I’m doing 2 1 ohm load stable amplifiers can I still have my same 1 ohm load after I’m done???? Help

[@bumpylump9236]

No...your new load is 2 ohm. Any lower and you risk both amps burning. Or the power supply will give way. Both fuse will blow. Experience!

[@wakeuptruth8736]

Ive been wondering about a simular way but with 2 2ch amps that are bridgeable. Like is it possible to bridge 2 amps into bridge mode to work as 1? Like on 1 amp take the neg - of 1 going to the pos+ on the other amp and the other positive and neg wire going to the subs like you would be doing it originally on 1 amp to loset the ohm or etc. but make both amps bridged together to make as 1 and then bridge them to the subs? If this is possbl3. which i might try but hope it dont fry them. But hope it would double both amps in watts as they would be combin3d to make both into 1 amp. So say if i had 2 same or equel 500w amps each and if this is possible it would be after all what ive explained would make them both into 1 amp making it 1,000watts

[@johnvancamp1576]

Why does audiopipe say 2ohm minimum when strapping? What load are u at and what have u tried with AP amps? My APCL 1500 is at .5ohm and I pound it daily, however I want to strap my 2nd one, but that would put me at .25. Would rather be at 1ohm, but again manual says 2ohm min.

[@BlaserBuilds]

That be very dependant on the reactive load of the setup... I've wired them below .25 before but this was in a very high ratio 4th order bandpass with 6x impedance rise. This was also not used for music.

[@johnvancamp1576]

I finished strapping them just now and they are not acting right once reaching high volume. The apcl1500.1D has 2 speaker terminals on it (evidently this makes it easier for people who have 2 leads coming out of their dual speaker box) that and being in the absolute Rush for time/day light with a friend only being in the way helping me had me a little confused and may have led to a slight mistake. It was an absolute shit show and I knew better. I will double check the wiring diagram and fix it in the morning and keep you posted. thank you and I appreciated.

[@garyking2480]

Your amp may not be strappable. Meaning it can’t be strapped. Not all amps are

[@johnvancamp1576]

@@garyking2480 I had it right, was having a diff issue. Amps are currently at . 25ohm and let me tell ya... BOOM! So much different then 1 1500 at .5ohm. Now let's just hope I don't fry them since they're not rated under 1ohm...

[@johnvancamp1576]

@@BlaserBuildsStill daily beating up my '12 STI with 2 AB 12s and 2 Audiopipe Apcl1500s wired down to .25. I think the car hits, radar detector and rear view mirror will not stay on windshield. By far the loudest I have ever owned, but 1 thing that bugs me is it hits high (60hz) notes best. Need to build a new box and port it through the rear trunk deck. through.

[@PMAZMechanic]

I got two of the same amps how would I do this with two subwoofers dvc 2ohms

[@rickylanding8379]

Thats a great question one positive n one negative for two subs that are 4 trying to be pushed to 2 this way is impossible.

[@rickylanding8379]

I got two subs hooked up to two amps in my trunk right now that are in the same exact scenario that you described and is not hooked up like this in any way shape or form and they fucking knock

[@PMAZMechanic]

@@rickylanding8379 how do you have it set up ?

[@rickylanding8379]

@@PMAZMechanic oh bro since then i now got 3 amps hooked to 3 12s running each amp to each sub and there's actually enough RCA jacks in the back of the radio for all of it

[@PMAZMechanic]

@@rickylanding8379 they all play the same ?

[@kingcutzz]

I have a audiopipe 3000.1d....it only has input and output connections only....and i want to strap a audiopipe 2000 that has both input and output and bridge in and out...can they be strapped if so how?? Please help!!

[@officiallyisaiah6408]

How would I hook up 2 small amps inside a Logitech subwoofer box and a Sony amp thats already in the box? They box are already in there but they aren’t in the original amp form. I’m hooking up 2 12” subs

[@devindexter]

Officially Isaiah you dont

[@robshekelberg5315]

Officially Isaiah you gotta rewrite that whole sentence homie I have no idea what you're saying lol If you're asking if you can hook up a home audio amp to car audio subs, probably not, the power is too low and they probably cant even handle 2 or 4 ohms more like 8

[@cybordeath8075]

Rob you can power car audio subs on a home audio system I myself have a 12in 500watt audiopipe the hits vary hard on my 1000watt home audio sanyo receiver on occasions I bring my 15in 2200watt q power out from my car and it'll get loud enough where its rattling mine and the neighbors Windows playing comfortably with the receiver shutting off took me a bit to learn the receiver overload point but I don't believe that what he is asking think he's just wanting two amps to replace the one already inside his subwoofer box to take up less space and maybe keeps them cool from the subs moving the air not sure if thatd be enough to make a difference I know I had to build a cover for my 5150watt amp so I could put stuff in the back of my hatch without smothering and overheating it or breaking it because it would only fit in a open area on my vibe

[@johnvancamp1576]

Yup I have powered many car speakers in my house ever since I was like 8yrs old and had NO clue about ohms law. He would also be surprised that a lot of AC amps run at 4ohms and seen a few that do 2ohm.

[@emanuelc3926]

I have a question about strapping amps, i have to razor 2500d mono amps that i okly have one rca jack unlike the amps you showed in your video with input and output. How do i strap them together in this situation

[@AntDaMan856]

If I'm not mistaken cuz I have the same amp I think that's what the phone line looking thing is for? Don't quote me on that. If u find out how to strap them lmk man

[@DJKEYS-br1xh]

All amps are not strspeble

[@filteredview9302]

what if my amp doesn't have the Bridge input. is it impossible to bridge? [Sundown SFB-2000D amp]

[@cuh_2023]

But I want to keep my 2 ohm load or 1 is their any way to fix it

[@rebelfromva]

Without a master/slave switch, how do you set the gain on the slave amp?

[@rickylanding8379]

Master controls everything

[@vettonator]

Do you know if this can be done only on the input side so that both amplifiers are synchronized and only have to use 1 bass knob and one set of inputs, but instead of linking the outputs together as a single Channel, just hook them up where there's one amp on each speaker? Do you follow what I'm asking here?

[@johnvancamp1576]

The way he shows it in the video you would only have one bass knob and 1 amp controls the other if you hooked up the amps individually (one to each subwoofer) you then would have two Bass knobs, two gains to adjust, etc which is not ideal.

[@coopergt500twin5]

Just connect both amps on the same set wires 😂 remote aswell one bass knob is all you need y’all wild

[@tycdoesit2852]

thanks great video

[@jsfkmm]

But for the pos and neg to turn on the amps do i have to have both pos ans neg ran to both amps or jump them like everyrhing else

[@zakprice8176]

Are audiopipe amps bad for their RCA's going bad in them

[@bestreview6883]

Can i do this with 2 jx500/1d mono blocks

[@gnarlytek1331]

Do u get more when trapped then if u wire each sub to to each amp

[@Iron_socket]

Can you strap em if one amp only has one set of rca?

[@3finger10]

Could you show how to daisy chain those same two amps please?

[@BlaserBuilds]

3finger10 Yeah I could Probably do that....

[@BlaserBuilds]

3finger10 I got that video done. I'll upload today or tomorrow.

[@3finger10]

a21bravo Thank you......

[@alexalvarez3693]

What do you wire the subs at

[@tristenfletcher577]

do you have to strapped them to get more power or can you just hook an amp to each sub

[@BlaserBuilds]

Tristen Fletcher Depends on the subs and wiring configuration really. But yes in most cases you can just run one amp on each sub and get same power.

[@tristenfletcher577]

OK what about 2 dual2ohms 15s

[@BlaserBuilds]

You could just run one amp on each sub wired parallel at 1ohm each... Then each amp would see 1 ohm which would be the same as strapped with subs wired series-parallel... If you wanted more power you could strap with subs wired parallel but then each amp would be seeing .25ohms which I wouldn't recommend for anything but burps on strong voltage.

[@tristenfletcher577]

OK so the strap able amps can you use the rca Jacks input and output off the amps

[@a-75n5lee4]

B4 I knew anything about this. I had 2 Rockford Fosgate Power HX2 2X2ohm 15" and 2 Kenwood Excelon 810D that was 1ohm stable but shut off, even fan cooled! So I added 2 more and level matching one on each coil each sub tho it in all out had around the same power it sounded better and ran cooler at 2ohm than 1ohm.

[@mxm190]

No hot and ground to the slave amp just the remote wire?

[@BlaserBuilds]

mxm190 You don't even need to jump remote to other amp, it's just easy... As long at it has a source.

[@mxm190]

a21bravo I don't understand, with all the hype about your amp needing every volt you can muster up from alternator, batteries, capacitors... How does the second amp get power and ground with only a remote power?

[@billythomas9434]

You still have to run the power and ground leads to it he just jumped the remote from the other amp because it’s easier than running 2 full length remotes when you don’t really need to

[@lukeglavan]

So if i strap my amps, and i have 2 bdc4 2ohm subs wired to 2ohms when i hook them up the amps will show 1ohm per sub?

[@JWard2]

Why strap? Why not split the RCA with a y cable?

[@kraigsowells7685]

What if you have two 2 channel amps

[@boosie55able]

Am try to strap my two amp together can i use out line converter

[@user-sk5cv7hj2m]

Maybe not power up a sub on top of the amps that close might create a emf field and damage a part?

[@Silkmaster4200]

Will it work if one amp is smaller than other or vice versa linked together?

[@RyanBassForLife]

Nice I strapped my 2 hifonics amps.

[@JosueLopez-hp7oi]

What about grounding?

[@jcschneiderr]

My question do I need 2 wires ran to battery or just 1 and jump?

[@BlaserBuilds]

C Los You could use a distribution block off of one wire... Just make sure the wire from battery to distribution block is the proper size to handle the extra current draw, and fused properly.

[@3finger10]

Do you like those amps? I have 2 of the same and I'm about to put them on 4 hdc3 soundqubed 10's. hope there good.......

[@BlaserBuilds]

3finger10 Watts per dollar they're great...

[@davidhouser1249]

Maybe you can help me out with my issue?? I have s hypnotics zuss 2400 amp that just has rca input and outputs not slave or master. I bought a mbqurt amp that has selector switch master or slave and input rca and then it has master out and slave in! How can I use my rca to get signal to both these amps and still use my level control for the zuss??? I Esther can't get any sound out of the mbqurt amp or I have to let it be master and run one rca splinter to just one side of hypnotics and when set gain about mid way it looses power instead of gaining it. Idk what I'm doing wrong

[@BlaserBuilds]

David houser They're different Amps so can't strap them like in video... if you wanted to use one level controller for both amps get an LC-1 controller and split signal to both amps.

[@davidhouser1249]

a21bravo I have a controller that came with the hyphonticts amp, problem is when I run my rca cables to hyph amp input and then hook another set of cables from hyph output to the input side of the mbqurt 800.1 amp the level remote when about half way makes it sound funny and the volume goes down not up until I turn it about 3/4 of the way

[@tharmarajtharma7893]

Brother if I bridging 2 mono, each one 1 ohm, so can I get 0.5ohm??

[@78758nate]

You can strap 2 amps to run at 1 ohm if the amps can handle running at 0.5 each. For instance if you run a pair of amps that are rated 1500 rms @ 1 ohm each, wiring to 1 ohm strapped should give you over 4k rms due to each amp seeing a 0.5 ohm load

[@downhilldaddy5282]

Ok so two work as one but does it double the power output?

[@BlaserBuilds]

Yes

[@downhilldaddy5282]

@@BlaserBuilds right on

[@elreks1]

so does power doubke when strapping?

[@SunilChauhanFM7728]

What the benefit why u 2 amps hookup at 1 subwoofer the power is double for eg.each amp 500 watt so the main power is 100p watt

[@SunilChauhanFM7728]

1000 watt

[@dirtydantb5911]

Where can I find single rca cable?i can’t find single car audio rca anywhere!or if I have 2 channel rca’s can I just use 1 end of them?

[@bowsama07]

Down4sound.com just got sundown audio single rcas