How to STRIP Copper WIRE | Top 3 DIY Stripping devices | INCREDIBILE

How to Strip any Copper Wires in just a Couple of Minutes | 4 New Lifehacks.
Machine for Stripping thin Stranded Wires | Do it and you'll get rich.
Extracting Copper from Wires to buy my Cat food😼
How to Clean copper Wires without Special Tools | 4 New Life Hacks.
How to Clean Copper Wires with a Wrench.
This is all you need to strip any wires. Top 4 Homemade Knives.
This video will make your Life Easier | Best Homemade Wire Stripper.
How to strip a lot of wires in a short time, The best knife
Best Knife for stripping wires | Make it in just 5 minutes.
Extracting copper from wires is much easier with this tool. 2 best ideas.
The best Tool for Stripping Copper stranded Wires, do it yourself.
_________________________________________
Universal Stripper for all types of wires | DIY
My 5 Best Inventions for Stripping Copper Wires.
Best Knife for stripping wires | Make it in just 5 minutes.
How to strip insulation from any copper wire in 5 minutes. The best method.
#copper #stripper #cable
Best Tool to Clean Copper Wires from Insulation.
In this video I will show you how to make devices for stripping copper wires and cables, this machine will help you easily remove insulation from any copper wire,
You can make this machine with your own hands, easily and simply from almost improvised means. This is the simplest cable stripper and you can easily clean large quantities of copper cables in a short time. This is the simplest machine for cleaning copper wires, even a child can make it.
__________________________________
How to make a copper wire stripper, how to make a machine, a cable stripping machine, a do-it-yourself machine, how to strip insulation from a cable, how to strip any copper wire, a cable stripper, how to easily split a cable, a stripping tool, manual cable stripping machine, copper, how to clean copper, how to burn copper wires, copper wires, copper cable,Copper, how to burn copper wires, copper wires, copper cable, how to strip insulation from a cable, how much you can Earn, non-ferrous scrap metal, handing over scrap metal, searching for Scrap metal, how much you can earn by handing over copper, how to strip a cable, how easy it is to cut a cable, copper, a lot copper, how much is a kilogram of copper, where to find copper, medi,

[@CopperKing]

Hello. I will be glad to see your comments here. You are best.❤

[@user-lw7qi8dd9q]

So satisfying to watch. Saving up alot of cables myself from the sites i work on going to give it a year n see wat i end up with. And im a joiner and gonni make a wee device like this. Cheers for the ideas bro

[@StampsCoinsValues]

Thanks for sharing my friend Like 👍453

[@ajcobbs]

Not bad! Great thinking. The first tool you've created I had in mind to make it too but for coax cables..3 blades (fixed of course).

[@carlynnserrano2664]

Awesome wire strippers love them thank you

[@CopperKing]

Thank You may friend

[@almacli8360]

Thanks for the tips 🤜🏼🤛🏼

[@CSltz]

Man you wanna talk about a “Hand Held Vise” 😱

[@scrappingonthefly77]

Lol great video my friend. Finally someone willing to step outside the bounds of safety to show a great tool being made !! Some people may never take the chance of getting out of the house to collect the knowledge of using this wonderful tool !!

[@user-rz8nu8ni5j]

Lucky he didn't drill into his hand! 😮

[@CopperKing]

No, no luck, it's called Experience.

[@spitfire260381]

Experience would call for a little more safety lol

[@billybbob18]

I've done that.

[@jasonhathaway9746]

No, it's inexperience. You have not been working in a shop long enough to see the trauma of a man ruining his hands and then the lose his ability to work his trade by destroying his hands.​@CopperKing

[@ChanceWilkinsTwin]

Gen z cries about everything it's pathetic

[@user-rv5ht7bl9h]

Все видели как он хотел себе руку просверлить?

[@user-gd7vd4mh5x]

Excellent Idea.

[@scotgustafson3270]

May i suggest that you use the money you get from copper salvage to buy a vise and some gloves.

[@EelingStudios]

Made me wince but they look like young hands so he'll learn the hard way.

[@user-uu8xj6cf8w]

Great idea useful to all of us thanks

[@carlosalbertolopes7745]

Fios rígido é fácil, quero ver cabo flexível

[@conniedavis6274]

Awesome! I'm making one!

[@bodybywill]

Great tool when you in the the field and no vise thanks for sharing

[@CooLDEaFY4204Me]

0:45. What re you thinking ? You going hurt your hands lol. Good job

[@MikeySmithJones]

Love this!

[@CopperKing]

Thank You

[@jontwilliamz3850]

That is the exact way I'd make it !! r u from Kentucky ?! Lol i have cut myself both safe & like this so

[@joefalcon870]

second one only good for single strand of copper wire?

[@wszechmocnieuzdolniony]

Super ❤

[@user-lk2cr4kb5l]

My friend, these cables that you show are for 110 volts, we have 220 volts here so they are more powerful, your outer coating is very soft, with us you can't cut them with such knives, you have to have a very strong machine, and sometimes they cut still not good, then don't forget if you find old cables that are dry and hard, you can only burn them

[@sambishop4720]

False

[@357pegas]

Why do you hate your hands?

[@janoschbudde4815]

😂

[@eaglebill3738]

Sorry, I just can't watch you holding the piece in your hand while drilling.

[@rhondahennessy76]

My grandson with autism loves to watch videos like this but wouldn’t under the danger of drilling into wood whilst holding.

[@hungngovan7981]

Tuyệt vời

[@claudiocerutti7517]

Solo el último puede funcionar previa reforma. Hay gente para todo .

[@josecorreia1715]

Você é um perigoso a trabalhar dessa maneira com maquinas😮😮

[@abbyerice980]

Where do you get all the supplies to make everything in the video

[@cemmas]

You really want your audience to visit ER :)

[@CopperKing]

I don’t know what kind of EP this is, but I suspect it’s not very good. I don’t encourage anyone to repeat after me, I’m just showing the principles of operation of different tools, but everyone does the job as best they can, I don’t have enough tools to ensure the safety of my work

[@7628739]

I went to the hospital and had to get sticker, great idea!!

[@user-pk6jy1pp7j]

Prenda a madeira em uma morsa, execute o furo com segurança! Como se faz um furo segurando a madeira com a mão embaixo de apoio meu deus 😂😅

[@CopperKing]

Ok meu amigo, ouvi você, obrigado pelo conselho, mas estou gravando um vídeo em casa e não tenho as ferramentas certas. Obrigado pela compreensão

[@OldGrayCzechWolf]

​@@CopperKingYiu don't need a vise, just put the workpiece down on a surface so your hand will not get drilled. A couple of C-clamps might have helped hold it in place. You are lucky you are not disabled for life.

[@MINELAB600]

О технике безопасности слышали?

[@CopperKing]

Что это такое 🤔

[@MINELAB600]

@@CopperKing мне тоже интересно что это такое

[@CopperKing]

@@MINELAB600 первый раз слышу

[@MINELAB600]

@@CopperKing тоже не приходилось с этим сталкиваться

[@user-qe4ni8wg7t]

I'm not good in thekichen but I can process and cook up a impressive poundage pile on the mini grill then soap water sand swirly after its cooled and bam top dollar low efort short time gotta do it quickly latenight b4 the dew drops likevit never happened

[@user-qg2lb7si2v]

Такая работа дрелью опасна.

[@TavitoPeru]

Tanta ingeniería para que al final pegue la cuchilla con silicona 😂

[@tukeaevy]

music is fire

[@user-ik5kt8fz2u]

❤

[@MskhanLala-yx6gw]

اللہ تعالیٰ لمبی عمر دی اور اللہ تعالیٰ شفاہ عطا فرمائے آمین ثم آمین

[@FlowJudy]

Очень классное видео , спасибо ,с меня лайк и подписка

[@CopperKing]

Спасибо за просмотр и подписку

[@ahsajahan6072]

❤❤❤

[@davisonfaison9147]

Safety first 😮

[@asmkatankovich2341]

Первый способ норм но зачем?! Берёшь концелярский нож и нодфиль. Нож должен быть самым дешманским с широким пластиковым наконечником. Пропиливаешь канавку снизу под 45 градусов выдвигаешь лезвие чуть чуть ложишь на кабель и ведёшь, нож не съезжает и все. Затупился просто обломал лезвие и всё. Быстро и практично. А с этой приблудой что делать если затупится ? ( Сори случайно удалил сообщение и не прочитал ответ ()

[@CopperKing]

Спасибо за совет, я попробую обязательно, то что я делаю это только идея дальше можно улучшить как захочется, можно придумать как менять лезвия если затупится. Спасибо

[@spitfire260381]

All these are fine but you can just take a bench grinder and pull the wire a across it quick easy and does any size, wire

[@gsr1776]

Haw to order

[@LEO-if2ir]

why I need to make a hole in my hand? is gonna hurt?

[@papunblg1988]

DIY : How to make a hole in your hand. 0:42 and 1:05

[@user-tm9fz8dv9m]

👍👍👍👍👍👍👍

[@countryside8122]

For safety's sake use a vice not your hand to drill holes.

[@HMMonirulHuda]

prices koto,amar lagba

[@michaellavery7374]

I just use a Stanley knives to stripp my wire hands and legs are cut off me with the blade slipping when am stripping wire in the car on my tea and lunch breaks 😂

[@gustavosolorzano1120]

Dónde está la seguridad esa persona 😢

[@jasongallagher6046]

Just watching to see when he drills his had 😂

[@MultiCoolage]

Как он себе руки не проткнул?!

[@tre9563]

Drilling a whole like that is violent I watched a guy do this n bit slipped n went right into his hand lost motion in 3 fingers , do not drill anything in ur hand this way, it's to easy to clamp it

[@jimbishop4260]

This has got to be one of the most unsafe person that I have ever seen.

[@CopperKing]

Yes my friend you are right I am 🙋‍♂️ Greetings from Moldova, be happy and don’t worry about me.

[@joseluisbravo4884]

Manos suicifas

[@Jerry-ho5xp]

Keith Urban fighter

[@mojarra1949]

Con la música......prrrrrtttt

[@chrishughes3405]

Thanks for the ideas but in comments you make common mistake of thinking that not being injured previously makes you less likely to be injured in future. Only takes one mistaken slice to cause nerve damage that changes your life. Plus your workmanship would improve, a 6mm drill bit shouldn't make an 8mm hole. Now to carry on hunting ideas which will scale from flex to 10mm twin and earth and 3 phase stuff.

[@familydogg1234]

Nothing worse than a Copper Cut on the hands. Does this work for all gauge wires? Meaning the Hot , ground etc inside? Thanx

[@CopperKing]

🤔

[@shadowgebe7226]

safety first

[@spitfire260381]

Lol funny everyone is dead set on stripping cabels i just toss em all in a fire melt the plastic off in minutes from dozens if cables then toss wire in a barrel with nuts and washers to shine it back up when done 😊 no stripping no fuss no mess

[@user-uh2tw8ym9n]

Burnt wire is not sellable.

[@spitfire260381]

Shure it is you just need to shine it back up i put it in a metal drum with nuts and bolts and spin it with a 3/4 horse motor with belt and pully attached to piece of rebar that is centered threw lid and botton like a big rock polisher lol takes about 20 30min spray a little WD40 or even used motor oil in with it then blow it off with air compressor i can do two 5 gallon pails of one foot lenth pieces per run long as its Shiny and looks clean they take it they melt it down anyway lol

[@user-yg9ov5jj5j]

А вот в твердой оплетке чем чистить

[@CopperKing]

Ножом

[@ahsajahan6072]

😂❤❤❤❤

[@joamarharanha4644]

😅👍

[@beta6274]

Dale gracias a DIOS que no te taladraste la mano

[@edwinespinosa5600]

He could have used a smaller hinge. 😅

[@scotgustafson3270]

Or bigger wood blocks

[@flatbit3090]

I think you need t buy a vice. You know its going to happen

[@shahnawazkhan1382]

Ek screw bimar dete to chal jata Jo karne Khoj rahe ho

[@JuanCarlos-ew4gz]

No maneja las herramientas con seguridad. Pone en peligro su integridad personal.

[@shajiks8749]

Ok2ok

[@joaquimmarcelinodasilva7963]

Segurança = 0 ( zero )

[@user-pk6jy1pp7j]

Fazer furo com a mão na reta ainda mais com uma broca em alta velocidade e ser muito inocente ou muito burro kkkkkk😅

[@CopperKing]

Isso se chama experiência

[@abildgaardfam]

Not it's not its called stupidity

[@user-xg2nj2lh6k]

Хочется попросить призидента страны чтобы он поставил перспективного молодого Санжара Бокаева Акимом кого нибудь города или области. Я думаю он дал бы мастер класс - каким надо быть Акимом в 21 веке. А в общем президент удовлетворил бы просьбу какой-то немалой части общества.

[@user-ue7yv6zb4o]

Оти батисвате кабело бе ора

[@user-vq5cu2px4o]

عذرا لصاحب الفيديو ..استخدام شفرة الكتر غير آمن فعلا والطريقة تأخذ وقتا طويلا ..قم بحرق الأسلاك ثم جمعها واضربها بخشبة مناسبة يعود لها اللون الأصفر مرة ثانية والأمر ينتهى فى دقائق مهما كانت الكمية

[@tommielee8]

READ THE COMMENTS PEOPLE. BEFORE USING OR BUILDING THESE CRAPPY RIGS... READ THE COMMENTS, PEOPLE.

[@klu753]

the jungle music sounds horrific

[@truefacts404]

Yawn 🥱 ok gramps

[@adolfovalero3868]

Ñ

[@epicsasquatch452]

Please use a vice. I cringed watching every step.

[@FausteUndSo-zd4jb]

Also so Bohrt ihr bitte nicht! Immer eine feste Unterlage und nicht in die Hand.

[@FausteUndSo-zd4jb]

Sonst sehr Nice..macht die sache entspannter :-)

[@Mr_Curious]

No way should this insane disregard for basic tool safety be promoted in any public forum. Extreme negligence like this causes uncounted serious hand injuries every day.

[@user-qx6ew2ku8e]

100%

[@michelleduc3137]

you are weird

[@johndiss]

The easiest way to strip a wire is a blade in a vise, but this guy obviously doesn't have a vice.

[@CopperKing]

Well friend, this is just your opinion, and I am in no way offended by you. I just want to emphasize that I work with these tools every day, and I specifically shoot the video with my bare hands, without gloves, so that you can count my severed fingers and severed veins. Good luck to you.

[@Mr_Curious]

@@CopperKing Having had the painful experience of drilling through a block of wood and into the palm of my hand many years ago, I learned my lesson then. Never use your hand as a backstop for anything sharp. That's all I'm saying.

[@pawelmacko3424]

Brak możliwości regulacji ostrza 👎

[@Michael-il5wd]

time>money just buy the real thing

[@aurelpopa1348]

Bundefacut

[@CopperKing]

Mulțumesc mult prietene

[@LifesGoodAhmedAbdo]

17 minutes wasted

[@goinbzurk]

You're an accident waiting to happen!

[@kumaraskh1215]

Even this is some good project, I TOTALLY DO NOT WISH TO GIVE ANY POSITIVE FEEDBACK. 100% SAFETY IS COMPROMISED 😮😮😮😮. SHOULD NOT PUBLISH THID KIND OF SAFETY COMPROMISING VIDEOS IN PUBLIC MEDEA. People might get permanent disability due to this unsafe conduct. 😢😢😢😢😢

[@Wesley-bc6zz]

Your a bench vice

[@WilhelmFreidrich]

Ghetto design. It'll mangle your hands if you use it.

[@tunnelspringsbullies]

This guy should NOT be doing a video where he is completely disregarding any type of safety protocol. You NEVER demonstrate to anyone to drill or cut or any of this without proper safety and certainly never held in your hand to do so.

[@highnoter1]

Reported for harmful or dangerous acts