How to Sublimate on Glass, Canvas, and Blankets: Step by Step Dollar Tree Sublimation Ideas!

[@sss50845]

Thank you, Jennifer! I KNEW there must be a cheaper way than all those other hacks I've seen. You're a genius!

[@JenniferMaker]

Thank you! Happy to help!

[@justwhatido]

Thank you for explaining why you need the lamenting sheet.

[@JenniferMaker]

Any time!

[@justwhatido]

@@JenniferMaker Can you use the same technique with wood as you would with glass?

[@joankelley3772]

Thank you so much! I'm making my first canvas today!

[@JenniferMaker]

Yay!

[@That_One_Duo-123]

Nice video. I would like to see what the photo on glass looked like when held up. Any white areas you had on your print would be see-thru, correct?

[@JenniferMaker]

We have another tutorial at Design #499 in our library 😊🌻 Yes, any light or white is going to be clear.

[@rosaliemetalfemarve9982]

That's great!!! Thank you so much !

[@JenniferMaker]

Glad it was helpful!

[@myteemoe17]

I could cry. I did as you instructed and prepared my materials to print a favourite picture on a glass trivet from Dollar Tree. After the preliminary step of heating (200•C for 60 se, EasyPress2 + Pad), the laminate sheet to the flat side (the other side was patterned), I noticed what looked like a sea of bubbles under the surface. Didn’t I use enough pressure? By the way, I trimmed the laminate close and taped scimpely at points along the sides. I removed tape after pressing. I admit, I didn’t wait long before placing the picture, face down on the questionable surface. Taped. Then 60 sec at 200•C. Picture was still faint. Another 60 sec with some pressure and picture was clearer but uneven. Went to reapply the rubber feet and little spray of alcohol removed some picture. Naturally I went over the whole back of that trivet with alcohol and removed all of the ink and then I wiped it from my hands. Sigh. I’m going to sit down and have my mocha and stew for a while.

[@JenniferMaker]

Oh no! We tried to replicate your exact issue but are not able to repeating the steps we followed. Were you able to find the solution?

[@myteemoe17]

By the way, I’m using Scotch brand thermal laminate pouches (I ripped a couple apart, felt good 😆

[@beverlybuford9055]

Thank you for this video…you are a wonderful teacher! I have a question…..can I use laminating film on bare slate so I can sublimate on it? Thank you for your assistance.

[@JenniferMaker]

Yes, you can use laminating film to sublimate.

[@jamesminer3487]

Is there a chart with the different temps and times you used?

[@sandybrickman1392]

I’m sorry… don’t intend for this to be a negative comment, but…. You don’t ever want to cut on a glass cutting board. It will pretty much instantly dull your knife! Use this for a cheese board or charcuterie!! I love this idea and had been wondering how to do this!! I can’t wait to try this technique!

[@Southerngirl7305]

Thank you Jennifer for this amazing tutorial.

[@JenniferMaker]

You are so welcome!

[@isholathomas2157]

Jennifer can you use InkJet ink on sublimation paper or do you have to have a sublamation printer

[@sandieparker2471]

You are amazing, Jennifer! I truly don't know what I'd do without you! Yes I do, I would have gotten rid of all my Cricut stuff a long time ago. Thank You for sharing yourself and your talents with all of us!

[@JenniferMaker]

You are so welcome! Thank you so much for the kind words! 🌸

[@marybraunlich]

You show the galvanized metal blanks from the Dollar Tree. I've watched both Sublimation on Dollar Tree items but do not see your recommendations for temp and time. Could you please share? Thank you and have a blessed week!

[@JenniferMaker]

You can try 385 for 10 seconds.

[@brandyherrera3539]

Okay i really want to try doing sublimation prints. Can i use my easy press 2?? Or do i need a heat press for it. ??

[@JenniferMaker]

You can use your easy press 2.

[@Infinite8Designs]

Do u have a video where u engrave on aluminum cards? And on how to get rid of the small metal peices and how to polish or sand them down

[@JenniferMaker]

take a look here jennifermaker.com/cricut-maker-engraving-tool-metal/ 🥰

[@RebeccaMcDonald-c2o]

Will self-adhering lamination sheets work as well as the thermal laminating pouches?

[@JenniferMaker]

The key difference between thermal laminating sheets and self-adhering lamination sheets is that thermal laminating sheets require heat from a laminator to seal, while self-adhering sheets only need pressure to bond and can be applied without a machine, as they have a pressure-sensitive adhesive on one side that sticks when pressed onto a surface. jennifermaker.com/sublimating-on-glass/

[@kathyspiller9748]

AS always , great video. I can't get my sublimation to transfer. I put on the laminating sheet and then I press my sub design 205c for 60 seconds. Only a little ink has transferred. Any suggestions?

[@JenniferMaker]

There could be many factors here. You can show photos and ask in the very helpful group. facebook.com/groups/sublimationmadeeasy

[@1bbshopbrat]

I love watching and learning more about sublimation from you. Since I am just getting started do you HAVE to use card stock on the bottom or can you use teflon sheets? Can you reuse either or are they always a 1 and done use? Seems like a lot of trees are being wasted if using new cardstock and butcher paper for every project.

[@JenniferMaker]

Yes, you can use it on the bottom.

[@rebel3217]

If you use Rapid Tac to apply the laminate would that eliminate the wrinkles?

[@JenniferMaker]

We haven't used that method yet, but it might!

[@laurarader1959]

When using the laminating sheet, how do you keep the plastic from peeling up in the corners? And would you say they are strictly for decor? Can the plastic withstand handwashing?

[@JenniferMaker]

It should not peel and the image goes on the backside so you can cut on the top and hand wash.

[@erikamier2537]

Hi Jennifer! So sublimation will not take to canvas bag without the plastic Laminating Pouches? I was just about to try a canvas bag then I saw your video. I would have been super upset had I tried it first and ruined my super cute bag!

[@erikamier2537]

This is so awesome!!!

[@suewright8426]

This was great thank yiu!!

[@JenniferMaker]

I'm so happy it was helpful!😊🌻

[@debraburke2130]

We’re doing the glass cutting boards. Can I use them in the dishwasher or do they have to be hand washed?

[@JenniferMaker]

I prefer to hand wash.

[@lade1688]

Hi iam new at this crcuit stuff i love making crafts but my only issuse is what kind of paper do i use for my heat press machine red and white one thank yu

[@JenniferMaker]

I list the materials in the materials list on the blog post depending on which project you are making.

[@erindoesthethings]

Could this work well on libby glasses? I have a ton.

[@JenniferMaker]

Sublimation needs to have a poly coating to sublimate on.

[@mariselaberlangamariberla9018]

I tried the laminating to the canvas as would not stick at 350 for 30 secs with an easy press (don’t have a heat press machine). I increased temp to 370 for 40 secs and still did not stick to the canvas. I sublimated directly to the canvas and noticed the colors were a little dull, but then I just sprayed it with high gloss spray and it worked. Brought out the colors.

[@JenniferMaker]

Wow! Good to know!

[@mariselaberlangamariberla9018]

@@JenniferMaker Yes cuts down on using the laminate.

[@rosabellred1236]

I just got a printer it was sooo helpful

[@JenniferMaker]

Yay! How exciting!🥰

[@paulineplanck6832]

Hi 👋, I've been looking forward to this all day 😊

[@zina6581]

Love this!

[@JenniferMaker]

Thank you!

[@kimkwood]

Have you had trouble with the cutting board print fading after time?

[@JenniferMaker]

Not as of yet.

[@brendaallred2319]

I tried sublimating the canvas but only the edges sublimated. Do you remove the canvas from the frame? TY!

[@JenniferMaker]

Yes, go to 11:15 in the video to see.

[@AdrianaHernandez-fh1zj]

Can I use a regular inkjet printer to sublimate on glass?

[@JenniferMaker]

In order to sublimate these, you would need the design printed from a sublimation printer. 💗

[@kennethclarke3503]

Good morning I am a 65 year old grandmother and want to purchase a eco tank Epson. I am a beginners. I am looking at Epson EcoTank 2803 series 2850, 3850, or 4850 Is this a good idea? Thank you

[@JenniferMaker]

Check out jennifermaker.com/sublimation-for-beginners/

[@ValYo0623]

Is there a laminate that is not shiny? Like a matte laminate? Thank you for all your videos!! So very helpful!!

[@rebel3217]

Have you tried sublimating on glass cutting boards using white permanent vinyl? WhenI did it the images looked really great at first but after a month or they seem a little blurry.

[@JenniferMaker]

I have not tried that. Hand wash with mild soap.

[@robinstumpp7540]

They were never used or washed. They just get blurry sitting for a while

[@shannonebryan5475]

Thank you and love the Sublimation on Glass !

[@JenniferMaker]

You’re so welcome! Thank you! 🌸

[@gerryannbrown9645]

Thanks, Jennifer, I have used laminate on wood Love doing that. I've got to visit the dollar store, its just around the corner from me. Your the best Teacher ever!

[@JenniferMaker]

You are so welcome! Thank you so much! 🌸

[@traceyfrith2743]

Can you just use butcher paper on the bottom layer instead of the white cardstock?

[@JenniferMaker]

Yes, you can double layer it if it needs it.

[@sandraberger469]

Thank you for this video. I'm wondering if the Easy Press 2 can used for the cutting board instead of the big Heat Press.

[@JenniferMaker]

Yes you can!

[@clairecolchester7345]

What fabric is the blanket you use

[@JenniferMaker]

They are polyester in plush and fleece. jennifermaker.com/sublimation-blankets-ideas/

[@pamiacobini1669]

Can I just ask about the rubber feet on cutting board aren't they supposed to be on the other side?

[@JenniferMaker]

Since the cutting board is clear, it appears as though the rubber feet are on the wrong side. You will sublimate onto the back of the cutting board in order to keep it safe for food.

[@mzsgthom]

I have tried to get my prints clear and every time although my prints are vibrant on the laminated sheet, it looks like tiger stripes in the print because of the rippling of the laminated sheet! I’m so frustrated what am I doing wrong?

[@JenniferMaker]

You might want to try more pressure.

[@angelafarrugia5420]

Love watching your videos thank you 💕

[@JenniferMaker]

You are so welcome! Thanks for watching! 🌸

[@yadiravasquez7549]

Can we sublimation on cotton shirts

[@JenniferMaker]

Not without some sort of sublimation spray, powder, or sublimating onto white HTV. Cotton is a natural product and the ink doesn't bind to the fibers. 😊🌻

[@Decay3333]

can I do this on a mirror?

[@JenniferMaker]

Yes, I have seen it done on a mirror frame. jennifermaker.com/dollar-tree-sublimation-ideas/

[@rosabellred1236]

❤️

[@JenniferMaker]

🥰

[@cynthianegrete5067]

Great ideas. Always love your videos.

[@JenniferMaker]

Thank you so much! I appreciate it! 🌸

[@JaxJaz2016]

@jennifermaker I Love you & All Your Videos and All That You have Taught Me!!! So THANK YOU!!! However, your website has SO MANY ADS that it makes it hard to navigate, scroll your page or follow instructions!! Quite Frustrating.........

[@JenniferMaker]

Adding a pop=up ad blocker can help with that on all websites.

[@JaxJaz2016]

@@JenniferMaker Yes I'm sure that would work, however Your Website is the only one I follow that does this. I get it, people receive payment/commission for ads on their social media and websites, but this is just a bit much, especially when You are the one controlling the Ads on your page. When I go to your website, the entire screen just fills with ads, its just crazy.

[@korneliawrobel280]

Are all these sublimation iteams, or juat normal ones, i tryed using a just a normall glass before and it did not work 😪

[@JenniferMaker]

It still needs to have a poly coating for sublimation to work.

[@shawngallagher680]

Can someone please help me, when I make a design in cricut design space I go to click on make it but there is no make it button like there usually is. Btw I’m on an iPad. Please help me if you can

[@JenniferMaker]

Is your Design Space up to date? You may want to ask Cricut about this if you are in the latest update and it continues when you log in and out again. help.cricut.com/hc/en-us/articles/360020316674-Cricut-Contact-Information

[@shawngallagher680]

@@JenniferMaker my design space is up to date and it still doesn’t have the button.

[@yaritorres8347]

Love your videos

[@JenniferMaker]

Thanks so much! 🌸

[@Agdolladultfan]

My laminating sheets aren’t working please help So upset

[@JenniferMaker]

Oh no! Send us an email, we'll be happy to help. [e-mail] 😊🌻

[@Hammer500]

Thanks I enjoy it

[@JenniferMaker]

I'm glad you enjoyed it!

[@areyoukiddingme6741]

Thank you so much for sharing your knowledge and handy work. As usual your stuff is beautiful. Your sublimation video this afternoon was great, thanks again 🙂

[@JenniferMaker]

You’re so welcome! I’m glad you enjoyed it! 🌸

[@theasyper5298]

Love it thank you

[@JenniferMaker]

You are so welcome!

[@wandabalket7985]

Thank you!

[@JenniferMaker]

You’re so welcome!! 🌸

[@danieller9645]

I must have missed the final results because I only saw results for the glass cutting board. But I did not see the results for the blanket or canvas. That's not usually like you.

[@danieller9645]

Okay I saw the blanket. Sorry

[@danieller9645]

okay completely disregard my comment. I must have looked at my dog during this.

[@danieller9645]

🤣

[@lisahughes3012]

i like your video🙂

[@JenniferMaker]

Thank you so much! 🌸

[@Darty1979]

I noticed that you only used a few pieces of heat tape on the stuff you sublimate here , when i do that on a mug if its not taped real good every outside inch then it tends to have fading , how are you able to do this and not tape all sides of the cutting board image that you put on it? thank you

[@JenniferMaker]

The tape is only to keep it in place when it is pressed. The Autopress works fantastic and applies the right amount of pressure. You may need to apply more tape with another press to hold it in place better.

[@AndrewsMemorial]

mugs are round and require a lot of tape to keep the paper pressed against the mug. these are all flat objects so the paper lays against them without needing tape to hold it down. the tape here is just to keep it from moving when you place the protective paper on or off

[@jadamcdonald4002]

My laminate sheet keeps coming off 😬🤣

[@JenniferMaker]

Let it cool all the way before removing the transfer sheet. 😊🌻

[@lade1688]

Hi iam new at this crcuit stuff i love making crafts but my only issuse is what kind of paper do i use for my heat press machine red and white one thank yu