How to sync using MIDI Sync or Trigger Sync?

  Рет қаралды 57,566

Nu-Trix The Synth Guy

Nu-Trix The Synth Guy

4 жыл бұрын

How to sync using MIDI sync or Trigger Sync? What is MIDI Sync? What is trigger Sync? MIDI sync versus Trigger Sync? How does Sync works?
I have seen so many question online about how to sync 2 music devices that i decided to make a video about it. Sync is hard, Sync is complex. In this video I try to simplified the concepts of sync to the most useful info so you can configure your setup.
This was triggered by a question I got last week " How can I sync My Korg Volca Beats to a Roland Boutique Se-02 and have the Volca control the sync?" .
Here is your answer.
★Support Nu-Trix
►Become a YT MEMBER (and get access to exclusive content) : www.youtube.com/@nu-trix/join
►PATREON : / nutrix
❤️ Thanks to all my PATREON supporters❤️
**Thanks MobileMusicPro for being a patron : check out his YT channel : / @mobilemusicpro
**Thanks Bleass apps for being a patron : check out their wonderful apps:
www.bleass.com/
►NEED HELP? 1 on 1 consultation (online):
If you're looking for help and need a 1 on 1 consultation,
www.nu-trix.com/1-on-1-consul...
♫Nu-Trix Music:
Nu-trix on iTunes: apple.co/3NflMN2
Nu-Trix on spotify: open.spotify.com/artist/7LXHQ...
►Follow me online:
www.nu-trix.com
/ nutrixmtl
/ nutrixsynthguy
/ nutrixmtl
★FREE GIFTS★
www.nu-trix.com/free-circuit-...
-49 Percussive samples from my BassStation II, Volca Beats and iPad apps
-A Nu-Trix Novation Circuit PACK
-64 percussive native Circuit Patches
-64 samples

Пікірлер: 315
@gerryk9
@gerryk9 3 жыл бұрын
thanks very much. you have made the BEST video to explain sync in/out vs MIDI, and what MIDI is.
@Nu-trix
@Nu-trix 3 жыл бұрын
Thanks a lot!
@Vaforadeicoioni
@Vaforadeicoioni Жыл бұрын
I agree. Am a beginner, and this was very clear.
@7Spronge
@7Spronge 3 жыл бұрын
Threw all my devices in the lake ... they're syncing perfectly now.
@Nu-trix
@Nu-trix 3 жыл бұрын
Lol. I’m guessing my accent is causing this.
@7Spronge
@7Spronge 3 жыл бұрын
@@Nu-trix haha , not really, your accent is just fine, both words just sound the same. And thanx for the useful video.
@blockerdaniel7887
@blockerdaniel7887 4 ай бұрын
Threw mine into a sink. They're not syncing. Gotta try the river next
@akrobatish
@akrobatish Жыл бұрын
calm, articulate and no BS. I love it. Glad to have found you good sir!
@Nu-trix
@Nu-trix Жыл бұрын
Thanks
@cablenorth3297
@cablenorth3297 11 ай бұрын
As soon as I watched this video I was able to sync my deluge with my microfreak knowing absolutely nothing about midi or clock sync. Thank you so much.
@farfisa5
@farfisa5 3 жыл бұрын
This is wonderfully coherent and concise. The explanation of the ability of MIDI cables versus analog sync cables was unexpected and definitely appreciated. Thank you for this video.
@aaronthompson317
@aaronthompson317 2 жыл бұрын
Well put and properly succinct. I am presently trying to rearrange my small “studio” incorporating a couple new devices and this is certainly helpful. From my ‘beginners mind’. Thank You Sir!
@andychase5213
@andychase5213 4 жыл бұрын
Thanks for that, without doubt the most useful informative video I've seen on this subject. I have synths and drum machines from, Moog, Korg and Arturia and it seems that you are expected to just know how to make them play nicely together ! Great video.
@Redefine01
@Redefine01 2 жыл бұрын
Great description, while I certainly understood what Sync and Midi are I did not know that the definition of Sync - changed from device to device. This explains the oddities I ran across in trying to get Roland to sync with non Roland devices.
@mancavemusician
@mancavemusician Жыл бұрын
Thank you. I'm new to syncing devices and this really helped me to understand my setup. I'm fortunate in that I'm using an MS1, RD8 and TD3 so no cross platform issues as such but it really helped me to understand why 'position' data isn't passed on on start / stop.
@LjClock
@LjClock 3 жыл бұрын
.. this video was super helpful! i have a korg, and Roland 88, and have been trying to figure this all out, thank you for explaining this.
@philipsheard624
@philipsheard624 2 жыл бұрын
Extremely useful thank you. Currently researching as I am a novice trying to sync up a Korg Monologue XD, Roland TR-8s and a EricaSynth Bassline DB-01.
@MaxParkerMusic
@MaxParkerMusic Жыл бұрын
Sooo helpful. Just got a boutique JU and want to pair it with a volca eventually. This video confirmed that 1. I can do that and 2. How. Really appreciate it
@tsgodman4409
@tsgodman4409 3 жыл бұрын
You're the best Nu-Trix, this is a fantastic video, keep up the great work mate, thank you so much.
@svf1972
@svf1972 2 жыл бұрын
Great explanation, best I’ve found on KZbin. Thanks for doing this.
@philmarchisotta
@philmarchisotta Жыл бұрын
Dude thanks a lot. This answers all my questions. It was like being in a class. Keep up the great work
@jaunejaune
@jaunejaune 3 жыл бұрын
You can actually mod every Volca to add MIDI OUT. Korg did put the chip for OUT but not the connect haha (there is many tutorials). I did the mod for the volca Beat (you can also put very easily an Out for every Drum sounds ) and the volca Bass (which is amazing because it become a 3 sequencer in One machine !!)
@Mistubishi.
@Mistubishi. 2 жыл бұрын
FREEZE!!! KORG POLICE!!!
@Decoy303
@Decoy303 Жыл бұрын
Sucks for people like me who have no knowledge of doing modifications let alone tools. Wish they offered a place that you could ship your Volcas to for v these modifications.
@jaunejaune
@jaunejaune Жыл бұрын
@@Decoy303 I learn by wathing tutorials ! it's pretty easy actually
@yangzhao7908
@yangzhao7908 9 ай бұрын
Perfect explanation and demonstration. Really appreciate it!
@rajeevsiriwardena3936
@rajeevsiriwardena3936 3 жыл бұрын
The best video which describes on MIDI syncing , very technical , thanks friend !
@rainerd9890
@rainerd9890 4 жыл бұрын
thanks for the coherent presentation on sync!
@uriel-heavensguardian8949
@uriel-heavensguardian8949 2 жыл бұрын
Awesome video!!! Thanks for the information!!!!!! Trying to go deeper into midi and this info is so detailed!!
@ferrellms
@ferrellms 3 жыл бұрын
Clear and concise - answered my questions.
@Reeesegame
@Reeesegame 2 жыл бұрын
Thank you so much for the clear explanation. I finally understand how it works
@synthlord2368
@synthlord2368 4 жыл бұрын
Informative as always Nutrix. I got four of the Volcas when I first got into synths. I always wished they had made them with out and through patches for the midi cables. Alas, only the in line. There were some people back then modding them and selling them on Ebay. Haven't seen them in awhile though. I used to have one Volca with the midi line in from and RM1x and used the sync cables for the other 3. It worked but I always wanted more versatility. Ashame they didn't include more midi connections, but I guess they wanted to keep the price down. Still fun units for the price.
@cablenorth3297
@cablenorth3297 11 ай бұрын
Such high quality thank you
@jmcbeady8210
@jmcbeady8210 6 ай бұрын
Great teaching episode.
@jonathanallende9739
@jonathanallende9739 10 ай бұрын
This is exactly what i needed to know! 🙏 Thank you!
@suomiperkele89
@suomiperkele89 4 жыл бұрын
Great video, really good explained. Thanks!!!
@sepehr.rezaei
@sepehr.rezaei Жыл бұрын
Thank you . Video was the best source on internet
@matheusstefanello859
@matheusstefanello859 2 жыл бұрын
thank you very muchhh!! been struggling with that same problem with a behringer td3. i’m a complete beginner and i don’t even now how to google the problems i got 😂. thought i was doing something wrong, thanks again
@earanwe
@earanwe 3 жыл бұрын
Thanx for the vid. I've my first rehearsal nest wednesday (Suán Trepia) and we're trying synching a Roland SP555 with my volca keys. Im so excited, as im asking my 'boss' for a year about going into analog synths for the band and this gonna be first time, but i was really lost into synching them!
@Nu-trix
@Nu-trix 3 жыл бұрын
Glad that it helped!
@earanwe
@earanwe 3 жыл бұрын
@@Nu-trix sadly rehearsal was posponed due to covid restrictions ¬¬ waiting for better times. The idea is on, tho . XXX
@onmas59
@onmas59 6 ай бұрын
Great explanation thanks!
@alanb5690
@alanb5690 2 жыл бұрын
Very good explanation...thank you!
@TheOriginalEG
@TheOriginalEG 3 жыл бұрын
Thank you for this! This helped me so much! 👌
@chriscook2451
@chriscook2451 2 жыл бұрын
Great video, thanks NT!
@nervewar7738
@nervewar7738 4 жыл бұрын
Thanks for this. It seems like something should be so easy and straightforward but it's not, haha. Appreciate it!
@Nu-trix
@Nu-trix 4 жыл бұрын
Sync is one of the most difficult thing to get working. Basically trying to get different devices and software from different brands created by different engineer for different user with different workflow. And in this video I only talked about music sync. Wait until you try to sync MIDI Sync, analog sync, S.M.P.T.E LTC, S.M.P.T.E. VTC, the multitude versions of Wordclork or even Black burst House sync! Now THAT is a real Nightmare! ;-)
@jonathanyoung6397
@jonathanyoung6397 3 жыл бұрын
Damn. Now i understand this. Thank you so much! Subbed... More on Midi please!
@emreacikgoz8418
@emreacikgoz8418 Жыл бұрын
That's what I was looking for. You are the king!
@Nu-trix
@Nu-trix Жыл бұрын
Happy to be helpful
@campoacceso6892
@campoacceso6892 4 жыл бұрын
Perfect and clear, thank you from Italy. (I have an sh01-a and volca beats, and Now i know how to NOT use them. I'm sad)
@andrewburns5697
@andrewburns5697 4 жыл бұрын
Thanks for the video. Clearly explained.
@perrypelican9476
@perrypelican9476 4 жыл бұрын
I think native instruments is trying to standardize things. Great great video. You are doing a good thing by explaining things like you are. A lot of beginners never learn this stuff and end up frustrated after time because they think that after time they should beat a certain level, but of course they need basic knowledge that can be boring to learn. You are making it more fun. Don’t forget you are talking mostly to beginners so fun is important to keep their attention. Anyway, I am just throwing ideas at you. I am no expert. I am sitting in a breakfast place corner Cote Des Neiges and Cote st Catherine getting ideas. Have fun mr. nutrix.
@Nu-trix
@Nu-trix 4 жыл бұрын
Thanks fellow Montrealer!
@simonbaker4834
@simonbaker4834 Жыл бұрын
Explained a lot. Thanks.
@claudioguendelman
@claudioguendelman 2 жыл бұрын
Thanks from Chile well explained... Thanks thanks thanks...
@StygianDogs
@StygianDogs 2 жыл бұрын
Thanks for this video! Super helpful!
@jcjrock
@jcjrock 2 жыл бұрын
Good example. Love your videos
@esssee5121
@esssee5121 4 жыл бұрын
Thank you, I needed this!
@brianmccarthy6655
@brianmccarthy6655 3 жыл бұрын
Very useful, thanks!
@harounsamadi2527
@harounsamadi2527 2 жыл бұрын
Many thanks ! Very helpfull 👍👍🙏
@flix3o3
@flix3o3 Жыл бұрын
Very well explained! 👍
@geminielectro
@geminielectro Жыл бұрын
Thank you. That's very usefull. Soon, I'll have to sync a SH-01a, a Volca sample, and a Behringer TD-3. What a mess.... 😓
@KitCatStudio
@KitCatStudio 3 жыл бұрын
Very useful info! Tnx!
@2009Tosh
@2009Tosh 2 жыл бұрын
Fantastic explanation....
@immerwiedersonntags5744
@immerwiedersonntags5744 Жыл бұрын
Nice. Thank you!
@swampdweller5
@swampdweller5 4 жыл бұрын
Thank you so much! Super helpful
@LegendPhase
@LegendPhase 2 жыл бұрын
Was really resourceful Video !
@SouthShoreSonics
@SouthShoreSonics 2 жыл бұрын
Great info.
@terrykorsmo3586
@terrykorsmo3586 8 ай бұрын
Thanks!
@kalpeshkpanchal
@kalpeshkpanchal 2 ай бұрын
Hi, so so so helpful video. Great explanation. You have got a new subscriber.
@kalpeshkpanchal
@kalpeshkpanchal 2 ай бұрын
So in short, volca cannot be set as master when trying to connect and sync with Roland boutiques or Aira , correct?
@Nu-trix
@Nu-trix 2 ай бұрын
@kalpeshkpanchal correct
@dirckxd
@dirckxd 4 жыл бұрын
The gate out on the boutique is not a clock out like you mentioned. It seems so since the programmed sequence in your example consists of 16th notes, but if you had some tied notes or rests in the sequence, the 'clock' would hang or shift on those points.
@Nu-trix
@Nu-trix 4 жыл бұрын
You are entirely right.
@zhipengyi5128
@zhipengyi5128 Жыл бұрын
thanks, very helpful
@w33dOr
@w33dOr 2 жыл бұрын
Great work 👍
@RaquelFoster
@RaquelFoster Жыл бұрын
To be specific, Volcas and Pocket Operators run at 2 PPQN (pulses per quarter note). Newer Volcas (2019+ like the Drum and Nubass) can be set to 4 PPQN in the global settings. Roland Boutiques run at 4 PPQN. If you hook them up to a 2 PPQN Volca they'll run at half speed. They also NEED a mono cable. They don't work at all if you use a stereo cable. Volcas work fine with stereo cables (tip = clock, ring = NC). The whole idea of using patch cables (1/4" or 3.5mm) for sync was a modular thing mostly intended to work with trigger outputs. So normally one pulse would be one step, and on a 16-step sequencer that's 4 pulses per quarter note. So it's odd that Volcas and POs use 2 PPQN. I can sync my JX-08 Boutique with a trigger out from my TR-606 going into EXT CLK IN, or with Volcas, or with my J-6. The Roland Aira Compact synths work fine with a stereo cable, and they let you set 1, 2, 3, 4, 6, 8, 12, or 24 PPQN in the settings. So you can use a them to double-clock or half-clock other things. For example, I can set my J-6 to 1 PPQN, then sync it with a PO-33 or Volca (2 PPQN) if I want the PO-33 / Volca to be clocked at half-speed and have 2-bar patterns. Some things use stereo sync cables and actually put a start/stop signal on the ring. I think the Behringer RD-8 and RD-9 are like that. They work fine with Volcas since the ring isn't connected anyway. And the RD-8 and RD-9 let you set a pretty wide range of PPQN clocks (not as many as the Roland Compacts, though). I actually never had any mono patch cables till I got the JX-08. I couldn't get it to sync with anything, but then I played with it with a multimeter trying to see what it was doing. It looks like the Boutiques detect that a patch cable is inserted the same way a Boss pedal detects that a cable is inserted - it grounds a circuit to the ring of a stereo input jack. EXT CLK IN has 3.3V on the ring. When you insert a mono cable, the jack's ring contact gets grounded to the sleeve. But if you insert a stereo cable it doesn't know because the ring/sleeve aren't connected.
@JamesVytas
@JamesVytas Жыл бұрын
Very useful.
@frankramrath8433
@frankramrath8433 4 жыл бұрын
Thank you. Much informative. I want to use an electribe to controll the 2 volcas and the microfreak (+ uno). So i think if i should use sync or better only midi.
@Nu-trix
@Nu-trix 4 жыл бұрын
MIDI Sync is more complete
@gerryk9
@gerryk9 2 жыл бұрын
Thank you thank you thank you!!!!
@ussrfeniks
@ussrfeniks Жыл бұрын
Thank Bro!
@BlakeDrummond
@BlakeDrummond 3 жыл бұрын
this is great- im having issues getting midi synch to work in logic...
@muhammadiq
@muhammadiq 4 жыл бұрын
Thanks Sir!
@kevinpackard3968
@kevinpackard3968 Жыл бұрын
This is making sense now. I managed to sync an Atari 8-bit computer (master) running Midi Music System software with a PO-33 and/or an NTS-1. The Atari outputs 24 pulses per quarter note from pin 3 on joystick port 2. An Arduino is used to count the pulses from the Atari and then sends out a pulse every 12 pulses to the slave. Everything seems to stay in sync until I stop sending MIDI signals using the escape key.
@enjenj6655
@enjenj6655 4 жыл бұрын
Very helpful... After looking at the OP-Z along with the optional ZM-1, could something like that drive your Volcas and Boutiques since it has CV out and Midi out (Midi via 3.5mm)?
@zazoomatt
@zazoomatt 4 жыл бұрын
So right Nu-Trix. Flux Capacitor's are a Triffle bit ouchy.........I hear You and thank YOU
@RzRipper
@RzRipper 4 жыл бұрын
Very interesting.
@Holiday_Ringo
@Holiday_Ringo 3 жыл бұрын
Ive been using a pocket operator to sync volca keys to a roland tr6s.
@djsweatysac1842
@djsweatysac1842 3 жыл бұрын
thanks for the video - I find this to be an annoying part of my setup.
@oskie66skye
@oskie66skye 4 жыл бұрын
THANKS A LOT,Sir Nu-Trix!
@chrismartin6690
@chrismartin6690 3 жыл бұрын
Really useful. Learnt alot did not realise that diff Manufacturers mange sync differently.... I want to sink Roland FA06 to My TR-08.. But cant see the settings in the manual for the TR-08 , Please help Thanks..
@jonnysterling6917
@jonnysterling6917 4 жыл бұрын
Great video!
@moonboy2022
@moonboy2022 3 жыл бұрын
To sync 3 devices would you do this... 'Clock Out -> Sync In -> Sync Out -> Sync In' and can I send midi to sync? Cheers for video is very helpful.
@Kim-on1ej
@Kim-on1ej 2 жыл бұрын
Thx
@midifilescom
@midifilescom 4 жыл бұрын
merci !
@Nu-trix
@Nu-trix 4 жыл бұрын
Avec plaisir!
@enelaoszafetas9300
@enelaoszafetas9300 Жыл бұрын
Watched that again and yes as people say this is very informative. Thank you for your great work! I am thinking to get a behringer td 3 and i am wondering if i can trigger it with the microfreak. The microfreak has cv/gate out and clock in/out and the td3 has sync in and filter in and im trying to understand if the td 3 can be triggered by the freak. Ideally i would like the output of the freak to be audio in at the td3 cause there is no space at my mixer..... Some say you can do that with the filter in of the td3 but its not official. Sorry for all that mess but its new territories for me. All the best from Greece and keep it up :)))
@MrGeoffashley
@MrGeoffashley 4 жыл бұрын
Thanks so much for the video!! Not sure if I was the one you mentioned asking the question..or if it’s that commonly asked...but thank you. Kinda bummed the Volca can’t trigger the Boutique. I use a Volca Mix which has a master tempo control...but I can’t hook up my Boutiques to it. I don’t have an SH-01a so I was unaware of it’s tempo knob on the front panel..I have a JU-06 and SE-02 and the tempo control isn’t as easy to work with than the Volcas. Oh, well. At least now I have a definitive answer that it really doesn’t work, and it’s not just me hooking it up wrong
@Nu-trix
@Nu-trix 4 жыл бұрын
You triggered the need to make the video. But it is a question I see almost everyday online!
@MrGeoffashley
@MrGeoffashley 4 жыл бұрын
“Triggered” the need...ahhhhhhhhhhhhh See what you did there Again...thank you for the definitive answer. I’ve been looking to invest in an MX-1 anyway for my Boutiques
@Nu-trix
@Nu-trix 4 жыл бұрын
See another idea for a video ... the mx-1.
@MrGeoffashley
@MrGeoffashley 4 жыл бұрын
I just received my JU-06a and I have a theory on the sync with the Volca Mix. What about a Korg SQ-1?? I saw a video from Perfect Circuit Audio with an SE-02, SQ-1, and a Volca Beats. The Volca Mix could clock the SQ-1 which could clock the SE-02 and JU-06a through ext clock in. Just a thought. I’ve been wanting an SQ-1 anyway for other gear
@seeditchmusic
@seeditchmusic Жыл бұрын
Much love Thank you 💐🌈❤️
@perrypelican9476
@perrypelican9476 4 жыл бұрын
FYI, nothing to do with this topic. Just to tell you that UVI just released Falcon 2 with crazy new stuff. I don't know if you have Falcon but if you do, this update to version 2 is free, which says a lot for the lack of greediness of UVI considering how huge this update is. I personally think their products are top quality. Great sounds. I tried most synths but I only ended up purchasing Falcon and Serum. Did you do a video on the new Massive X? Anyway I am curious about your opinion of the new Falcon 2. I don't have any hardware synths except for a tiny one I got to learn to connect midi out from my iconnectaudio4+. I really like the midi side of music making. It amazes me how much you can do with something as relatively simple as midi. I like to help people to set up midi systems. My favorite midi gadget is a powered midi hub. There are excellent ones and they almost guarantee no power issues amongst many connected devices and no need to disconnect one midi instrument or synth in order to use another because of power problems. Boy did I ever go off topic. I don't k ow if I gave your email address. That would make it easier than communicating by comments. Keep having fun as often as you can.
@RiccardoFranconi
@RiccardoFranconi Жыл бұрын
Nice video!!! I use tr-8s as master midi out go into midi in of a ju06a. Everythings works, but if during the playback I stop the sequencer from ju06a , when I restart the sequence is out of sync. Why? I didnt understand the reason. Thank yoy very much.
@alainszyller615
@alainszyller615 Жыл бұрын
Thank you for this clear explanation. I have a specific question; how to MIDI synch Alesis SR18 with Korg SQ1 (Korg SQ1 doesn't show up the bpm)
@Nu-trix
@Nu-trix Жыл бұрын
I’ll do a video about specific sync setup. Including this one. I’m guessing you want the SR18 to be sync master and the SQ1 to follow.
@alainszyller615
@alainszyller615 Жыл бұрын
@@Nu-trix correct , thank you so much
@TheGreatPanicker
@TheGreatPanicker 2 жыл бұрын
This is all new to me, but I have a volca bass I want to connect to my kaossilator pro and have them work together. How would I do that?
@Govwski
@Govwski 11 ай бұрын
I'm chaining an mbase 01 into the kick of my mfb, mbase plays though speakers but when everything is run into ableton the kick of the mbase won't play though, when plugged out the kick from the mfb plays into ableton. any ideas on how to fix this?
@tukushtacos2518
@tukushtacos2518 3 жыл бұрын
Doesn'tthe volca play in half .and 1/4 timing?
@albertocastillo7686
@albertocastillo7686 3 жыл бұрын
I'm trying to connect my tr-8 with my td-3 bass line.
@projectb3117
@projectb3117 Жыл бұрын
What device will be clocked with your daw when recording the seperate instruments?
@kimrobinson7692
@kimrobinson7692 2 жыл бұрын
Hi I love the way you explained it. What's confusing to me in the midi world of is what's the difference between a midi "sync" box a midi "thru" box? It sounds like a play on words, if they both send the exact same type and amount of midi messages between 2 devices. Based upon your knowledge and experience, is there a difference between the messages stemming from a midi "sync" box versus a midi "thru" box? Does a midi thru box allow midi messages through or thru? And does a midi sync box sync all messages or just a few? The difference between those 2 type of boxes is what confuses me. Do you know which one is better between the two: a midi sync box a midi thru box? (I really appreciate your insight, because you definitely explained things where it's easy to understand). I look foward to hear what's your take on sync versus thru. Thanks for sharing your insight.
@Nu-trix
@Nu-trix 2 жыл бұрын
In short: a MIDI THRU box simply copies the MIDI IN to multiples THRU to send the exact same message that was received at the input. A MIDI SYNC box would normally affect the sync messages (not the notes or the controls changes) it should be able to receive a certain type of a sync (that is not MIDI) and generate from that a MIDI sync message, or vice versa. A sync box will permit you to have to incompatible machine talk the sync (tempo, song locator, start, stop, etc…)
@kimrobinson7692
@kimrobinson7692 2 жыл бұрын
@@Nu-trix I was thinking to use a 1010 music black box to better sequence the sounds from a casio wk 7600 keyboard, and keeping the sounds from the casio, utilizing black box to build a song. In that situation is a sync better than midi thru? If I understand synce vs thru properly the way you explained it (please correct me if I'm wrong), in this case to keep the sounds from the casio keyboard but control it using a 1010 music black box would be better to use a midi sync box instead I think. Am I understanding that right? Thanks always
@rjadamz9117
@rjadamz9117 10 ай бұрын
Yes very thankful. Next question: WHAT IS MIDI thru?
@Nu-trix
@Nu-trix 10 ай бұрын
I can make that !
@kisho2679
@kisho2679 2 жыл бұрын
someone knows which modern alternatives exist to the "Redsound SoundBITE micro" to convert incoming audio to MIDI-clock, so to sync drum machines along with the playing audio (... and do live remixes during performance)?
@dannydaniel8975
@dannydaniel8975 Жыл бұрын
How do I sync my 8 track cassette recorder to Cubase?
@lummoxcruxband4955
@lummoxcruxband4955 4 ай бұрын
I have been given a Yamaha CS2X synthesizer from the 90s and a Yamaha RX15 drum machine from the 80s and am curious about how they can sync with each other...what device can do what with the other?
@tcalzuolo
@tcalzuolo 3 жыл бұрын
Great video. I think i have the ultimate question. I just bought an Akai APC mini to cue music in OBS for shows. I want to assign for example 5 triggers (music tracks) to the same volume slider but cannot seem to figure this out. Thanking you in advance for any suggestions. Keep up the great work.
@Nu-trix
@Nu-trix 3 жыл бұрын
A MIDI volume is link to a specific MIDI channel. If you want one MIDI fader to control the volume of 5 sounds, they should be on the same MIDI channel.
@tcalzuolo
@tcalzuolo 3 жыл бұрын
@@Nu-trix I've tried but I get a message saying the channel has already been assigned. ill keep trying. thank you for responding.
@Nu-trix
@Nu-trix 3 жыл бұрын
Have you tried to use only one channel in OBS and put all the triggers on the same channel in the APC?
@tcalzuolo
@tcalzuolo 3 жыл бұрын
Im not sure when you say one channel in OBS. Please excuse me if I'm not understanding. I try to explain it a bit more in detail. I am using the midi set up in OBS on my Mac. I am using the APC mini. I have 8 rows with 7 triggers and one volume slider below each of them. I have separate tracks assigned to each trigger that turn on and off just fine. I can assign one track to the volume slider but when I attempt to assign more than one I get a message that says" Can Not Map Channel 0. Please Click Listen One Or Listen Many to listen for MIDI Event to map". after clicking OK I then get another message that says" Mapping already Exists for APC MINI, with channel # 1 norc # 51 and Message type Control Change. I hope I'm answering you question. thanks again for your help on this.
@djkidbrooklyn
@djkidbrooklyn 3 жыл бұрын
Well I'm having trouble I have a Roland dj 202 and a kaossalater pro and hooked up a midi cable and it won't sync won't even acknowledge it
@kurthendrix7324
@kurthendrix7324 3 жыл бұрын
Wow, you just explained that perfectly. It helped thanks. Do you do private tutoring ?
@Nu-trix
@Nu-trix 3 жыл бұрын
Yes, just need to schedule a date and time.
@kurthendrix7324
@kurthendrix7324 3 жыл бұрын
@@Nu-trix, how do I do that? Also, do you use,zoom or any other platform ? And price ? What platform to pay?
@Nu-trix
@Nu-trix 3 жыл бұрын
Write to me at info@nu-trix.com.
@crey3361
@crey3361 Жыл бұрын
But if i connect two behringers analog it should work right?
@Nu-trix
@Nu-trix Жыл бұрын
With the right connection and parameters it should.
@elevan2760
@elevan2760 2 жыл бұрын
Great video mate. Do you have any additional information on how to set external gear to a daw? Cheers
@Nu-trix
@Nu-trix 2 жыл бұрын
What would you like to know?
@elevan2760
@elevan2760 2 жыл бұрын
@@Nu-trix I meant to write sync.. How you can sync external synths to your daw so they essentially act as plugins in the box I.e. Start, stop and continue with your daw so you can write music accordingly
MIDI sync - How to know if 2 devices can be synced? - Answering your questions
16:31
The dangers of MIDI FeedBack - THRU and Local control
13:41
Nu-Trix The Synth Guy
Рет қаралды 10 М.
Cool Items! New Gadgets, Smart Appliances 🌟 By 123 GO! House
00:18
123 GO! HOUSE
Рет қаралды 17 МЛН
Amazing weight loss transformation !! 😱😱
00:24
Tibo InShape
Рет қаралды 59 МЛН
39kgのガリガリが踊る絵文字ダンス/39kg boney emoji dance#dance #ダンス #にんげんっていいな
00:16
💀Skeleton Ninja🥷【にんげんっていいなチャンネル】
Рет қаралды 8 МЛН
Как бесплатно замутить iphone 15 pro max
00:59
ЖЕЛЕЗНЫЙ КОРОЛЬ
Рет қаралды 7 МЛН
Cerrone on how disco classic ‘Supernature’ was made
6:40
180 Fact
Рет қаралды 232 М.
How to Sync your Synthesizer Setup using MIDI
3:46
JAde Wii
Рет қаралды 188 М.
Reel to reel tape recording and SMPTE timecode | How did it work?
24:08
How to sync a Behringer RD-8 and MS-101/ MS-1 (updated)
10:55
Molten Music Technology
Рет қаралды 33 М.
How to setup tr-8S trigger out for multisequencing
17:10
Nu-Trix The Synth Guy
Рет қаралды 36 М.
MIDI Primer for DAWLESS - The MIDI implementation Chart
38:00
Nu-Trix The Synth Guy
Рет қаралды 11 М.
MIDI Clock and your DAW: How To Sync Your Synths
9:14
Scott's Synth Stuff
Рет қаралды 50 М.
MIDI In, Out, and Thru | What's the Difference? - Daniel Fisher
8:33
The Elektron MIDI Syncing Guide
7:55
EZBOT
Рет қаралды 10 М.
V $ X V PRiNCE, Shulamah - Jai Jatpaimyz (2024)
2:38
Студия СОЮЗ
Рет қаралды 89 М.
LISA - ROCKSTAR (Official Music Video)
2:48
LLOUD Official
Рет қаралды 132 МЛН
Әбдіжаппар Әлқожа - Ұмыт деме
3:58
Әбдіжаппар Әлқожа
Рет қаралды 969 М.
Taxi
3:06
Sadraddin - Topic
Рет қаралды 94 М.
Duman - мен болмасам кім? (Mood Video)
2:35
Duman Marat
Рет қаралды 101 М.
Malohat
3:35
Xamdam Sobirov - Topic
Рет қаралды 1,2 МЛН