How To Tap a Oil Pan | No Weld Fitting

[@Airman..]

Indeed, this is a better solution than welding which can wrap the thin metal easily

[@officialworstmechanic]

absolutely brilliant! Thank you!

[@boosted_donkey]

I scuff up the area where the plastic seals go and put jb weld on them and the threads and tighten.

[@originalgeneralluisolivo1675]

I Installed an O ring on My Fitting. Would it still keep oil from leaking out of the pan? Thank You

[@donny_lude2083]

Great tip live the video however wouldnt the location of that inside nut interfer with any moving pieces such as the crank?

[@mplvt]

Crank does not go into the pan, everything that moves is above the windage tray

[@donny_lude2083]

@@mplvt ahhh okie

[@rodrigoalvarez8662]

thank you for tips!!!!

[@jakefoster4756]

That leaked for sure!

[@neruashikabi2409]

will this work if I done two holes n applied two elbow joints n than attached two pipes running to the height of engine n topping off with an mini air breather on each to vent engine instead of having a pcv valve? not including the breathers on valve covers

[@Marcarlar]

I have the same black AN fitting with the white Teflon seals. What size drill bit hole maker is that?

[@moe4204]

I plan on ordering a turbo kit off eBay for my civic do you know if it comes with the bung? I didn’t see anything about it coming with it so I doubt it will can I use this same bung to tap the oil pan?

[@steveabner]

Can you do the same to the valve cover for catch can lines? I'm assuming so.

[@sethchurchvid]

Valve covers have baffles that prevent this from working well

[@alundrasrt]

Chemicals with oil will attack teflon. You can use a proper oil crush seal gaskets.

[@JankyMaddGamerr]

Where u located bro I need minor help with my boosted f22a1

[@sethchurchvid]

Lenoir NC

[@richardcoleman9645]

Thats right under the motor mount. Gonna be a pain to get to.

[@seantowingandrecoverytowin2504]

Is this safe on turbo ?

[@chief470]

Not the best way but works

[@isaachunnids]

🔥🔥

[@agustinherrera8984]

By any chance do u have the link to the an fitting can’t find them

[@sethchurchvid]

Yes; EVIL ENERGY 10AN To 10AN Male Flare Straight Fuel Cell Bulkhead Fittings Aluminum www.amazon.com/dp/B0895PD384/ref=cm_sw_r_cp_api_glt_fabc_X1H7HST0447JKVHZJ7E5 🥳🥳🥳🥳🥳

[@FaderSkate]

Mines is leaking where the metal braid is coming out of bong do you think it could be bad bong or bad cracked weld?

[@sethchurchvid]

Might be able to take it apart and check hose or just replace it

[@solangus7730]

Can U do turbo line without remove sump,I know U don't want shit in your sump but is there way do,,that puts hours on my build

[@ieatass6463]

Lol that was a stupid question. NO

[@rapbri9937]

You forgot thread blocker

[@Spencerjones_music3]

Let's hope it don't fall of ,cuz ur engine be fked

[@sethchurchvid]

It works well. Some lock tight and it’s never moved.

[@ronbondie9502]

nice shirt fnuts.... jk from mi.

[@Fa5_4_lyfe]

I’ve heard bad things about these is it better to just have a welded on

[@jraddd3477]

everything welded is better lol