how to test fiber optic cable with otdr | exfo otdr fiber testing..

Рет қаралды 28,713

JURVideos

Күн бұрын

Пікірлер: 22

@sherazkhanjadoon8560 Жыл бұрын

MASHALLAH Zbrdst ♥️♥️♥️♥️

@sagheerahmed9932 3 жыл бұрын

good information sheer with public

@VIKASHRAJ-lv5dj 2 жыл бұрын

Very useful video Thank you dear

@milindrajbharti3596 Жыл бұрын

Very good nice sir Sar file se karne ke liye alag se video banaaiye

@shahidinamdarr 3 жыл бұрын

Very informative video brother i am also working in STC 👍

@abdulrehmankhan7036 3 жыл бұрын

Brother, How to apply in stc company as optical fiber technician ...kindly may u inform me about it!

@raisjaveed173 Жыл бұрын

Nice

@ashfaqahmad5509 4 жыл бұрын

Great sir 👍 Color codings..ka be banolo na Moji coding ka pta nahi problem hain tora

@jawadsatti2422 3 жыл бұрын

Bleo. Orng, geren, baron salat, wahit, red, block, yellow, voilat, pink, akwaa

@baljindersandhu5667 3 жыл бұрын

Very very Good Sir

@abdulrehmankhan7036 3 жыл бұрын

Optical fiber cable testing: Optical fiber cable testing with the otdr / (exfo otdr) (Ias sa ham cable ka fault find kar skta ha ka kitna distance pa wire ma fault a rha ha iasy fault locator be kah skta ha) Measurements: Range(km)! Pulse! Pulse ratings: (3ns, 5ns, 10ns-standard, 30ns, 50ns, 100ns, 275ns, 500ns) & (1μs, 2.5μs, 5μs, 10μs, 20μs) μ=10^-6 Duration(sec)! How to use: First go to (Identification) option. Then notice on (Location-A, Starting point, FDT). Then notice on (Location-B, Final ending Point,HIJR). Then notice on (Fiber ID). Number of fiber line to concerns. Then notice on (Direction, A->B, B->A). Then click (Okay). Then move on the (Range) option, lets spouse (10-km). Then move on (Pulse) option set value lets spouse (10sec) same as (Range-km) value. Then after set (Duration) time frame move on (Port/Fiber: Frequency- 1310nm-1550nm) Note: "Same (Range & Pulse value) for the accurate result". Then set duration lets spouse (13sec). Then move on (Test configration-wavelength) wavelength: Splice loss: (0.100dB). Connector loss: (0.250dB). Reflectance: (-40.0dB). Fiber section attenuation: (0.300dB/km). Span loss: (20.000dB). Then click (Okay). Then move on (User profile), Note: This option use for save all these fuction in this system in any specific folder. Now finally after save this setting we will (Trace) according to our setting. And finally now complete the (Identification), (Test configration). Note: All of these setting are must otherwise we dont know in the future where is our tracing file details. Finally now click on the (Start) option. Normal total loss: (2.4dB)