Рет қаралды 76,361
I'll show you how to tie tomatoes in open ground so that the bushes don't bend.
There are several options for gartering tomato bushes. The choice of mounting option depends on the variety, height of the adult bush and yield. I have planted tomatoes of the Skazka variety. Before gartering, it is advisable to pinch the tomato bushes. The stepsons are removed with a sharp object or fingers, leaving a small stump. I will show you 3 ways to garter a tomato:
1. Tie to a separate support.
As supports, you can use wooden stakes of approximately the same length, metal or plastic pipes and thick rods. They are installed next to each bush and must correspond to its height. A strip of fabric is wrapped around the stem and secured to a support.
For seedlings of low-growing and medium-growing tomatoes, the stakes should be 25-30 cm higher than the bushes, and tall varieties need supports 2-2.5 m high. Each peg is buried to a depth of 20-25 cm, and it should be 10-10 cm away from the trunk. 15 cm so as not to damage the root system. Do not pull the garter material too tightly so that it does not pinch the stem.
2. Horizontal trellis.
Tying tomatoes to a horizontal trellis allows you to tie up the plants as they grow. To organize it, you also need to dig stakes into the ground. But there are also differences from the previous method: the twine is stretched between them. In this case, the tomato stems are “passed” between several strands of twine.
3. Vertical trellis.
This method of gartering tomatoes is indicated if the vegetables are grown in a greenhouse. Its principle is that the plants are tied to the ceiling of the greenhouse, and as the bushes grow, they are “pulled up,” which helps protect the tomatoes from injury. In addition, this is a convenient way to garter tomatoes if there is not too much space on the site.
4. Mesh, wire fences.
To create the necessary structure, you will need two-meter nets, which should be stretched between the rows of tomatoes. The stems are tied to the net with twine, which ensures their secure fastening. The convenience of the design is that as they grow, the tomato bushes can be untied from one level of the grid and tied to a higher one. In addition, there is no need to drive stakes for each individual bush - several plants can be tied to one net at once.
▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰
Video sections (chapters):
0:00 Introduction
0:15 Tomato bushes bend to the ground
0:29 Necessary tools and materials
1:00 Pinching tomato bushes
1:43 How to tie up tomato bushes (1 method)
2:05 Methods of attaching bushes to a support
4:27 How to tie up tomato bushes (method 2)
7:18 How to tie up tomato bushes (method 3)
8:55 Conclusion
▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰
And in this video I will show you How to tie cucumbers in a greenhouse • Как подвязывать огурцы...
▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰
Subscribe to our channel and watch videos on this topic #tomatoes, #tomatogarterintheoutdoors, #tomatogarter, #garden.
▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰
Our social media channel following the links:
Facebook - / 1147375328749226
Odnoklassniki - ok.ru/delomasteraboitsa
VKontakte - club141674316
Instagram - delo__maste...
▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰
Thank you very much for your support friends 💕