How to Tone stain Cabinets without removing the old finish!

[@davemurphy5645]

Love this stuff. Just wondering what degreaser or cleaner are you cleaning contaminants off with before sanding? Thank you.

[@almaf5687]

Thank you so much for this tutorial! It was very informative!

[@trentendsley3355]

In a refinishing situation that calls for toning, are you adding colorants to a stain base and catalyzing the stain base for adhesion or do you recommend adding colorants to a product like the 851 with catalyst for adhesion when toning?

[@jamesmcconnon2]

Nice man. Top work.

[@kyleprice6624]

I’m about to start a new home with raw pine windows trying to avoid staining and whipping it off and just spray in a coat or two of toned clear to get the desired color could I take the route in this video? Appreciate the info

[@bradouellette6558]

Great videos , I have an Apollo HVLP and am looking for a mini spray gun with a 4-6 oz cup that I can use compressed air with for very small items that I can knock out without pulling out the Apollo , can you recommend any manufacturers ?

[@112wade]

Great video tutorial Louis. In the initial sanding with the SurfPrep, do you reduce the speed to help in not blowing through the finish coat?

[@customrefinishingSTL]

Don't have your heavy handed laborer do it. This is purely finesse! Practice on a test piece.

[@macmilleur4165]

Does that surfprep leave pigtails in the surface?

[@chudchewer2548]

@@macmilleur4165 it can if you press or use the wrong grit

[@jasonc2252]

So you are spraying your stain base directly onto your pre finished door, or is this using a clear coat base with your stain mixed in?

[@finefinishsupply]

Diluted Clear as a binder with spray stain colorants mixed in.

[@rexjames6830]

Your the man.

[@genosciacca1816]

Go to primer for stained oak?

[@jimprisby5463]

Great video. I toned some kitchen cabinets 5-6 years ago, new to toning at that time and have chips/nicks, probably from customer and probably from not the best prep on my end too. I would love to see if there's a way to redo and/or change the finish. This may look like a possible solution. Cabinets started out similar to the golden oak you had. Any thoughts?

[@mikerichter1694]

Do you apply a barrier coat over the toner, before glazing?

[@finefinishsupply]

Typically I do not.