How To Trim Your Boat (Basics Of Boat Trim & Tilt) 2020 Edition

[@trusteniola6159]

This video really helped me understand the basics of trimming, thank you!

[@josephtaylor3857]

Best explanation of trim/tilt I have seen. Thanks for that!

[@mariterbrueggen2140]

Good information well illustrated helped enormously

[@bresendes929]

We need more quality boats videos like this! This helped a ton!

[@williegalloway9080]

Thank you Sir, I'm a new boat owner. Your video was spectacular!!! Now I have full confidence to take my boat out for the very first time.

[@A.B.-zs8ir]

Thank you for the great vlog, you taught me 5 mins what some ppl haven't learned in years! just got urself a sub :-)

[@alfiore1]

Watched many boat videos how to adjust motor trim....and I never thought I understood it right. wow 😳 wow wow...this video is the standard to understand and learn how the motor trim works and use it. Short and full of information. And this will be my standard of video on boating.... WELL DONE 👍!!!

[@gatgolf]

Porpoising is usually caused by trimming up too much, NOT leaving it trimmed down.

[@DYNABIKE1]

Very well done. Covered all aspects so all can understand !

[@TheTimKrul]

Been looking for this explanation new boater here in Naples and was wondering how to stop from getting bounced from others wake thank you very much

[@BoatHouseH2o]

Welcome to boating! Glad we could help sir! Feel free to reach out if you have any questions. We have a dealership in Naples right off of Davis Blvd. Stop in sometime! Have a great day.

[@funtimess2995]

You made by day! great video!

[@jeffa7530]

Great video! Are there anymore tutorial videos by this master teacher?

[@keenanmoore264]

Incredibly helpful video. Thank you.

[@BoatHouseH2o]

Glad this could help you out! Have a great day sir. 🤙

[@MikeFrenchParis]

Great video thank you

[@AwesomeFuture777]

That was a very helpful video for me a first time boat owner. I have a 1990 Phantom 160 with an OMC Cobra 2.3l 1989 motor and 1990 outdrive... a little mix there at some point I guess. Hopefully that's good though. It has skeg protector and what looks to be a hydrofoil set above. When we got the boat, it had some problems which we were able to overcome. When they finally got it on plane it would die, etc... discovered the timing was 7 degrees out and dwell was off. Put new plugs in and reset dwell with the points and even replaced the electric fuel pump because the mechanical one was toast. It was a work in progress but the first time we took it out in the back waters of lake Superior, we ran aground at 26 mph. Scared the heck out of us. Luckily the skeg protector kept from any damage below on the outdrive, but the belly got scraped up some. We are still unable to get above 26 mph and when we do hit that speed we encounter the bounce you mentioned. I didn't know to trim the outdrive up once you are on plane. I will definitely trim up to 1/4 trim next time we go out! Thanks so much for your helpful video!

[@boballison123123]

Excellent!! Well explained. Thanks!

[@nomadnomad8571]

Thanks. Very helpful. 👍

[@BoatHouseH2o]

Thank you Nomad!

[@rdtaguestudios]

Very well explained! 👍👍

[@AZeno1955]

The same thing happened to us once when the Maelstrom opened in Epcot. The evac process was almost as cool as the ride, we got to see parts of the ride and Epcot few get to see.

[@johnd.jr.5508]

Simple efficient explanation! Thank you.

[@BoatHouseH2o]

Thanks for the kind words sir. Have a great day!

[@SangLe-ju8br]

Thank you for the lesson👍

[@BoatHouseH2o]

Of Course Sang Le! Have a great day!

[@joeestradajr5139]

Great info, thank you for doing the video.

[@BoatHouseH2o]

Glad it was helpful!

[@samossurfphotography6163]

Great advice spoken in clear detail 👍

[@BoatHouseH2o]

Thanks for the comment! Have a great day!

[@evanbarnett8846]

Excellent explanation

[@j4cline]

Best explanation I have ever heard.

[@hizzleman4111]

Very well explained, Thanks.

[@karlomarkovic3278]

I’ve been boating 12 years now never heard this rule been wanting to know this since I’ve bought my 26ft

[@leonardtaylor7976]

Great video

[@BoatHouseH2o]

Thank you Leonard! Feel free to subscribe to our channel for more content like this!

[@1973superdad]

great content, thanks for this, Ive always had jets, this helped me a lot

[@karlomarkovic3278]

We need more from ya bud

[@wilsonlavelua9337]

appreciate the vid man! great tips!

[@BoatHouseH2o]

Thanks Wilson! Have a great day sir!

[@joseluisblanco6287]

Wow Thank you for that info....

[@wwa9925]

Awesome, thank you!

[@chuckcurtin]

Great explanation, Now how about one on Jackplates?

[@BoatHouseH2o]

Thank you! I will reach out to the team and get one produced!

[@jacobazoulay1916]

well explained thanks

[@BoatHouseH2o]

Glad it helped! If you have any questions let us know.

[@jarrodhill9149]

Thanks 👍👍

[@boostedlsjuan5307]

Thanks Tim, good explanation

[@enriquegonzales4433]

Does anyone knows if there is a warning sound if your trim is incorrect?

[@4your.837]

Whell done, thank you for sharing. Regards

[@chrishorstman1]

Nice job Tim.

[@coldfire2812]

great video

[@BoatHouseH2o]

Glad you enjoyed it! Thank you for tuning in!

[@evanbarnett8846]

Great video....thanks

[@georgesaraamonette1782]

Tim, great video/job. Just got an used Tri toon with no trim gauge so I was guessing on the trim positions. What about storing the motor, full trim up with lock in if sitting in the water (currently no lift setup), and same in the driveway or down to let all water drain out or any rain?

[@Bward216]

For modern 4 strokes you don't want to store them trimmed up. This does not allow the oil to drain and when you start back up you will experience white smoke burning off that oil

[@brianloughnane781]

Than you!

[@ToolManTaylor]

My boat falls to one side when on plane. Is this from improper trim or engine height. I have moved weight around in the boat but boat always seems to lean left or right once planed. Any thoughts?

[@BoatHouseH2o]

This may be due to improper weight displacement or one of the trim tabs being positioned differently than the other. I'd make sure you have all of your gear on the boat placed decently and then try and adjust your tabs in a safe manner next time you are out!

[@ToolManTaylor]

thanks for the reply I have moved weight around. Boat has no trim tabs. I modified the transom and remounted the engine. Take a look at my changes here. Do you think that moving the engine in could effect the stability. Boat seems to fall to one side or other won't run level on plane. kzbin.info/www/bejne/hHKyi6ymf8-Unsk

[@AwesomeFuture777]

@@ToolManTaylor very nice boat and great use of space! Not sure where in the video you spoke of the boat tilting to one side when on plane however. Maybe it was in a different video?

[@Elfinbrownie]

In what situations would you want to trim up more than average? people riding on the bow? rough waters?

[@BoatHouseH2o]

Yes, typically you would go higher depending on amount of passengers in the boat. If you trim too high, you may encounter “porpoise effect”. That is where the bow will slightly bounce up and down. Just trim back down about 1 second or until bouncing goes away. If too high, you will get higher RPMs as well and start loosing speed. It will be an obvious situation and easily fixable by trimming back down a little. Hope this helps! Tim

[@GetOutTheHouseGoFish]

Great info; explained it very well 👍 Thank you 😊 #Getoutthehousegofish

[@lawrencelopez7131]

Tim can trim. Thanks tim

[@wingmanmoore87]

Noice!