How To Turbocharge Your Arrma Felony

[@DriftomaniacsRC]

Get Your Very Own Arrma Felony Right here - bit.ly/3gw1RI4

[@bradd145]

The tube is for the gray intercooler that goes on the very front. The tube goes through the extra holes next to the fog light pods. The intercooler goes at the bottom of the front bumper and covers the intercooler sticker.

[@rc.attucks]

Got my Felony last week. You give one of the best how to, step by step, RC videos on the Tube. Thank you sir!

[@luisuchiha2527]

The grey intercooler goes on the front splitter right in front of radiator looking sticker its just there to be a more 3d version of the intercooler which out of the box is a sticker so on the chassis on the front splitter u will see some dips in the lexan on where it mounts

[@DronemanJoeRc]

yeah I see what your saying and you would need to cut that hose and put it in the ends and then drill some holes in the front to fit the hose threw after you put the hose in the ends of that piece. but they dont give you screws to screw it in the back to the piece, so im going to leave that off for the moment. thanks for that great share.

[@drivenrc]

Mine came with holes but are completely off line

[@fbrd_bacon407]

I’ve been looking for a cheap rc car for about a month and I can’t afford any. If you have any cars that you have and working ones that you trashed or any car you just don’t want and is in your way I’d be glad to take anything off your hands for you.😁😁😁

[@destruxandexploze2552]

“Give me free stuff”

[@fabriziodaurizio1009]

Intercooler fits on the front scoop in front of the intercollegiate sticker. There are 2 dimples where you drill holes

[@bhavick10]

Yea the pipe is for intercooler and turbo intake manifold. You can drill holes in the body hood to let the tubes feed down and then just cut and throw a dab of glue so the tubes stay. And then same with intercooler. Drill the holes by the fogs and run the tube through and touch of glue.

[@paintballguru13]

The piece in the back with the 2 screw holes is possibly for putting 2 titanium screws in to shoot sparks

[@dauntlessfpv]

Yes

[@Fyxxterzc]

Or a long wheelie bar for drag racers?

[@DriftomaniacsRC]

I was wondering that! I've some titanium screws I run in my infraction, I may swop the insert out and try them

[@bobbysimpson5540]

Thank you Thank You. Just picked up Felony yesterday and could only figure out about 1/2 these parts.

[@DirtSailor5]

Great video, I wish there were more of them. Any update on installing of the seemingly random bits? The plenum/intake manifold (grey piece with 2 knobs) goes with the 2 knobs forward and 2 cut pieces of tube are attached and angled through the hood. Think Ken Block Hoonicorn v2 the tubes are intakes from the turbo . I've seen some bad pictures of them but I just can't get the damn things right. The flat oval with the two circles and 1 screw is a quick fill fuel port. Like the ones on race cars. The raised up exhaust looks to be a through body exhaust. The kind where the pipes run under the chassis and exit through a hole cut in the side of the body. It looks poorly executed though. I imagine you cut an oval through the body and the front and back pieces kinda sandwich the body but I don't know. The long intercooler screws into the chassis just below the grill with cut pieces of tubes on both sides entering the body. I have absolutely no clue about the rubber grommety short piece or the diffuser pieces. This whole thing absolutely bugs the hell out of me.

[@rgzrc3056]

Where did u find pics of the tubing running from the two knobs into the hood that’s my issue as well lol

[@DirtSailor5]

@@rgzrc3056 Sorry about the delay, I tried to respond when you sent the request but for some reason I wasn't able to respond and then I forgot about it. I was watching some more videos and just remembered. If you look at the official felony video where they play a song that starts out with starts with "I make the devil run, I give him poison just for fun". In the first 10 seconds of the video as soon as the felony 6s blah blah blah logo disappears press pause. When the logo is up it's covering up the picture but once the logos gone you get a good shot of how they have it.

[@Genxpoppy]

One black piece is for side exhaust for turbos

[@fabriziodaurizio1009]

Thst thingy is called a plenum chamber. And the hose is your intake hose work

[@peterhino6433]

Thanks I didn't know were those parts went 🖒

[@michaelsherman1018]

I believe the grey arrma piece is an external intercooler that fits on chassis...not exactly sure.

[@DriftomaniacsRC]

noted. Others say this but WHERE on the chassis? Inside the body? NO instructions in the manual

[@sheliabryant1911]

I laughed so hard on the intercooler,....the sticker of it is on the lower front diffuser.(i.e location+holes for tubing)its a real piece to add scale looks to felony.the tubing goes on arrma turbo intake,intercooler and turbos, if you know how. And you had the turbo intercooler backwards.

[@aidendavis3086]

2 years later has the felony still got the same esc problem ?

[@jasonbudd2950Jag]

Thanks for Sharing this Jigsaw puzzle Rich.. Top Man..👍

[@DriftomaniacsRC]

No problem 👍

[@DriftomaniacsRC]

People say it's obvious BUT open the manual and sorry it's not! Two screws BUT no instruction on all of the other parts, some saying it's obvious but none of those people videoing it......

[@jasonbudd2950Jag]

@@DriftomaniacsRC My Felony is on backorder. This video will help, if I need to view this again at a later date. Arrma manuals are very vague, if I get stuck, I either try to find instructional video, look on Forums or just try work it out myself, removing parts, taking Lots of pictures etc... When I was a kid all RC's were Kits & manuals were Very Comprehensive, also cus you built Car you then knew it inside out when completed. Just because majority of RC's are RTR now, all manufacturers should still provide Comprehensive manuals for assembly & disassembly of every part of the RC in my opinion... It would save a lot of headaches. Have a good day buddy. 👍

[@raymondwilson9662]

Does anyone know what the rubber cone is for that’s the only thing I can’t figure out what it’s for

[@TheRyaninspokane]

Thanks for explaining all the add ons

[@Genxpoppy]

Airbox aluminum for building pressure for turbos no leaks

[@chrisholt3105]

The blank plate that fits in the same space as your center diffuser fin....I think it’s for attaching a drag bar.

[@DronemanJoeRc]

Im so glad to have found your channel I just got this bad boy and I was wondering what some of those things were for!! Thank you thank you.

[@DriftomaniacsRC]

Glad I could help!

[@Aussieknuckleheads]

The arrma intro vid shows the different pieces installed Richie 😉

[@DriftomaniacsRC]

not a problem, do they show it how to do it step by step? nor does the manual......I rest my case :-) All feedback Much appreciated

[@TheRyaninspokane]

Do the small black pieces attach to the bottom door two hole peice?

[@mattw1957]

Number 1 baby!!!

[@johnsdad092009]

Richie i believe the Holley carbs look more like hillborn injection or the 4 weber carb set im not aware that holley ever made that style of carb ever. Also the tube and other part is a turbo inter cooler.

[@Genxpoppy]

Put airbox on for turbos with two pieces of black tube.

[@ba.skidderLOCKDOWN]

I just brought one of these

[@fabriziodaurizio1009]

The plenum is for the turbos

[@pricerc4681]

My kit didnt come with the screws,what size screws and how many,thanks

[@DriftomaniacsRC]

you'd need to contact arrma as I am not sure, apologies

[@Genxpoppy]

Intercooler front on splitter

[@ineedfiles]

I found the video where they show where to put the rubber hoses. It’s the “official” ARRMA Felony video

[@MakingDirtFly]

Can you buy the supercharger and stuff aftermarket? I want to fit it to my slash, and see if it looks any different than the rpm one you can see in my profile.

[@dimwitrj]

Yes it's $25 and part # is ARA480040.

[@MakingDirtFly]

@@dimwitrj Thanks

[@dimwitrj]

@@MakingDirtFly No problem.

[@007nubber]

You know those 4 green lights on the controler do they work with all batteries or only spektrum smart batteries?

[@Shane9905]

Just the Spectrum Smart Batteries.

[@brandontravers1606]

If you look closely to the front bumper you will notice two indents holes , these holes align with that gray piece also if you look beneath the edge of the front bumper again you will find holes that align with that gray piece !!

[@brandontravers1606]

You will also find these holes in the same place on the gray piece

[@Genxpoppy]

Put the turbo airbox on man and tubing

[@burn1gotbeats]

What is that mysterious black tubing does anyone know lol?

[@The8429]

I think the rubber hose is a snorkel

[@MrThethomas360]

I can’t seen I’ve ever seen a muscle car with a snorkel

[@fabriziodaurizio1009]

Nope. Plenum chamber goes other way and hose goes on the w bits that stick out

[@DjGlenJon]

#FREEPARTYISNOTACRIME

[@xch3no2]

Hilborn injection not "hollycarbs?" would be the induction represented the velocity-stacks, whether electronic or mechanical, carbs just can't hang with injection. And We don't use carbs on performance vehicles in this millennia.

[@Genxpoppy]

Turbo airbox no leaks

[@MrUnpredictable05]

It goes on the chassis, the intercooler

[@DriftomaniacsRC]

where? Please shoot a video! No instructions in the manual and no offence lots of armma chair critiques happy to say where it mounts BUT not show any of us HOW it mounts? Flat part? V shaped front!

[@MrUnpredictable05]

I saw it on a KZbin video myself, they reemed two holes one on each side of the intercooler Sticker, trimmed the rubber tubing put a piece on each side and stuck it right in the chassis in front of the sticker

[@megabike67]

The long grey part is the intercooler for the twin turbocharger set up

[@DriftomaniacsRC]

BUT WHERE DO YOU FIT IT TO THE CAR??????

[@tropicthunderbolt]

Across the bottom grill. On the outside those 2 smaller holes on the inside of the bogger ones is where the hoses would normally go to. So u have to cut two small pieces with angles so it looks like it's actually going in. From both sides of the intercooler

[@ivanw7457]

@@DriftomaniacsRC Richie, check my Felony out. I have the grey intercooler fitted on the front. There are holes that match up on the car. Then just follow tropicthunderolt instructions for the hose placement. I put lights there instead.

[@VetteWay2Fast]

Love the channel, great vids! I believe the bigger accessory is a blower, not a supercharger. Super chargers are internal whereas blowers mount onto the manifold like the included accessory. The long plastic piece mounts to the chassis front wing area over the sticker that’s says Arrma. The black tube goes into those large headlight looking things to the side of it. The piece with tube nipples goes forward and the tubes attach and run into the body if u were to ream out holes to go thru. Hope that made sense lol

[@pipeslayer4603]

T⁹

[@ianmacleod5284]

^ maybe on a corvette. A blower is a supercharger it is the same thing. Can be mounted under hood or out of hood.same for turbos.

[@Genxpoppy]

Intercooler

[@georgefrejsjorc1033]

There are pictures of how to mount the plastic hose and the two gray pieces the long one are turbo coolers.

[@DriftomaniacsRC]

not the super charger coolers? Just the turbo coolers?

[@MatrixRC]

Tube routes behind the front splitter where the fog lights go to connect to intercooler. Check my channel out and look at my Felony 6S.

[@DriftomaniacsRC]

I will do but the it's flat.The front end of the felony has a V in it, my infraction is flat at the frony my felony is not....Do shoot a video on your channel showing how to fit a flat radiator to a V shaped car......

[@rippertrain]

The thumbnail looks like a supercharget not a turbo charger but i dont know anything about cars

[@DriftomaniacsRC]

turbo on the left! Supercharger on the right!

[@rippertrain]

@@DriftomaniacsRC ty

[@LOLRC]

Before making a video like this, you should probably do a bit more research. Just sayin.. :)

[@DriftomaniacsRC]

on what?

[@LOLRC]

@@DriftomaniacsRC The placement of the intercooler was off, its a Gearbox Style Insert in the back, The exhaust system that goes on the side, the black tubing is for making custom hosing for intercooler and engine options mounted backwards. Nonetheless, I like your vids, stay strong Richie :)

[@jeffro5180]

Clearly tell this guy knows shit about cars lol

[@jomjose3121]

Maybe next time do a bit of research before the video. All the Arrma videos have shown how these are mounted on the cars and where especially the inter cooler in the front and how the tubing has been used for scale realism. People are so used to getting RTR out the box that they have forgotten that the hobby is also about using your own creativity and imagination to make what works best for you.

[@DriftomaniacsRC]

so EVERY arrma video shows how to put these on? interesting.....

[@daddyofla]

IT GOES UNDER THE GRILL IN FRONT../ DAVE