VIDEO: Ford 6000 CD Stereo: Get Serial Number For Unlock Code - kzbin.info/www/bejne/maTPaqeffaeho5o
@rdt1882 Жыл бұрын
Didn't realise there were so many ways to clear a blocked washer nozzle. Good fixes for those annoying times when the jets either don't work at all or spray in the wrong direction. Thanks for heads-up.
@CarSpyTV Жыл бұрын
No problem, RDT.
@jasonhappycomedy87037 ай бұрын
Something to add preceding all of the great unblocking tips would be to check the water reservoir is not empty. If there is no water in the reservoir it may appear to be blocked, many thanks and contrafibularites Jason 😊
@CarSpyTV7 ай бұрын
Good luck with your KZbin channel, Jason.
@Bozey0 Жыл бұрын
Love the enthusiasm and energy! Great in depth video
@CarSpyTV Жыл бұрын
Thank you. Glad you enjoyed the video.
@markwilliams2830 Жыл бұрын
Hello Stephen.Well explained and thankyou.When I was younger I remember a neigbour had this trouble with his old Cortina.He resorted to using Drain Cleaner and agitation which worked well.Be wary and protect your eyes and hands.
@CarSpyTV Жыл бұрын
Thank you, Mark. My grandfather had a few Cortinas. Perhaps he used drain cleaner, too! Hope you're well.
Hi there. Just seen your video. Nice easy to follow methods. Well done. My method is also simple based on prevention rather than cure. Every time I descale my kettle rather than discard the solution I pour it into a tub and allow to cool and put my washer jets in the solution for about 10 min. After thorough rinse with fresh water re-install jets. Been doing this for years and it must work as never had a blocked jet.
@CarSpyTV3 күн бұрын
Excellent info, Keith. Thank you. Best wishes from CarSpyTV.
@CarSpyTV Жыл бұрын
VIDEO: Ford Focus Mk2: Avoidable Dead Battery - kzbin.info/www/bejne/rnLGdZtve9Kkn6s
@anne8781 Жыл бұрын
Love your three methods to unblock your washer jets. Think I would be able to do that when needed.
@CarSpyTV Жыл бұрын
Glad the video helped, Anne.
@ianleak Жыл бұрын
What a brilliant idea mine on the left isn't as good as the drivers side, so tomorrow I will have a go, you have a good weekend mate
@CarSpyTV Жыл бұрын
Sounds good. Let me know if you need to borrow the fuse wire! Enjoy your weekend too, Ian.
@nta.16 Жыл бұрын
Another good video. Being working class I don't think I've ever seen white vinegar. 😃
@CarSpyTV Жыл бұрын
Thank you, Nta16. Perhaps white vinegar only exists in myth!
@nta.16 Жыл бұрын
@@CarSpyTV obviously posh 'ouses 'ave it. 😄
@CarSpyTV Жыл бұрын
It's too posh for the likes of me, guv!
@Nahtanojpt Жыл бұрын
That's my weekend sorted. I've been meaning to clean my rear screen washer. Now I know how, especially using household items. Thanks Stephen. Love your videos.
@CarSpyTV Жыл бұрын
Good luck, Philip. Glad you like the channel.
@ChoiceChampion1Ай бұрын
I used white vinger and needle to up my car's washer jet and it worked! Thanks
@CarSpyTVАй бұрын
You're welcome and best wishes from CarSpyTV.
@katherinemacgilchrist8526 ай бұрын
Brilliant thank you. MOT tomorrow and one washer is blocked. Will try to see which method works. 😊
@CarSpyTV6 ай бұрын
You're welcome. More videos to follow. Good luck with the MOT.
Lol, some elements of this video made me chuckle. 😂 it’s always best to know the tips and tricks. I think the front washer jets on my car are a different kind of design. I miss this kinds of washers.
@CarSpyTV Жыл бұрын
Thank you, Matt. Mrs CarSpyTV is now wondering why she can't find her toothbrush!
@mattsbeamer Жыл бұрын
@@CarSpyTV haha, poor Mrs CarSpyTV. I hope you buy her a better one to replace it. Lol.
@HowardEllisonUKVoice Жыл бұрын
Great explanation - and entertaining! On my old Getz the nozzles were clear, but there was an airlock or something in the main tube: blowing down it and running the pump while blocking and unblocking pipe with my thumb fixed things. I would have hesitated to pull off pipes until seeing your video! Appreciated.
@CarSpyTV Жыл бұрын
Thank you. I'm glad the video helped you fix your car. Best wishes from CarSpyTV.
@Bob-pb5gd Жыл бұрын
Great how-to and well explained.
@CarSpyTV Жыл бұрын
Thanks Bob. I'm still looking for the needle!
@rdt1882 Жыл бұрын
Hope you find the needle before it finds you!
@chino852456Ай бұрын
i enjoyed a lot the way you explained everything :D, you need more exposition!! im subscribing!
@CarSpyTVАй бұрын
Thank you and welcome to the channel.
@jaylex6662 ай бұрын
When your in trouble, all you need is an enthusiastic brit to solve your problems haha
@CarSpyTV2 ай бұрын
Glad the video helped and best wishes from the UK.
@MoLeToWN3512 күн бұрын
Great stuff. Entertaining and informative.
@CarSpyTV12 күн бұрын
Thank you. Glad you enjoyed the video. More to follow.
@cinziagatti94232 ай бұрын
Thank you!!!! I’m come from Italy
@CarSpyTV2 ай бұрын
You’re welcome and best wishes from the UK.
@penguininshorts Жыл бұрын
Another fab vid. Where's the chips to go with the vinegar?
@CarSpyTV Жыл бұрын
I blame the dog!
@borbalakiss36798 ай бұрын
Thanks alot it's useful video. I will do mine by weekend.
@CarSpyTV8 ай бұрын
Glad the video helped. Plenty more to follow.
@SueBrodie-i7h4 ай бұрын
Thank you just what I was looking for 😊
@CarSpyTV4 ай бұрын
You're welcome. Glad the video helped.
@montsep.44595 ай бұрын
👍, I'll try it on my old Nissan Micra K12, I hope it works
@CarSpyTV5 ай бұрын
Good luck and best wishes from CarSpyTV.
@jasonhappycomedy87037 ай бұрын
Such a funny video great editing. also does the washer tank ever need unblocking? Thank you
@CarSpyTV7 ай бұрын
Personally, I've never had a reservoir get so dirty that it's blocked. Glad you enjoyed the video.
@brendahadley12803 ай бұрын
Thank you off to give your suggestions ago 🙏
@CarSpyTV3 ай бұрын
You're welcome and best of luck.
@paulmorris51663 ай бұрын
Thank you for this. I am off to have fun.
@CarSpyTV3 ай бұрын
You're welcome, Paul.
@servicekid7453 Жыл бұрын
Hahaha i thought i was the only one who used a sewing needle to clear the washer jets. When i go at it from the underneath i wedge a drinking straw over the port and blow through it to clear it. I might try the dental brush next time! 🤣🤣🤣
@CarSpyTV Жыл бұрын
And I might try a straw! Good idea.
@BobK59 ай бұрын
Why not try the washers with the pipe disconnected to see if washer fluid is flowing to the jets before assuming it’s the nozzles?
@CarSpyTV9 ай бұрын
That's certainly a good way to confirm the pump, switch, fuse, and tubes work before clearing the jets. Best wishes from CarSpyTV.
@susantaylor55908 ай бұрын
What if the jets aren’t on the bonnet, but are on the car( ie you have tried method 1 but can’t do the others ? )
@CarSpyTV8 ай бұрын
Perhaps there's a video specific to your car that explains how to remove the jets. Good luck. Susan.
@jasonhappycomedy87037 ай бұрын
Great video Would descaler work as well as the bicarb mate?
@CarSpyTV7 ай бұрын
Thank you. Glad you enjoyed the video. I haven't tried descaler on washer jets, but I suspect it would work.
@ianpreece639111 ай бұрын
brilliant worked for me thank you
@CarSpyTV11 ай бұрын
You're welcome.
@sherrydyer2553Ай бұрын
Dramatic much 😂 thanks for info!
@CarSpyTVАй бұрын
You're welcome.
@trulymeparker Жыл бұрын
I used a water pick for cleaning teeth and blasted a good bit of debris out. Nozzles are spraying like brand new now
@CarSpyTV Жыл бұрын
Glad you've got it sorted.
@attilabalogh8548 Жыл бұрын
Simply just blow some Compressed air through the hose, clears blockage in no time
@CarSpyTV Жыл бұрын
Yep. That's a good solution if you have a compressor (or a can of air). Thanks for the comment.
@fullparranrlgames37588 ай бұрын
MiX the bi carb with the vinegar you get a chemical reaction ...it fizzes like a soda drink😊
@CarSpyTV8 ай бұрын
Interesting idea!
@justminiracingivan88709 ай бұрын
Instead of water, it might be better using white vinegar. That'll make a proper reaction. Let it work overnight and no more clogging.
@CarSpyTV9 ай бұрын
Thanks for the suggestion and best wishes from CarSpyTV.
@pingchow46406 ай бұрын
Great video. Giving me Pemnywise vibes 🤣
@CarSpyTV6 ай бұрын
Glad you enjoyed the video and best wishes from CarSpyTV.
@gracezimmerly263110 ай бұрын
I think baking soda and white vinegar is what bubbles and cleans just about anything.
@CarSpyTV10 ай бұрын
Thanks for the comment and best wishes from CarSpyTV.
@Paul.Gascoyneuk9 ай бұрын
A job for tomorrow 👍👍
@CarSpyTV9 ай бұрын
Good luck with it.
@Naz-em7zr Жыл бұрын
Love old nissan micra
@CarSpyTV Жыл бұрын
Me too. I prefer it to the K12.
@jakescottage68936 ай бұрын
I just fixed mine before an MOT check
@CarSpyTV6 ай бұрын
Glad the video helped, Jake. Best wishes from CarSpyTV.
@ashdon86039 ай бұрын
Are you a dentist or mechanic 😂
@CarSpyTV9 ай бұрын
Not sure! I'll check my CV.
@eeeffert60428 ай бұрын
vinegar works too
@martinwatson3471 Жыл бұрын
Why doesn't anyone deal with rear washers? I cant even see the bottom of the jet or the pipe to it on my daughter's 2015 KA.
@CarSpyTV Жыл бұрын
You may have to remove some interior trim, Martin. Good luck.
@eeeffert60428 ай бұрын
you are amazing!
@CarSpyTV8 ай бұрын
Thank you! That's appreciated.
@tashacurtis1473 Жыл бұрын
I just love you!
@CarSpyTV Жыл бұрын
Thank you, Tasha. Very kind! There’s plenty more content to follow. Best wishes from CarSpyTV.
@Aussiedave54 Жыл бұрын
Method 1 , replace them with new ones, from Amazon , cheap 😊
@CarSpyTV Жыл бұрын
Never! This is a once in a lifetime opportunity to use dental products on a car! Best wishes from CarSpyTV. 😊
@iainwelsh9372 Жыл бұрын
First option: blast them close-up with a pressure washer.
@CarSpyTV Жыл бұрын
Has a pressure washer worked for you, Iain?
@iainwelsh9372 Жыл бұрын
Yes, it has. I suppose how badly bunged up the jets are. Along with the needle, it’s probably a good first option.
@CarSpyTV Жыл бұрын
Interesting comment. Thanks.
@bilalalias1608 Жыл бұрын
Will spent 10 $ to you if you could show how to change the throttle body