How to Unclog a Printhead - DTF Clogged Printhead

ATTN:
NEW DTF SUPPORT GROUP
Need more help, for FREE??
DTF Printing Facebook group:
/ dtfsupport
All links are NON affiliate links!
For DTF & Sublimation supplies I highly recommend Vibrant Vibes Ink:
www.vvinks.com/
For daily FREE graphics for DTF and sublimation look here:
/ showtimesub
For help with DTF printing and or just share your creations with like minded folks, visit DTF Printing Support Facebook group:
/ dtfsupport
Questions or comments please drop them below.
Contact me on Instagram @SouthbayCreations
/ southbaycreations

[@SouthbayCreations]

Make sure you join our Facebook group for more FREE tutorials/classes! facebook.com/groups/dtfsupport/

[@user-mk4jy1px7s]

Thank you so much! U just saved my day...from Philippines with Love

[@samday4424]

ALWAYS WITH THE SAVE THANKS FOR SHARING STAY PRESSED UP

[@SouthbayCreations]

You’re very welcome! Happy New Year 🎊

[@tshirlablabgr5371]

your small filter inside the printhead is cloged, every time you clean the channel the clog will come back.......change the manifold, or use a needle to damage the filter from under the manifold

[@pixelbat]

How often are you having to perform this sort of maintenance? I kinda wanna give DTF a go with a XP15000, but I see so many horror stories. I've been doing sublimation for years, so I don't know if the maintenance and upkeep is similar??

[@SouthbayCreations]

This is daily and depending how much you print it could be twice a day. There's a lot of folks destroying printers because they are not keeping up with the maintaince.

[@yourunclesam6780]

What kind of cleaning solution are you using? and this is for any kind of printer? eg: Epson L1800? Thank you

[@SouthbayCreations]

VVINKS.COM is where I get mine

[@yourunclesam6780]

@@SouthbayCreations Thanks a lot

[@quaronharrison6157]

I’ve been told it’s windex with ammonia distilled water and white alcohol

[@cheluradio]

What cleaning solution would you recommend? At the start of converting a epson 1430. Do I need to remove center rollers to not effect print? Any assistance would be appreciated. Thanks in advance.

[@SouthbayCreations]

I use DTF cleaning from vvinks.com Yes you need to remove those center rollers and leave two on each side . Come by the Facebook, there's a ton of people there, including myself, that will be more then happy to help you absolutely FREE!

[@SouthbayCreations]

facebook.com/groups/dtfsupport

[@cheluradio]

@@SouthbayCreations I sure will thanks again!

[@ezrryyuzal]

towel part is not suit to do bro..just take out your print head n clean it…