How To UNDERVOLT Your GPU - The Ultimate Easy Guide 2024 (Nvidia GPU)

The ULTIMATE Guide to UNDERVOLTING Any GPU in 2024 👍 25% discount code for software: PAN20
Windows 10 Pro OEM Key (17$): www.whokeys.co...
Windows 10 Home OEM Key( 14$ ) : www.whokeys.co...
Windows 11 Home OEM Key( 21$ ): www.whokeys.co...
Windows 11 Pro OEM Key( 17$ ): www.whokeys.co...
Office 2016 Pro Plus Key (28$): www.whokeys.co...
Office 2019 Pro Plus Key (48$): www.whokeys.co...
Windows 10 pro +Office 2016 (43$): www.whokeys.co...
Thanks for mediamz for sponsoring todays video!
Check out the 2nd channel! Same content, cut down into small bite size videos Panj2 Here: / @panj2
🔗🔹Info for this video🔹🔗
🔽 Looking for more Optimizations? Check out these PLAYLISTS 🔽
• Nvidia Optimizations: • The BEST G-SYNC settin...
• Radeon Optimizations: • AMD Radeon setting for...
• Windows Optimizations: • 🔧 How to FREE Up More ...
• CPU Optimizations: • 🔧 Undervolt Your INTEL...
• Gaming Tweaks and Optimizations: • Gaming Tweaks and Opti...
• FPS Guides (per game): • 🔧 Baldurs Gate 3: Dram...
#nvidia #radeon #windows11key #undervolting
Sounds By Epidemicsounds

[@sdrubaa]

Great video and easy to follow as usual, got my Aorus 2080 super stable with 0.975v and 2040mhz clock speed. Lowered the power from 250w to 200w with the same score on heaven benchmark and temps went down by 10°c.

[@ogpredatorGer]

Strix rtx 2080 super 0,92v and 2102mhz

[@benq994]

Listen to this guy, he knows what he's saying. I knew this trick already from another youtuber and he also mentioned to increase the curve in 15MHz increments for better stability on nvidia. Long story short my 12GB 3060 got + 225Mhz and - 218 mV i capped it at a little bit higher frequency than it could go before editing it and it get better temps at higher game settings than before. I also have a habit of capping my fps to 60 (which is my old samsungs rate) and gpu doesn't get as loud as it used to. Do it guys it's basically getting better gpu for free and saving power. And you can't break your gpu by lowering voltage the worst thing that can happen if you overdo it is your game's crash.

[@Hexajenus]

I have the same rtx 3060 card. What's your frequency and voltage limite? Mine is 900v and 1900mhz. Would be helpful if you’ve replied.

[@benq994]

@@Hexajenus at 900mv i have 1905Mhz but the curve doesn't end there. In the highest point it gets 2010Mhz at 956mv and it goes flat at 2010. But sometimes it changes on it's own when i restart pc:/ Im not sure what is the max frequency it can get but for me these settings are stable and satisfying enough.

[@Best_Chuansatien]

@@HexajenusI think it depends on a chip not every 3060 12g will be the same. it's just like silicon lottery

[@Typhon888]

@@Best_Chuansatienthat is true but it should be close as long as it’s the same model more or less but then yes you could get a “bad” chip that can’t OC at all. I remember back in 2009 I got a new ATI HD 5970 a $400 GPU. The memory was unstable at stock speeds but I lowed it by 25mhz and it worked for the life of the card. I eventually made a custom bios so the card would be permanently stable.

[@ИванНайденов-п8ж]

Видео память даёт больший профит от разгоне, чем увеличение тактовой частоты видео чипа. Пробуйте добавить 1000+ мегагерц на память. А затем сравните результат с разгоном ядра. Можно совместить оба разгона. П.С..даунвольт это очень полезная вещь. Пользуюсь с выхода afterburner.

[@dr.feelgood5798]

I have been doing undervolting since the GTX 10 series. I prefer undevolting compared to overclocking / overvolting, because the gains we get from OC is so small compared to what we give up. I love having my PC running efficiently. I do the same with my Ryzen CPU :P

[@sadasd-n2f]

Undervolting is Overclocking why you categorize them as different things.

[@dr.feelgood5798]

@@sadasd-n2f That's not what i wrote.

[@JagsP95]

You can undervolt and oc at the same time if you have the time lol

[@dom47]

​​​@@JagsP95 oc means the number of instructions processed per second is increased ,which means it needs more power to operate efficiently,if u undervolt i think it would reduce the efficiency as we are making the cpu work more with less fuel

[@georgejones5019]

​@dom47 you're only half right. Increase efficiency is doing more with less. You'd zone in on increasing your clocks while bringing down the volts and maintaining stability. Doing more with less.

[@DravenMoral]

Asus Rog Strix 1080: 900mV - 1911Mhz & memory 5300mhz. Gpu temp: 71°->59° Cinebench R24: 3909->4189 Forza Horizon 5: 96-104 -> 105-118 And finally no coil whine sound! Thank you very much!

[@VaracolacidVesci]

Cinebench is cpu pal no gpu

[@sp-ce]

​@@VaracolacidVesciCinebench R24 is gpu, pal.

[@VaracolacidVesci]

@@sp-ce it only adds GPU but here is not

[@Panjno]

The ULTIMATE Guide to Undervolting YOUR Nvidia GPU, let me know your results below and which method you decided to go with!

[@kyb3400]

when amd undervolting?

[@ManuelSPro]

When AMD last processors for laptop too, this is great thank youu

[@Takedown87]

I go with first method. Getting 140-150w in cyberpunk with 4070. Im on 0.925v at 2750 mhz

[@notstarboard]

I got my GTX 1060 6GB down to 875 mV at 1885 mHz. It was 1031 mV at 1885 mHz with the stock curve. Temps are down ~10 C and power under peak load is down ~30 W. I've had this card for like seven years and I can't believe I didn't do this earlier.

[@intuit13]

how the hell do you get the voltage monitoring and voltage slider to work w/ a 4070 super?? I've had 3 Zotac Amp Extremes over the last 8 years with this same PC and i've always been able to monitor voltage and use the voltage slider (although it was just a % slider and I couldn't put in exact numbers), but I just bought an ACTUAL msi card (4070 super gaming x slim) and I have a greyed-out voltage slider and no monitoring, despite trying all checkboxes (over and over again...), drop-down menu options, and re-installing the application (and trying different skins..). Nothing works. Is there a way to do this with a 4070 super without doing anything crazy like changing BIOS's or dismantling the card itself?

[@magicfluteb]

A major improvement in presentation by slowing the speed in which you speak. I would always have to go to settings and slow things down. As usual, a thumbs up.

[@SpitfireSpud]

This was a great video to watch. I ran the Heaven benchmark and was able to drop my voltage of my 3070 Ti from 1.025v down to 0.900v and no issues whatsoever! 👍

[@quintingreyling2571]

I've previously undervolted my CPUs but never my GPU. This guide was extremely helpful! Not applying any undervolting to my RTX 4080 Super, my card was running Port Royal consistently over 300W and dropping well below 2790MHz consistently. After applying the undervolt you explained, I was running the same test at 5 degrees cooler, at a max of 285W and never dipping once below 2790MHz. The score also climbed with about 50 to 18 305. Keep up the great work in educating newbies like me!

[@brathanchen6129]

got a better 3dmark score with undervolting also 6 celsius less temp. thank you for the tutorial

[@marcuszettergren8885]

I applaud this video. Best user guide of this tool i have seen. 4090/2750mhz/0.925. Close to 100W less at the same fps as stock.

[@kruding]

for Me As a non English native-speaker, your guide is super easy to follow, easier than my native language guide.

[@j.d.4697]

I love undervolting, it's like sorcery. Stuff runs faster, smoother, cooler and quieter, and probably lasts longer too. Better way to navigate the curve optimizer: 1) Select your node (tab = right, shift+tab = left) 2) Select everything, then shift + up arrow to go up more accurately. 3) Select node and everything to the right, then flatten with shift+double enter.

[@w061a09]

lol thank you really, trying to drag the mhz on my 3070 too but i could never, until seeing ur comment

[@Nodgelol1]

Nice and clean guide! Thank you very much, sir! 🤓 Sorry for the extreme long commet, but I guess more details are better 😅 I took Monster Hunter World Iceborne for the test. For getting the values correctly I took HWInfo64. My KFA2 RTX 3090 is stock-boost-clocked with 1695 MHz, 9750Mhz(Mem), thats what MSI Afterburner red out of the system. In my tests I let the Mem-Clock untouched, hence in stock settings! MHW Settings: QHD(1440p), Highest Settings, but DLSS- Off, no HD Textures (because of 50GB download and diskspace..). Disclaimer: That are not the Settings I usually play I took that only for stresstesting purposes. After a first start of MHW Iceborne, HWInfo64 gave me values like: GPU clock: Min: 1545MHz Max: 1905MHz Avg: 1650MHz My Question is: Would you took avg. or min or max values? I mean I could stress out boost frequenz to 1905MHz or is it unnessessary stress to the card? I tried the steps from your guide with 1695MHz just now. This are my results: GPU with stock-settings reached maximum values like: Temp: 84°C Voltage: 1.069V GPU Clock: 1905MHz Power: ~350W FPS: 117 GPU with undervolting: Temp: 76°C Voltage: 0.737V GPU Clock: 1695MHz Power: ~300W FPS: 110 The temperature looks nice, but no more fps and the power consumptuin is okayish with arround 50W less I guess. The low avg. fps is nothing but in general I hope you or someone here can give some hints to improve even further. Thank you all very much! 🤓

[@CrowleyRises]

Thank you so much. I was able to get my Asus 4080 Super ProArt down from 1.075v stock to 0.960v and lock the fans at 35% and get the same max temp of 70C. Wattage drop was almost 100w. I am using a Fractal Terra SFF case. It is now whisper quiet when gaming. I can get the temps down to about 62 if I leave the fans on auto but I prefer the silence of the fans at 35% because they will ramp up to about 65% which is much louder than I want.

[@DivyanshBalchandani]

This was so clear, concise, accurate and easy to follow! Bravo to you. Thank you so much!

[@hasyirMelan]

Thanks for the RTX 3050 Mobile one dude. I tried and it works. on the laptop its always best to just cap the fps anyway just to not overwork the CPU. because it also helped with both the CPU and GPU temp. My laptop is Acer nitro 5 an515-57

[@Dabid13]

how much were you able to undervolt it, I was only able to decrease 0,194 V until the game crashed. Maybe cause I have a 3050 ti but anyway. How much volts were you able to decrease?

[@abitu446]

so for 3050 rtx what is ue settings in mhz and the volt??

[@notstarboard]

Same for desktop. Not capping FPS is pretty much just increasing temps and using extra power for no reason unless you're playing with lots of cash on the line.

[@notstarboard]

@@abitu446 It will be different for everyone. Just test it out yourself.

[@brooksbrooks8060]

Many videos of amateur gamers miss the part explained in this video. You shift hold and move the whole curve up then cap. Great video.

[@kerryfreudenthaler3842]

no we didnt miss that maybe u did and relized it

[@brooksbrooks8060]

@@kerryfreudenthaler3842 Other videos by amateurs either don't raise first, or even lower first then cap. Do you make incorrect videos? Or are you just defending wrong info for no reason

[@ЯндексДЗЕН-ю9в]

So, why do we need to lift the whole curve?

[@keroner9998]

Love the tempo of your vids. No dragging around. Thanks!!!

[@venzos]

lowered the temps on my 3080 from 88°c to 79°c staying at the same mhz but undervolting 0.60v thank you

[@hessammehdizadeh3239]

Thanks! Have a KFA2 SG RTX 4080. 2640 MHz / 1.025V Stock 2655 MHz / 0.925V Undervolted - Stable Around 22% less energy consumption, have boosted and more stable FPS. Avg. GPU temp reduced by 10 C. The hottest spot of GPU reduced 18 C.

[@augustomartins9516]

With my 3070 I used the afterburner curves with fantastic results, so this method is definitely true. Now that I have a 4070Ti I use a slight overclocking without the need for undervolt , as the temperature very rarely rises above 60ºC. Good video.

[@KillswitchRobie828]

You can use the Nvidia Performance overlay on a Laptop to monitor the GPU voltage

[@adamjar]

I did Method 1 on my Gigabyte GTX 1660 Super 1xFan and it worked perfectly! On Unigine Heaven Benchmark I went: -0,162 V -24,3 W -9° -528 Fan rpm + 0,3 FPS Thank You!

[@ayeshakhan713]

What was your core clock? How much u reduced

[@peanutbutterbean1738]

got a stable 875mv on my 1660 super! TDP went down from 125W to 93W and max temp under load went from ~78 to ~65, so now the fans are no longer audible under full load! will definitely be doing this on all of my GPUs in the future as power usage is a massive deal for me, especially since where i live having to run on backup power supplies/systems is commonplace, and reduction in power consumption goes a LONG way

[@brianwilson594]

Panjo - Please do a video on vram overclocking. Specifically I think people need to know that higher ram speeds does not equal higher performance on new cards due to error correction. The games or benchmarks will not necessarily crash at unstable speeds, but performance will be less. It would be great to see the quickest way to test this.

[@James2210]

There's usually a sweet spot about halfway between base clock and where it outright crashes. e.g. if it crashes at +550 mhz, set your vram oc to 275

[@Jaskierooo]

Very good guide, i can confirm that this is correct way to undervolt gpu. There are a lot bad guides on KZbin even from big channels.

[@DiceAir]

I agree. the thing is if you look at Hwinfo and you look at effective(real gpu clock) speed vs gpu clock speed(targeted clock speed) it should be closer vs other methods where they lower clock speed and then raise it. I do one step further by using oc scan to get the best overclocking settings then either limit clock speed to something a bit lower or reduce voltage. I also like to use nvidia smi to lock my clock speed and thus reducking temps even further.

[@notstarboard]

When shifting the whole curve up at once, in theory you would also have to test for stability at lower frequencies in order to be sure your undervolt is stable. You might also need to settle for a lower undervolt at peak frequencies if instability hits at lower frequencies. There are plenty of guides that are outright wrong out there, and while this one certainly isn't wrong, it also feels like a more aggressive undervolting method.

[@chiknhawk90701]

Awesome video sir. So easy and straight to the point.

[@Ackz89]

For anyone trying this and having issues flattening the curve, after you shift click and drag the bar up - if shift double enter doesn't work, shift click the far right box and type in the same mhz as you want it to flatten at. Also, running Cyber punk settings benchmark I found quite handy whilst doing this process

[@vampiszon6620]

Why can't I see vGPU Voltage in monitoring tab even after unlocking voltage monitoring?

[@MegaGovert]

Thank you, very precise, easy to follow, no nonsence. And most importantly woks like a treat.

[@TopiasSalakka]

On Radeon cards, undervolting usually doesn't automatically result in lower power consumption, but higher clockspeeds. I recall seeing up to 10% higher clockspeeds on my old R9 Nano with undervolting, power consumption stayed the same. I believe it depends whether your GPU is hitting the clock limit or the power limit at stock settings.

[@Anlaki0013]

Just a reminder you don't want to use MSI Afterburner on AMD GPU (in case other readers do this)

[@Kashiki20]

​@@Anlaki0013i have used msi afterburner for a while because i have a rx 580 which the amd andrenaline software was crashing/blue screen everytime when i do some changes ontuning settings.

[@Kashiki20]

​@@Anlaki0013i had no issue using msi

[@LifeStartsAtrpm-ru1xo]

6:13 You can also automate the undervolting by pressing the ‘OC Scanner’ in the top right of the MSI screen! It automatically finds the optimal voltage-curve for you. (Sometimes you have to restart your computer before the OC Scanner works btw).

[@limpa756]

Manual is always better.

[@psylina]

OC scanner always goes to unstable results for some reason

[@_gr1nchh]

I needed this. My room runs a bit hot and so my GPU was getting up close to 70c which is still safe temp for it but I also don't like it being that hot. With the undervolting, I was getting same FPS but using 50 less watts and got the temps down to around 61-62. Even upped the core clock a little bit and instead of 1830 it was running around 1890 and still stable. I went with method 2 as I don't know much at all about the curves and stuff and didn't want to mess anything up. Thanks!

[@XxoxX-pc]

I just want to say thank you for a excellent guide 🙏 legend

[@Panjno]

And thank you for an excellent comment :)

[@poppyboiXCIX]

One thing I learnt the hardway with undervolting is that what is stable in some games/applications, doesn't apply to other games as they all use your graphics card differently, so its best to test your undervolt with a few graphically intense and demanding games, not just one. Also, this guy suggests to bump up your voltage when you're unstable, but it's better to lower the clock/mhz 100-200 you won't tell the difference, the point of undervolting is for cooler temps with minor to no performance loss, so bumping up the voltage is the last thing to do as more voltage = more heat.

[@3l3]

Lowerd my gpu temp with 10 C and bosted fps around 20-30+ got a laptop with a rtx 3050 4 gig vram just took the settings u provided for the 3050 mobile thx alot man👍 gpu temp before 57 C now 47 C 😁👍

[@Marcus_Halberstram]

Undervolted my 1080ti from 1.050v to 0.800v,.reduced core clock by about 100 and increased memory clock by 250. I mainly did it because it is my work PC and I don't always wear headphones. The fans are now silent under heavy load and it doesn't sound like I'm sitting next to 2 industrial fans. Thanks for saving my sanity and around $200 for an AIO.

[@avez-ch1np]

Thank you, managed a 1.05 to 0.918 undervolt on my 2070S. Temps only changed from 79C to 75C, but I think my GPU was throttling itself as my voltage was constantly fluctuating to lower levels when I tried to figure out my initial voltage. 5000 series can't come sooner enough because I think my GPU is finally starting to see its age. Make sure you test out your settings on multiple games. I found I could go all the way to 0.9 on Heaven benchmark but some games did not load to the main menu.

[@mazenmowafaq215]

thank you so much, I managed to drop my GPU temp from 79 to 72!

[@OasisFinder]

One of the beautifully explained video for someone who never done undervolting, You have one more like and subscribe sir

[@phamquanghuy2222]

Dell RTX 3070 OEM, running 1.1V at 1725MHz (0.85V after overclocking) Temp dropped 76 to 65C Power 223W to 140W Damn that's insane. Thanks a lot.

[@some-one-else-r]

I've been waiting for this! Appreciate it.

[@zeroyi7]

RTX 3060 ti, i5 10400F 1890Mhz 1,081V -) 1890Mhz 0,956V GPU temp 69°C -) 60°C Power consumption 200W -) 160W MSI Kombustor benchmark 1080 SCORE: 3674 points -) 3879 points Kingdom come: 85-100 fps -) 95-110 fps Thank you very much.

[@Shuubox]

Managed a decrease of almost 20% power usage while having the same fps, great guide

[@lukeashe8313]

Gtx 1080 Stock 1860mhz @ 1.060 Stable 1848mhz @ .875 Managed to get 1633mhz down to .775, didn't want to mess too much with that Base voltage is .625 I use GTAV single player to check stability because it's fairly sensitive. It'll crash in about 5 minutes if it's not stable. Also test with cyberpunk 2077

[@DarkCosmoX]

The Best GPU undervolting Tutorial So far. Neatly Explained Thanks a lot 🙌🙌🙌🙌

[@gencoserpen1260]

I used method #2 on my Inno3d Twin X2 RTX 4070 Super because Afterburner was not monitoring core voltages on my GPU despite unlocking voltage monitoring in the settings (Curve Editor was available though so I could still use method #1 in the future). I set the power limit to 84% and core clock to +180 Mhz. The GPU now draws 185W max instead of 220W (max temperature dropped from 71C to 66C) and performance is nearly identical in the Shadow of the Tomb Raider benchmark (only dropped from 112 fps average to 111 fps, @3440x1440, RT enabled).

[@eldermorph2023]

i also have a 4070 super and cannot see the gpu voltage option even after checking both unlock voltage settings. bizarre.

[@TheHDLook]

Great. Good explanation and visualization. You covered all the details I wanted to know about this topic. Than you

[@VipapkStudiosOfficial]

RTX 3070 Ti 8GB OC 1920mhz / 1.075v --> 1920mhz / 0.925v Temperature went down by 5 Celsius (62 --> 57) which is great and power went down by 70-80 watts (~270 --> 200) which is incredible! FPS did go down but only by 2-4 which I can compensate with DLSS, optimized game settings and sharpness. Cheers!

[@deejkeithanmusic]

The part about capping my fps at the end is what fixed my overheating problem.

[@merclord]

I'm glad I found this video. Simple and easy to follow instructions. However, I could not find a GPU Core Clock setting in MSI. I did some research and found that it was just Core Clock.

[@aminedbgt]

RTX 2080Ti here. I think the best I could get was 1925 mhz @900mV which is pretty perfect for everyday undervolt/overclock. Power draw never exceeds 260-70W and temps never over 73° at max load with stock cooler. Decent imo ! I did 1800 mhz @825mV but I don't think it's a good compromise, unless you want to keep temps under 65°. You'd lose some fps but it's not really that bad. Basically anything under 1.000mV for this card is GREAT, less power draw, less heat, and great performance. You could go over 2000mhz @1.075mV but it's too much for an air cooled GPU to handle, you'll be throttling in no time.

[@Knoofle]

Amazing guide, thank you for this

[@ldmedicity]

GPU2 is NOT always your integrated. My Legion 5 pro shows gpu2 with active percentages on dedicated GPU mode (3070ti), while GPU1 is 0% (implying integrated). Just a heads up for everyone.

[@01Echo]

ty

[@TheGamingNerd97]

Hi bro i also have legion 5 pro with 3070ti but afterbuner doesn't show me all the settings options as explained in the video. Can uou help me with it

[@ldmedicity]

@@TheGamingNerd97 on the GPU or CPU side. On Mobile, it possible it's just locked down. I'm pretty sure that's the case for the CPU at least. The GPU should be fine to alter though. What settings are you missing

[@TheGamingNerd97]

@@ldmedicity i have a laptop but can i change the memory clock or core clock?? Im

[@ldmedicity]

@@TheGamingNerd97 what memory are you trying to overclock? I'm assuming the GPU?

[@globezy6637]

this worked new sub incoming

[@ChuckLopez]

Incredibly helpful! Thanks! *subscribed*

[@martmeister]

Excellent. I have basically kept the same FPS but brought down my temps several degrees and maybe about 10% less power on my 400W EVGA 3080. So I am getting pretty close (percentage wise) to your results.

[@jairhernandez4623]

Can I ask what's your model? I have XC3 ultra, pretty much one of the hotter model and I'm gonna apply this today, 78° is the max I get and aiming to get 75° or less, maybe put down mhz a bit bcs is really powerfull, how much mV decreased yours?

[@martmeister]

@@jairhernandez4623 FTW Ultra. Regardless it’s worth doing if you have the time and don’t mind watching benchmarks for a bit. Went from 0.993 to 0.860. Crashes at 0.850 for me. Yours will probably be different. Degrees went from 78 to 73. That’s under full load using CP2077 benchmark and Forza Horizon 5 benchmarks.

[@jairhernandez4623]

@@martmeister amazing, appreciate it bro, the fps weren't affected so much right?

[@martmeister]

@@jairhernandez4623 fps actually went up by 1 or 2 fps. Also power went from 400 to 370.

[@GodFather199328]

This was really helpful man, all my games kept crashing on my MSI SUPRIM RTX 3080 12 GB variant but now temps are down and running smoothly. Windows 11 really made things worse.

[@vickeyshrestha2931]

Not sure whoch guide to follow for undervolting. This? Or the orthers where they 1. Lower their core by -200 2. Grab the single desire volt point and drag it up to the desired Mhz 3. Click apply (No Shift holding and bringing entire curve up) Just wondering which is better way to undervolt 😢

[@Beefy5cyl]

Did you ever figure this out?

[@zRedPlays]

My RTX 3060 went from 1890Mhz 1.081V close to 80°C, to 68-70°C at 1920Mhz 0.931V. Approximately 40 watts of difference in all games, from 145-165W to 90-125W in all games. RPM under full load decreased from 2500 to 1900. I wish I had done this sooner, and it's perfectly stable, haven't run into any issues.

[@jawefi]

hell yeah man u lowered my laptops temperature by 7 celsius and now i can play without worrying about damaging the laptop thanks

[@agapebayno5056]

Wait so undervolting only works if the MSI afterburner is in startup all the time? So undervolting is not going to work if I close the background system of MSI afterburner then?

[@scott_casper]

I use chatGPT for the question : Yes, undervolting your GPU through MSI Afterburner requires the software to be running in the background for the settings to be applied and maintained. If you close MSI Afterburner, the undervolt settings will revert to default because the software is no longer active to enforce the changes. However, you can configure MSI Afterburner to start with Windows and apply your undervolting settings automatically. This way, even if you don't manually open MSI Afterburner, it will still apply the settings every time your system boots up.

[@Tungo90]

I find out that FPS cap + DLSS pretty much reduce my GPU's temp and noise. What a life now.

[@MemphisMG86]

for a long time a good quick and nice viewed video! gg mate

[@roniNetewiKurdistan]

This is unbelievable. I braught it down from 0.795 to 0.700 with no stability issues! The program doesn't let me undervolt it more than that.

[@esteBAM979]

Question i have been wondering about for a while is. 1. Does running programs like "i-cue" which controls fans and stuff interfere whilst running "MSI after burner"? 2. Will running both be more taxing on my system and will it create conflict with each other for control? 3. Should i just turn off or uninstall i-cue?

[@Darkosa1234]

Great guide, thank you!

[@XMoldyMe]

If it can handle a long time to keep the transistors. I think the coil whine will come in time. I would keep it at the frequency the manufacturer says like 2610 MHz boost and I would only put the 2790 on games where the graphics can't really handle

[@SoundMatt3rs]

yes my rtx 4070 boost 2790 mhz but manufacturer web site says boost 2535, iundervolt the 2535 mhz 925 mv (normal 950 mv) its good to me a little performance loss but cool and quite all temps.

[@notstarboard]

When shifting the whole curve up at once, in theory you would also have to test for stability at lower frequencies in order to be sure your undervolt is stable. I assume this is why many undervolting guides don't suggest this. My question is whether you are typically more likely to experience instability while under heavy load if you shift the whole curve up as described in this video.

[@brahim22526]

Thanks for the Great tutorial, i managed to get stable undervolt for my rx 6900 xt, thanks to your video.

[@chypres89]

Now my Starfield runs without crashes. Thank you !

[@dangerousrambling]

Thanks for this helpful guide! ❤

[@mazziecat]

You can also do this do make your GPU run way cooler if you reduce the top clocks a bit.

[@vadek2011]

Palit 3060 TI 8 gb - I set - 0.9v 1860Mhz (y) Best guide! Thanks.

[@oskarifriman6807]

So good guide, thank you!

[@satan.natsoe9580]

thanks bro , finally i know why i cannot adjust core voltage ,power limit and temperature limit when all youtubers can , i am using laptop :D

[@acronym1435]

Thank you for such a detailed guide

[@masterloquendo1995]

Thanks for the video. Got my 2060 Super down to 1.006v from 1.069v.

[@romaniachin6751]

4070 laptop, tried to go from 920mV to 875mV. Was impressive but unsustainable, going to do the same thing later on my 4090 laptop & see how that goes!

[@KoNine9]

Why afterburner doesn't flatten my curve? I do it exactly like you say, but it won't be a flat line.

[@Bussigt]

It can be really annoying sometimes. Try to double click the empty grid after adjusting the curve, then select the area you want to flatten by holding shift, click and drag the cursor across the grid from left to right, then (while still holding shift) hit enter twice. Be sure to include your selected "top dot" in the marked area.

[@MrRossoMoto]

RTX 4070 stock 2835 MHz 1100 mV, for now my undervolting result is 2820 MHz at 1010 mV. In cyberpunk temps didn't really change because the GPU runs at 100% eitherway and I'm at 55*C but the power draw lowered from about 176W to about 146W

[@Deltatwo3]

This is fantastic! My 13900ks is on water i think my next build will have the 15900k and 5090 both on water and undervolted.

[@elewolfie180]

watts from 190 to 128 and temp from 66 to 58. Thanks for the guide

[@Shirombo]

Thank you for the vid this is a very easy understanding tutorial video.

[@iqfiskhora]

I cant find "GPU1 voltage" I only find ""GPU1 voltage limit" on the monitoring list? On Afterburner Volt is 0 too. Even while gaming.

[@unmortal8672]

pny 1080 i started at 1445mhz and .800v lowered sitting around 84c got set it to .750v at 1445mhz and im getting boosts up to 1860mhz while sitting at 74c did this mainly to stop it from heating up my room and ended up with a whole hell of a lot more performance and a cooler room

[@orangemc9358]

What should I do if my GPU won't "settle down"? Where as yours settled down at 2790MHz, mine fluctuates A LOT and never really stands still.

[@harshabhimanyu6106]

That is because your temperature is hitting the limit again and again. Try to use a much lower max clock speed and do the steps it worked for me.

[@yaduvirseeruttun4925]

@@harshabhimanyu6106 what do you mean by using a much lower max clocks speed how do i do that with msi afterburner exactly?

[@harshabhimanyu6106]

@@yaduvirseeruttun4925 the same thing which is done in the video but go much lower like to 1400 1300 mhz

[@lilnico4877]

Did you manage to find a solution to this? Mine for some reason jumps around a lot, in Cyberpunk it jumps between 1710-1755 but in Forza Horizon 5 it sometimes hit 1860 or 1875 very strange..

[@Xong217]

How does shift enter work for y’all? It won’t flatten the curve for my afterburner

[@JP-gh6yd]

I had the same issue, but you have to click slightly to the left of the mV setting you are trying to set and then shift click to the right, then do the double enter. For example if you are changing 1000 mV and make it +75 to mhz you click just left of 1000, like 995 or something then you can do the shift click double enter like the video.

[@yukidukiii]

Really thx for the tip My 3070ti Before undervolt is like 78-79 degree after undervolt it stable at the 69-70 degree + I did boost 1-2fps. Really Thx For The tip

[@ambstudios4564]

Thank you so much! My 4070 Ti Super now consumes almost a 100w less

[@junis6554]

This is the best video at that topic ive ever seen

[@kilsnacks]

You seem to actually be doing this correctly a lot of tutorials lower the entire curve which I read actually is a overvolt since you make the system use more voltage overall or something

[@ashisace921]

Panjno I would give you a kiss, I have been undervolt and using msi afterburner wrong for years

[@Konkel529]

Really good guide, might try it when i have time - seems good thing to do on all builds.

[@Pootch17]

Thanks, this is the best video I've found about undervolting. Interesting is, that afterburner is always slightly above the Voltage I have setup. Why? When I set 925mv, it works at 930-935mv.

[@LeoTheJust]

This video is legit guys. I used the first method to undervolt my gpu managed to decrease the temp from 91c to 65c(l use RTX 3060) If anybody has question you can ask.

[@gordon.3613]

where did you find gpu voltage in the monitoring tab? Can't seem to find it

[@LeoTheJust]

​@@gordon.3613 You can't find the voltage menu from the MSI?

[@gordon.3613]

@@LeoTheJust Yep on MSI afterburner.

[@LeoTheJust]

​@@gordon.3613 You should be able to find the voltage menu on the left side of the screen, next to the clock and fan system. If you still can't find it, try changing the user interface in the settings. It's possible that your current interface is hiding the voltage menu. Personally, I use the default interface.

[@gordon.3613]

@@LeoTheJust alright I’ll try that then.

[@OneBrokeBloke]

7:39 this does not work for me

[@MəlikzadəHəmidə]

thank you for the super content 🙏🤝

[@lumyx3011]

For anyone who can't see their voltage, the graph still works and they should just do trial and error.

[@CesarMartinez-er3vo]

I used HWinfo to see the voltage of the GPU.

[@andi_Rider]

gracias por el video me ha sido de mucha utilidad siempre sufria con las temperaturas en mi laptop que casi rozaban los 90 C ahora no supero los 78 C muchas gracias