How To Update Toyota Entune Audio System Software - Toyota 4Runner Radio Firmware Update

In this video I show you how to update your Entune audio system firmware or software.
UPDATED Firmware website: (MUST ENTER VEHICLE VIN FOR IT TO WORK): www.toyota.com...
Flash Drive: amzn.to/3alDREx
Amazon Affiliate Link
WATCH NEXT:
4Runner Rear Differential Fluid Change: • How to Change Rear Dif...
4Runner Transfer Case Fluid Change: • How to Change Transfer...
4Runner Coolant Top-off: • How to Check and Fill ...
Music Credits:
Last Summer by Ikson: / ikson
Music promoted by Audio Library • Last Summer - Ikson (N...

[@atomicorang]

Entune is the lamest ever.. an embarrassment to Toyota.

[@adammtucker]

Thank you so much for the video! I was having issues with my 2015 4runner's display intermittently freezing/rebooting, and when I went to download the update, the newest update claims to fix this issue. I was able to install the update following your video and hope to see the issue has been fixed in the next few days!

[@5MinuteFixit]

I was having the exact same issue and so far hasn’t happened since the update! Thank you for watching and please consider giving the video a thumbs up if you haven’t already! Thank you!

[@n1kkri]

Thanks for this. I just put the software update on my flash drive and started reading the instructions. You cleared up some confusion I had with their instructions as written. I noticed you inserted the USB flash drive right after starting the car. The instructions have you start the car, go into the menu and slect Setup, software udpate, then insert the flash drive.

[@n1kkri]

I just finished the software update. Worked 100%. Hopefully in my case it will improve Android Auto performance.

[@5MinuteFixit]

Thank you for watching, I’m glad it was helpful and you were able to update the system! Please consider giving the video a thumbs up if you haven’t already! Thank You!

[@vauxmoto9096]

Solid video man. Stealership wanted $150 to do this.. lol

[@5MinuteFixit]

Wow $150! This should be done as a courtesy. Thank you for watching! Please consider giving the video a thumbs up if you haven’t already. Thank you!

[@vauxmoto9096]

@@5MinuteFixit i agree, especially since I haven’t even owned the vehicle 2 years yet.. definitely liked and subbed!

[@Michu507]

They wanted to charge me $150 just to check what was the issue 😒...

[@debbiechilds9864]

Thank you! Just updated my 2015 Highlander.

[@5MinuteFixit]

That’s great! Thank you for watching and please consider giving the video a thumbs up if you haven’t already! Thank you!

[@hassanbakkali3785]

I have a 2014 hybrid highlander with no issues with the head unit. Is it still better to update it ?

[@jimward8366]

great instructions, had never updated it, thank you so much

[@5MinuteFixit]

I’m glad the video was helpful! Thank you for watching and please consider giving it a thumbs up if you haven’t already! Thank You!

[@dixiechic60]

Thank you for this. I paid $60 for Toyota to supposedly download this but didn’t fix my problem. It shows the update but it doesn’t show the date, so assume they didn’t completed it properly. If I do this and repair it myself, I will be asking for my money back. 🙁. Thank you!!

[@5MinuteFixit]

dixiechic60 I’m surprised they charged you for this most people I’ve heard from were getting it done free of charge. Hopefully this works for you! Thank you for watching!

[@dixiechic60]

@@5MinuteFixit He wanted to charge me $100 but it was my birthday. :(

[@5MinuteFixit]

Did you end up doing it yourself?

[@dixiechic60]

@@5MinuteFixit Not yet, I cannot get access to the link. I don't think I ever registered my car on the Toyota website. Struggling trying to get a download.

[@dixiechic60]

I still haven't been able to fix the issue. I cannot log into Entune, it will not accept my VIN when I try to set up entune app. And when I try to download the software update from Toyota and download to a thumb drive, my car does recognize it on the thumb drive. I spent an hour with Toyota corporate yesterday, they couldn't help me either. Going back to dealership, corporate said my software is not the latest. I appreciate all your attempts at helping me!!!!

[@osvaldo3457]

Hello, I have a 2016 corolla with a 100571 and I tried to update it, it recognized the update and I gave it the update, it took a long time from 8/12 and it never finished. After more than two hours, I found my radio turned off and it doesn't turn on at all.

[@GrowingUpWithTheMacks]

I have a 2015 Toyota Highlander and it didn't work for me. I followed your instructions from start to end. I called the dealership and they said the head unit is likely going bad, but he agreed to attempt to perform the necessary update for $300 plus tax!!! Not sure what to do.

[@marysullivan7002]

How would i do this if the display won’t fully load? Like when i start the car it just goes to a loading screen that stops at 90% and restarts

[@5MinuteFixit]

That may be a bigger issue than the update will fix…maybe others on here can give their insight on whether or not this will work for you.

[@artakharutyunyangmail]

Hello, my radio does not turn on, only the download is in progress, I think the firmware has flown, can I turn on auto update somehow

[@Tactical_Shenanigans]

Good job buddy thanks for everything

[@halalboyseif]

I have a toyota camry 2014 and it is the non navigation version. If you know, can you please tell me what the "Setup" and "Car" buttons do? Scared to try them out 😂.

[@mikeymop]

What format is your usb drive? I've tried FAT, FAT32 and exFAT but the headunit doesn't detect the update file on the drive.

[@5MinuteFixit]

Are you using a Mac computer? If so the usb needs to be formatted in exFAT or FAT32 this can be done in the disk utility. Make sure there is nothing important on the usb before you format it because I believe it erases everything. Then redo the process. Thank you for watching! Hopefully this helps!

[@awolfe3605]

I am having the same issue.

[@5MinuteFixit]

@@awolfe3605 I had to try this a couple different times to get it to work…it’s kind of a frustrating way to update. I wish Toyota had a better way.

[@awolfe3605]

@@5MinuteFixit so I should just keep formatting it until it does?

[@5MinuteFixit]

@@awolfe3605 are you turning the vehicle on in the correct sequence?

[@1bobbylarue]

I'm on it... thank you!!

[@5MinuteFixit]

Thank you for watching, I’m glad it was helpful! Please consider giving the video a thumbs up if you haven’t already! Thank you!

[@freecommercial]

Will this fix the calibration issue? Wherever I touch it think it’s to the left a bit

[@5MinuteFixit]

Just saw this comment…I’m not sure that it will help that issue but it wouldn’t hurt to try, let us know if it fixes the issue if you decide to do it. Thank you for watching!

[@bowtiedbigcat9484]

Hi - Have you heard of the 4Runners having an echo issue when making phone calls? I already unpaired and repaired my iPhone multiple Times. Also installed the latest iOS software and I am clueless. Toyota can’t seem to fix it. Might have to try and update the software on the head unit and see if it helps. Thanks for sharing!

[@natashafleet1710]

has anyone had any luck getting CarPlay on an older screen I have a 2014 Toyota Camry hybrid and I would love to update it to an OS that has CarPlay which it has Bluetooth so I don't see any reason CarPlay wouldn't work

[@larrysikkema4634]

Does this fox touch screen issues?

[@Auto-Leader]

That link unfortunately doesn't work(

[@pammorris5918]

I have 2014 SR5 did this step by step.........but it did not show update when i put thumbdrive in usb???

[@saruulsanaabyambatsogt2265]

Having same problem here... any solution did you get?

[@KaranKumar-zn6vr]

i cant find prado option ? is it named something else in your country?

[@5MinuteFixit]

Our Prado is the Lexus GX460 in the states but I’m not sure that update will work. I think your best bet would be to find the Toyota update website for your country and search there for your vehicle. Thank you for watching

[@abreus21]

This fixes the audio blur problem when putting it in bluetooth mode? that is, when I put a video on KZbin when listening to the audio, it does not match the video. anyone know how to repair this?

[@5MinuteFixit]

The audio delay still happens when my phone is connected, this seems to only help with the random freezing and shutting down of the radio system. Thank you for watching!

[@MrSoloLoco367]

I've always had this same issue as well and I can't find an update for my stereo system anywhere online. It's like all the files have disappeared and nobody can help to upload my specific vehicle stereo software at all. I have a 2014 Toyota Rav4 with the Entune system, no navigation or anything special. I've had to resort to using an app on my phone that let's you set the latency for bluetooth. Hopefully someone can help with this issue

[@SandyRose-xl7we]

Just my luck. My 2014 Avalon is not on the list. It starts at 2015.

[@5MinuteFixit]

Oh no, did you try it by the VIN number? Chances are you will probably get the same result but it might be worth a try! Hopefully this helps! Thank you for watching!

[@frankie1136]

I'm on the site and put in the proper model info for the car and i hit go. Nothing happens and i cant find a download.

[@frankie1136]

nvm I figured it out. for some reason when I used the VIN it messed up the process

[@5MinuteFixit]

Thank you for letting us know, that way others with the same issue will know to use the make and model if the vin number isn’t working.

[@austinburgos6517]

I downloaded the update on a 128gb flash drive and it’s not showing up on the radio. Do u think the flash drive is too big? And I need a 4gb

[@ps139b5]

What about a 2012 Camry SE?

[@5MinuteFixit]

Should work just have your VIN ready for the website.

[@sickzoom]

How did u add ur pic to the screen??

[@5MinuteFixit]

I have a video for that, thanks for watching! : kzbin.info/www/bejne/qoXTdnaAab-Vprs

[@mathewfoley1531]

So what's the advantage of updating 2018 rav4

[@5MinuteFixit]

This update usually fixes any freezes or random shut downs that you might experience.

[@eduardocastro1153]

does this update work with an entune NO navigation unit in a 4runner 2014? thanks

[@5MinuteFixit]

It should, you could look to see what version you have and compare it to what update is available. Thank you for watching!

[@dorkaholic1]

Does this recalibrate the screen? 🥺

[@5MinuteFixit]

I believe there is a setting to recalibrate the screen, this update may help to resolve some of the issues or at least get you to a better starting point. Thank you for watching and please consider giving the video a thumbs up if you haven't already, thank you!

[@Maxim.Teleguz]

If I don’t have navigation and say with. Will it add it to my car?

[@5MinuteFixit]

No I don’t believe so, thank you for watching!

[@Maxim.Teleguz]

@@5MinuteFixit it would be great to try it.

[@5MinuteFixit]

@@Maxim.Teleguz and if nothing else at least your entune will be updated. Thank you for watching!

[@venza907]

no update on my 2016 4runner?

[@5MinuteFixit]

Good news that means your entune software should be up to date. Thank you for watching!

[@THETIMETRAVEL3R]

There is some benefits of it?

[@5MinuteFixit]

The issues that I had were Bluetooth connecting issues and also the whole unit would restart randomly and lose settings. This update fixed those issues. Thank you for watching, hopefully this helps!

[@THETIMETRAVEL3R]

@@5MinuteFixit i don’t have any issues, it works really good, nice sound, no lag, well calibrated and never have been updated 😅

[@smallnuts2]

I have a 2020 ORP 4runner. My navigation gets me close to areas but instead of saying on left or right. It will say you reached your destination. Is there away to update that? Im in the city and roads have 3 lanes.

[@5MinuteFixit]

I don’t think there is an update that will address that. It seems that some of the mapping software that these systems are based on will only bring you to a point on a road that the address is located at. Hopefully this helps! Thank you for watching and please consider giving the video a thumbs up if you haven’t already! Thank You!

[@ramazzakariadze5085]

I have a question: is it possible to upload another firmware, for example, if I have a 2016 car and upload 2018?

[@5MinuteFixit]

Yes it doesn’t matter what year your car is much like a cell phone that gets updated after you buy it. Hopefully this helps, thank you for watching and please consider giving the video a thumbs up if you haven’t already! Thank you!

[@ramazzakariadze5085]

@@5MinuteFixit thanks

[@ramazzakariadze5085]

2016 and 2018 toyiota Sienna has different audio model

[@Markosschnitzel]

no kluger on the list

[@j-dubz2349]

This website doesn't work. Not even the updated one in the comments

[@RRPBJJ]

thanks man! nice and easy! My 2016 hadnt been updated ever! So starting off 2023 with a fresh update! yeah baby!

[@5MinuteFixit]

Nice! I’m glad it was helpful and you got the update! Thank you for watching and please consider giving the video a thumbs up if you haven’t already! Thank you!

[@5MinuteFixit]

Updated Firmware Website (MUST ENTER VEHICLE VIN FOR IT TO WORK): www.toyota.com/firmware-updates If you need to pick up a thumb drive: amzn.to/3alDREx *Amazon Affiliate Link* Thank you for watching my video! If you found this video helpful please give it a THUMBS UP 👍 and consider subscribing! THANK YOU! I appreciate all the support! SUBSCRIBE HERE ▶︎ kzbin.info/door/8BzgKWkH0AGzCOORKK7Vwg

[@armanshahid501]

My question is that I've downloaded it for my Toyota Avalon 2014 . But , the installation package stuck at package 1 of 8 and now it's stuck in software mode . Some says it's iso file . So , I tried to use iso burner and then zip files but nothing seems to work and I don't know how to get out of update mode because my backup camera doesn't work anymore .

[@jimpie231]

@@armanshahid501 Try googling the answer. Jim

[@MissLilRedRooster]

This was SUPER helpful! I just upgraded my 2004 4Runner to a 2014, and didn't have the middle fancy console, obviously, and some of the bugs in the system were driving me nuts. Super helpful, thank you!

[@5MinuteFixit]

That’s great! I’m glad it was helpful! Thank you for watching and please consider giving the video a thumbs up if you haven’t already! Thank you!

[@kaseywaller6116]

Did you see any issues with updating it to a much newer version? I am thinking about updating my 2018 to at least 2020 but i am not sure if it would even work or be compatible..

[@m.d.t.8389]

@@kaseywaller6116 I want to do the same...there is no 2019 update so I was thinking of going one year up to a 2020 update

[@5MinuteFixit]

These updates should work fine with your vehicle. I wouldn’t worry about jumping multiple years. Thank you for watching!

[@artdeleon5829]

If I cant get to your setup screen?

[@mikebeley5872]

any way of updating maps?

[@Jerry4050]

I did an update just using my bluetooth with the Toyota app on my phone but its really making my Apple Carplay glitchy now. Its a 2019 CHR by the way

[@caito.3521]

I tried to update through bluetooth but it didn’t work… (Australia) how did you do it?

[@paulrondeau9998]

Thanks for the info, it worked perfectly and got the bugs out of my system!!

[@5MinuteFixit]

That’s great! I’m glad it worked, thank you for watching!

[@SelloChibo]

Hello good sir my 2018 Toyota rev4 operating system in 0715 and I was asking if it needs to be updated

[@Sellosc]

Hello good sir my 2018 rev4 operating system 0715 and I was wondering if it needs to be updated

[@kghomes8125962]

Update I had no luck with software update as the existing was current I got a new head unit and my 2014 4Runner still reboots randomly, any ideas would be greatly appreciated!!!

[@safeer233]

Why i couldn't find fortuner in that list ?

[@5MinuteFixit]

There may be a country specific website that would have that in the list.

[@Stribman]

My 2013 crolla is made in Canada updates for us cars only?

[@skfcs860]

NO HILUX IN LIST

[@boong0006]

Now in 2023, I just updated my 2015 toyota avalon hybrid media software. Thank you . I struggled for a few times reformatting the usb drive. Finally it worked!

[@5MinuteFixit]

Thank you for watching, I’m glad it was helpful! Please consider giving the video a thumbs up if you haven’t already! Thank you!

[@lindamarquette7351]

The latest firmware I saw was 2017. Is that correct?

[@kellygrudowski3259]

I really appreciate this video. I did everything you said, made sure my flash drive is formatted correctly, inserted the flash drive into my 2014 Rav4 and nothing happens. I did it again using a different flash drive and still nothing happened. Do you have any suggestions? I'd really appreciate your input.

[@5MinuteFixit]

I believe there is a limit to the size of the flash drive that the vehicle will recognize I believe it is 16 or 32GB. Let us know if this helps! Thank you for watching!

[@jessicaanaya9528]

@@5MinuteFixit DOES THIS MEAN IT WONT READ A 32GB DRIVE ?

[@65_T-Bird]

Thanks for your 'Informative' straightforward presentation 🙂

[@5MinuteFixit]

I’m glad you were able to fix the issue with the help of my video! Thank you for watching and please consider giving the video a thumbs up if you haven’t already! Thank you!

[@nancyd1432]

Do you know how to fix it for a 2013 Venza?

[@forwork5458]

My 2019 rav 4 stereo will not update

[@grokkrok3717]

Very easy to understand your tutorials.

[@5MinuteFixit]

Thank you for watching, I'm glad it was helpful! Please consider giving the video a thumbs up if you haven't already! Thank You!

[@ifern4545]

Thanks for this, just updated my 2015 4Runner. Sweeeeet.

[@5MinuteFixit]

That’s great! Thank you for watching!

[@I9nzo.]

⭐️⭐️⭐️Hello, can I download the 4Runner update for fortune 2018? Thx 🙏

[@jimpie231]

Thanks......! Very informative! Jim

[@jessicaanaya9528]

I formatted my usb drive and copied the download to it and followed the steps and it’s still not even reading my usb on the vehicle (2015 4runner ) Help !!:(

[@mohammademami-y6j]

My Toyota Avalon 2013 car after starting the Bluetooth system, GPS, radio are completely normal and work, they work even for a few hours when the car is on, but after stopping and turning off and starting again, they stop working and until the start They don't work the next day

[@concordianjoe2256]

Just did this update on my 2017 Tacoma and now screen freezes on the start up screen, thankfully the back up camera still works. Has any one had this issue?

[@slipknot2k4]

cant seem to update to 1010 my current one is 1008 i entered the vin number. i probably need to wipe out the flash drive have it empty or try another flash driver probably because its usb 3 im gonna try again later and update for my corolla 2020 LE

[@peterdobol6662]

Thank you for this information. Unfortunately my touch screen is unresponsive. Any way to get around this?

[@kuruptkev]

Got a 2013 and my radio doesn’t have update option what do I do

[@ashleyfreeman5146]

I have a 2013 rav4, went to the toyota website and it only goes back to 2014. If I use that update will it mess my stereo up?

[@adriangallegos5042]

Hey i just follow all the steps and everything went good until the last part where you it say park and turn off vehicle the start it back then it got froze where it says check sorrounding?? Can you help me?

[@badb1lly80]

Hey your screensaver is Oregon inlet in the OBX my home!!!

[@5MinuteFixit]

That’s great, love that picture! You’re lucky that you live there! Thanks for watching!

[@haydencanfield6984]

Just went there yesterday for a fishing trip saw someone catch a 600lb tuna

[@lefikashapi]

Greatings I have a Fortuner 2019 from South Africa, with the multimedia model ID as 17TDT1ZA-CA02 on version 1111. Would it be possible to update software so that my unit to support Android Auto and Apply Car Play? Thank you in advance.

[@rougemontcephora4766]

hy i just receive my new rav4 hybrid 2020. i live in israel and apparently the unit multimedia jbl dont show me or not opening the wifi. so i can not link my key sim or my mobile to the systeme. there is a solution that my unit can see all the wifi around it? yhanks for your respons.

[@moeenzachariah]

I own a 2013 4Runner LIMITED with navigation, I didn't see any option on the toyota site for 2013... Do you think I can update still? Curious, what year is your 4Runner.

[@5MinuteFixit]

My 4Runner is a 2014 Limited. If you check the site with your VIN number it will be the most accurate in terms of telling you if there is an update available. Hopefully this helps, thank you for watching! Please consider giving the video a thumbs up if you haven't already! Thank you!

[@PAYDKBABY]

Wow my 2019 Toyota Corolla doesn’t have a update or apple CarPlay

[@elmaauto1476]

Sir my car player nszt y 64t .language Japanese .player update video Please sir

[@petraselah7152]

Well this work for a 2016 Toyota Camry?

[@5MinuteFixit]

It should just be sure to have your VIN handy to plug into the website. Thank you for watching!

[@Endorphins27]

tried ane did this for my rav4 2017... Still says Bluetooth is initializing..... Shoot me

[@5MinuteFixit]

These systems are very frustrating sometimes, did it seem like it updated?

[@Endorphins27]

@@5MinuteFixityes! very frustrating i just bought the car and it does not work. I unloaded and updated the software but I don't notice any difference nothing that helps. i dont get it.

[@5MinuteFixit]

@@Endorphins27 the only thing I could suggest is maybe go through the update process again to see if something changes! Thank you for watching even though it didn’t help you.

[@Endorphins27]

@@5MinuteFixit yeah I’ve been threw it a few times now and unfortunately it still says it has trouble initializing Bluetooth. Annoying to but a new car and something as basic as Bluetooth doesn’t work. I know 2009 model cars with see less Bluetooth my god! Arrrggg so damn aggravating what a waist of time been a couple hours of reading and running around downloading crap like a jackass to no avail. Thanks for your help, good channel. Hope all is well.

[@Endorphins27]

@@5MinuteFixit I am using a Mac could that be the problem?

[@joseandrades6646]

Does this work for Toyota Tacoma 2015??

[@5MinuteFixit]

Yes it should, just make sure when you download the update it is for the Tacoma. Thank you for watching!

[@markinpdx7345]

Thank you for this video! I have a 2018 Rav4 and the display/ blue tooth started having issues. This update should be the fix I need!

[@5MinuteFixit]

Thank you for watching, I’m glad it was helpful! Please consider giving the video a thumbs up if you haven’t already! Thank You!

[@silverynight1548]

Thanks for sharing this,pretty straightforward but I can't seem to find "software update" option on my 3014 rav4 for some reason. I checked under the " system information " there isn't any also. Do you think this is normal ?

[@5MinuteFixit]

Did you happen to check using the VIN number option?

[@bossmanham]

Does this update the navigation map as well?

[@5MinuteFixit]

This does not update the map....that is located on the micro as card that is inserted under the micro sd logo on the head unit. Thank you for watching!

[@mmallow6481]

UGH... the website says there is no update for my 2015 4Runner? Apparently they want to charge for it or have me go to a dealership! :(

[@5MinuteFixit]

Did you try by typing in the VIN number?

[@Johnnyag73]

Can’t understand you. Ya talk kinda fast. Are you starting the car before installing the update or just putting it into Acc mode?.

[@5MinuteFixit]

You just need to put it in ACC mode. Thank you for watching, hopefully this helps!

[@manikrishna01]

In Toyota camry 2016, On selecting firmware update, software update button is enabled but the popup - "The new software is..." not showing up. Any suggestions pls?

[@5MinuteFixit]

Are you using a Mac computer?

[@mrammiygill2349]

Hi Sir I hope u r well I have Toyota Tundra made in Kentucky 2016 I have already install Navigation in LcD but my location Oman I can't access map of Oman so tell me what ii do to connect Navigation of oman... I only have installed GPS USA or Mexico but I need Oman App

[@mrammiygill2349]

Plz help me sir can I coonect my phone with car GPS if u know any app then give app link please

[@g2t]

I only get an .iso type file when I download from Toyota. Tried that but no worky.

[@g2t]

Ah - manual says FAT32 format on the USB. I re-formatted as FAT32, put the .iso file on the USB and it worked w/ my 4Runner. It's a 2012 if that helps anyone...

[@5MinuteFixit]

Thanks for letting us know how you were able to get it to work, this will help others with the same issue. Thank you for watching and for the extra tip!

[@BRAR-rz9wo]

Hi , I have got new Update for my car Toyota camry but it doesn’t recognise from USB. it shows nothing. whats problem?

[@TheCarissaLiz]

i have this issue too

[@Zytron]

Does the USB drive have to be plugged in for the software update option to even appear in the settings? It doesn't appear for me. I'm using a 2013 Camry. There's only 3 options in general. Language, beep on/off, and Delete personal data.

[@5MinuteFixit]

Yes it has to be plugged in for it to show up on the screen.

[@Zytron]

@@5MinuteFixit The oldest year on the website for the Camry is 2014, and when I use my VIN number to select the 2013 Camry, it says there's no update available. Is there anything else I can do? Do you think it's ok to use the 2014 Camry update instead?

[@5MinuteFixit]

I wouldn’t try, and the 2014 update probably won’t show up on your screen. Have you been having issues with the infotainment?

[@Zytron]

@@5MinuteFixit Yes, the computer looks like it's constantly crashing and restarting. When it does stay on, very few screens are accessible. The "car" screen that shows information about your trip works, the "audio" screen sometimes partially works, and the "apps" screen will attempt to show up but will crash the computer the instant the apps menu loads, sending it back into a loop of restarting constantly. I can always get to the startup screen via a physical button above the screen. When I go there, the "Bluetooth" and "Phone" options don't work when you tap on them, they just beep acknowledging you selected them, but they don't open.

[@5MinuteFixit]

@@Zytron I guess with the issues you stated it may be worth trying the '14 update although it may not let you. let us know if it works and how it turns out if you end up doing it! Thank you for watching and please consider giving the video a thumbs up if you haven't already! Thank you!

[@hunterhryciuk3964]

Just performing an update for a 2015 Toyota camry radio

[@5MinuteFixit]

Thank you for watching, hopefully this video was helpful!

[@andrewh3730]

Will this work on Rav 4 where it has a repeat looping of the radio?

[@5MinuteFixit]

This is usually a good place to start. If this doesn’t work at least you will have the latest firmware installed! Thank you for watching!

[@shellh.5193]

Will this work on a 2019 Toyota Camry?

[@5MinuteFixit]

Your best bet is to go to the website listed and enter your VIN number to see if there is an update then go from there.

[@madonnaanderson6488]

Question. If not currently having any issues, is there a benefit to installing the update?

[@5MinuteFixit]

That’s really up to you…maybe wait and if you do sometime down the road do the update then. Hopefully this helps, thank you for watching!

[@franciscocisnerosjr7101]

Can it be any Sandisk cruzer glide usb flash drive model ?

[@5MinuteFixit]

Yes that should work. Thank you for watching!

[@franciscocisnerosjr7101]

@@5MinuteFixit will it work on a 2013 4runner

[@kghomes8125962]

Can you share what prompted you to update ? Did the radio malfunction ? My is blacking out then start up in 2 seconds and has done it several times just got this 2014 4 runner used

[@5MinuteFixit]

That is the exact issue I was having on my system...it would freeze up and then randomly reboot. If you end up doing the process let us know how it turned out and if you are using a Mac make sure the thumb drive is formatted in FAT32. Thank you for watching! Please consider giving the video a thumbs up if you haven’t already! Thank you!

[@kghomes8125962]

@@5MinuteFixit just tried to update appears done already current 0101D8 is on my unit before I tried to install update yet my 4 runner keeps doing it and it caused an engine stall in traffic had to coast into gas station. Any ideas? Good info definitely subscribe

[@5MinuteFixit]

The engine stall shouldn’t be caused by the radio malfunctioning, maybe an electrical issue with the whole vehicle. My 4Runner has a recall for the fuel pump that could cause the engine to stall. You should look into any recalls for your 4Runner. Thank you again!

[@kghomes8125962]

@@5MinuteFixit thank you , I did log in to Toyota with my VIN and history shows fuel pump recall and replacement,also the update performed because customer complained of radio issue , however problem still exists,wish I could have seen this before buying guess I see where car lot got this car from auction thanks for all your help again

[@241eric]

Does this fix the dropped call issues which seems to be a major issue with this stereo?

[@5MinuteFixit]

This update may fix those issues...my issue was that the audio system would randomly freeze up or reboot. It fixed those issues for me. If you end up doing it let us know if it was helpful for that issue. Thank you for watching!

[@하신무시타파]

can you add more language ..? I want Arabic language to add

[@5MinuteFixit]

I’m not sure that you can add a language…maybe someone can respond and answer this question. Thank you for watching!

[@하신무시타파]

@@5MinuteFixit Thanks

[@roltol7539]

do you have a link for EUROPE toyota ?

[@5MinuteFixit]

Im sorry I don’t have that site if I find it I will let you know.

[@sullyml1]

Hey man, the radio doesn’t seams to recognize my 16gb flash drive, it’s a sand disk (FAT32) any recommendations ?

[@5MinuteFixit]

That’s interesting, I would suggest trying it in exFAT format. Let us known if that works so others that have this problem can be helped. Thank you for watching!

[@awolfe3605]

@@5MinuteFixit i am having the same problem i formatted it to the exFat and still wont recognise it.

[@Mark-bh8zo]

@@awolfe3605 Any luck on this? I have this issue and can't figure out what to do. Tried three separate USB sticks and multiple downloads. Still no luck.

[@awolfe3605]

@@Mark-bh8zo honestly I gave up I tried too many times.

[@Mark-bh8zo]

@@awolfe3605 Dang..ok.

[@fishinginthedeep940]

Why isn’t Hilux an option?

[@5MinuteFixit]

I believe this website is only for US vehicles, we don’t get the Hilux here (unfortunately). Which country are you in?

[@christyhogan5948]

I tried this and nothing showed up for NEW under the update. Any suggestions? When I look in update history nothing is there.

[@5MinuteFixit]

Christy Hogan are you using a Mac computer? If so the usb needs to be formatted in exFAT or FAT32 this can be done in the disk utility. Make sure there is nothing important on the usb before you format it because I believe it erases everything. Then redo the process. Thank you for watching! Hopefully this helps!

[@christyhogan5948]

No, using a Dell computer. Downloaded the update onto USB and retried it several times but no luck.

[@5MinuteFixit]

The only thing I can suggest is to make sure the usb is completely blank no folders or anything, maybe just erase totally and reformat.

[@tomashoward2095]

@@5MinuteFixit Sweet! This was the trick I needed... I wasn't getting the 4Runner to recognize the USB Drive until I reformatted it to FAT... Thanks!!! You're Awesome!!

[@5MinuteFixit]

Tomas Howard glad you found it helpful! Thank you for watching and please consider giving the video a thumbs up if you haven’t already! Thanks again!

[@manojvarghese8633]

Hey buddy ehere did you plug in the usb!!! To any port !!!

[@5MinuteFixit]

manoj varghese areeckal I plugged mine into the USB port under the head unit/radio.