Thank you for putting the time and effort in making this video. Really helpful.
@va3sii Жыл бұрын
Appreciate the feedback, thank you. From the start, my YT aim was to help just one person with each video. I'm happy it helped you, thank you.
@GaryHarrison-hm9yr5 ай бұрын
Thank you largely for that video - it answered a lot of questions for me. I’ve bookmarked in and well share with some other “somewhat new to Fusion” folks.
@va3sii3 ай бұрын
Glad it was helpful!
@straightpride4512 ай бұрын
You're so precious. Thank you for the informative video.
@hithere7382 Жыл бұрын
Hi VA3SII you don't have to connect to WiresX to talk on AmericaLInk. It has a YSF reflector too not just a WiresX room and it has a lot more people in it. You can set it as your boot YSF # in PiStar configuration page and it still works to that reflector but not with the wiresx news and other stuff like seeing the number of people in it. But it does work for seeing who is transmitting and for talking and receiving.
@jessechen99239 ай бұрын
I'm quite curious what is "zl3ab" from the intro at the beginning(the morse code)?
@MrRickshoАй бұрын
I have done all that with a pi star hotpsot and ft5d. Pressing the wires x button, I am just not connecting at all
@va3siiАй бұрын
Try changing the mode from dn to d etc. I found one of mine worked and one didn't. Plus you have to wait for when no one is transmitting
@MrRickshoАй бұрын
@@va3sii well I will try that..
@thomashardy9994 Жыл бұрын
That was helpful. Looks like a lot of options available using a hot spot. Will it work using any Pi hotspot? Thanks for the video.
@va3sii Жыл бұрын
I believe so because thats in the OS part right...
@thomashardy9994 Жыл бұрын
Hello. Just wanted provide an update. I got it to work thanks to your video. On watching it again I noticed that I did miss an important part initially, pressing the back button when the “news” page came up.
@va3sii Жыл бұрын
Fantastic. Pleased it helps. Lots of fun to come then now you cracked that
@yoerim3609 ай бұрын
how long does it run on the power bank?
@va3sii9 ай бұрын
Of course the answer is how big the capacity of the bank is. I get two or three days out of mine before I recharge. But it's not flat at that point.
@k9wlwradio309 Жыл бұрын
Speaking of crossmoding with the Wires-X button, here is my crude video demonstration of setting up for YSF, YSF2DMR, YSF2NXDN, and YSF2P25 all turned on simultaneously and using the Wires-X button to hop from network to network with the Wires-X button. I apologize that my video quality pales in comparison to yours. kzbin.info/www/bejne/rYaZpKaciNSFd5I
@va3sii Жыл бұрын
Appreciate that thanks
@k9wlwradio309 Жыл бұрын
@@va3sii no problem. The DMR crossmoding works quite well and is a great way to also experience DMR without having to buy a DMR radio. I am amazed how it even allows you to store DMR talkgroups with the Fusion radio! The Pi-star folks have really worked hard to add these features!
@ebb732 жыл бұрын
C4FM 재미있조... 온에어에서 봐요 73~
@va3sii2 жыл бұрын
I'm sorry. Your language characters do not disay in the English language. Thank you for commenting though.
@ronbo422 Жыл бұрын
VA3SII de K5RPM. I can get my PiStar hotspot into a room, if I choose one in the config....such as AmericaLink. I can then communicate with other hams in that room. However, when I push the GM/X button on my FT5DR, I get no response from the hotspot. And I make sure to do this when there's no activity in the room. Neither will my transmission show up in the Local RF window, such as when I'm talking normally in the group/room. I really want the ability to change rooms, like you demonstrated with your FT5DR. I followed all of your settings in the video. I even tried with WiresX passthrough ON and OFF. Still no joy. My hotspot is a DVMega dual-band, running PiStar 4.1.6, which I updated versions in 2021 but, funny thing is, 4.1.6 is no longer available on the PiStar.uk website. It's almost as if my hotspot is deaf to that short little digital burst when pressing/holding the GM/X button. Any thoughts/suggestions, sir? Thank you!! Ron - K5RPM
@va3sii Жыл бұрын
I feel your frustration and understand the statement deaf to that burst of data etc. Im struggling to suggest. Obviously it has to be done when the hotspot is not transmitting. Have you tried changing the radios digital bandwidth to dn or away from dn. Cant think right now what else to look for. Good luck with it anyways Ron. Sii VA3SII (now G7HCD) again
@ronbo422 Жыл бұрын
@@va3sii From what I gather, it's likely the radio hat that my hotspot employs, specifically the DVMega dual-band. I can get it to x-mode if I set BM 3102 as the network, and define a room # (such as Worldwide).
@outdoorsmanjohnny9934 Жыл бұрын
Is that a Heil Hitler at the end? lol
@va3sii Жыл бұрын
Nope just a raised hand to say bye. Alls good.
@jonathanandrews3232 Жыл бұрын
As it sits everyone including this the videos suck, No one has shown a step by step on how to get the radio set up for a hotspot, They show the radio after it has already been set up setting behind the hotspot and then they show it's working, You goofy people please take the time. It is made me so mad I am new to ham radio. I do DMR fine., But to try and set up my bought for fusion. I have no concept because all I see is somebody talking about. It has to be set here and it's sitting beside the hotspot show the steps on how you did this, I am sorry if I upset you on how I worded this but I am getting very frustrated. I have already called one company and chew their butt because their videos sucked they just showed a radio sitting beside a hotspot, Please take the time to show on how the radio is set up step by step by step on how you do this Setting up pystar is one thing but the radio you are just showing with it done.
@va3sii Жыл бұрын
Thank you for your kind comments. And may I wish you every success for getting some help from someone other than me after reading that. If you had asked a question constructively instead of that tirade then someone may feel they would like to help you I'm sure. Learn from that. I do hope you get the help because it is rewarding to use.
@PhilBaker1 Жыл бұрын
@@va3sii Thank you for taking the time to make this video. It is much appreciated. 73, KC5UNU
@va3sii Жыл бұрын
@@PhilBaker1 Thank you Phil, appreciated.
@k9wlwradio309 Жыл бұрын
The Wires-X Pass-through is used so you can select reflectors and talkgroups in YSF Crossmoding. Here is a link I found discussing it. forum.pistar.uk/viewtopic.php?f=6&t=1394