How To Use Commutators on BIG CUBES!

[@NixiShavalMusic]

2:50 is where he first does the full alg.

[@benshasta1385]

thank you

[@lisleborger6900]

He literally never works through the whole thing, its dumb AF

[@Crmdy]

@@lisleborger6900 fr allotta useless yap

[@tryhardfighter1833]

Mate. Seriously. I have watched almost every other commutator/countour tutorial out there (including jperms). You are the only one I have understood. Frickin legend u are. Thank you

[@SikoSoft]

You might not have said the word properly, but you sure explain it a LOT better than most videos I've watched on the subject.

[@kabirmaurya1227]

JPerm explains good too but he has not done this on the big cubes only on 3x3x3.

[@jaxonlippman4297]

Thank you so much, I was solving last two center since 11x11 and this was the easiest and best video on it , thanks for teaching me contours hahaha

[@zkmlblc]

You’re the best! How many videos I’ve watched for understanding this but I couldn’t. Finally I’ve really understood the point of the solution. Thank you so much!

[@GrizzMedia]

Glad it was helpful.

[@louismartinetti8819]

This is amazing. It is working very well on the centers of my 9x9. Thank you so much!

[@lbozo3689]

This is the best video out there for commutators, it’s clear and now I know what to do thank you

[@Thomas.Delacour]

Thank you for the best explanation I have come across so far. Brilliant techniques clearly explained.👍

[@51TomasLopez50]

Best tutorial. hands down.

[@rickseroneiii6659]

Thank you so much for this! I've been looking for so long for an explanation for how to do center commutators!!

[@daankentrop]

Thanks so much i was finally able to solve the last 2 centers of my 11x11. Great explanation.

[@GrizzMedia]

Your welcome my man:).

[@leviathan2303]

I got so annyoyed because you freaking moved the cube sooo much I messed up and have to redo my centers on my 7x7

[@GrizzMedia]

Damn my guy that sucks sorry about that. Ill try not to do that next video

[@georgialeksiev8056]

Dude, thanks a lot!!! Your explanation is the best!!! I was stuck for 1 hour, but then I watched your video! Now I can do it. Thanks again, dude!!!

[@GrizzMedia]

No probelm man! Im so happy that this was able to help you :)

[@louismartinetti8819]

your right

[@yishnir]

Fantastic tutorial. Wonderful explanation.

[@GrizzMedia]

thx i appritiate it

[@babymaddy7086]

Thanks for the tutorial, fun and simple explanation for solving the centers of my 7x7

[@SpicyCaramel]

this video is the definition of 'my parents are sleeping i cant talk too loud'

[@bluevia2011]

If I just make one noise then they yell at me

[@Thomas.Delacour]

Hope things going ok now buddy

[@robdacia]

Thank you! Your explanation was clearer than other tutors! Well done!

[@Olectralab]

Thankyou sooo much! I finally solved my 10 by 10 rubiks cube thanks to this tutorial. :)

[@Nikhil-lf7kp]

Thanks for the help man I was literally stuck on this step.Ur video is way more better than other ones out there

[@XxplosiveYT]

bro you got a new subscriber love this tutorial

[@AdilBiju]

Thnx maan.... I saw a lot of tutorials but was not able to understand... This one is lit.... Thnx a lot

[@GrizzMedia]

Your welcome man :). I'm so happy it helped you out :)

[@Awes0meBadger23]

THANK YOU SO MUCH THIS TUTORIAL IS THE BEST ONE IVE SEEN AND IT ACTUALLY WORKED

[@mjustboring]

Thanks bro, you made my day... I was like, why i am not getting it. Now i have the answer the because the videos wasn't explaining well...

[@GrizzMedia]

NP glad it helps

[@yanyanyan25]

showing us how to properly do it is more important that colling it the right name. we all know what it's called we wanted to know how to do it. and you did a great job!

[@HelloWalle]

Thank you so much this was so helpful!

[@gregedel3583]

Dude I had three center corner peices and this helped so much thank you

[@turtles_rl5209]

Thank you thank you thank you thank you thank you I can finally continue my 9x9 after 1 day of trying to do it

[@GrizzMedia]

Your welcome man :) so happy that this helped hope your 9co solve goes on smoothly

[@AlisterCountel]

I ended up using this on a 6x6 Mastermorphinx because I could not for the LIFE of me get my brain to use normal algs on it! Thanks a ton

[@Random-lb1qq]

Very well explained. Great job!

[@GrizzMedia]

Thank you man:)

[@claytontyo9648]

Thank you so much!! You explained this quick and easily and helped me on my 7x7!

[@GrizzMedia]

your welcome im so glad that it was able to help out

[@simplyslay1165]

this amazing you are so underrated mate

[@larugon777]

Thanks so much helped me with my 10 x 10

[@rpcubing5195]

Thanks for this :) I was stuck on l2c on my 6x6 and this helped me a lot.

[@sisisymon]

Thx you really helped me with my 6x6

[@Erovisa]

ty btw i am about to solve my first 9x9 bc of you :D

[@derrickbarnes3126]

I was able to apply this to an 8x8! Thanks!

[@GrizzMedia]

No problem my guy:).I'm glad that it works!

[@aust6351]

Now I will be able to solve ANY cube now 10/10

[@UlscoUns-hm1dn]

Thank you so much, because i was stuck on a 7x7 case. :)

[@hasan973]

Great video, I learn a lot from it Thanks Dear ❤️

[@BelgianSpeedcuber]

Thx for the usefull tips!! You have a new sub :) 👍👍👍

[@aaryantripathidance]

Thanks for the help I am liked and subscribed

[@santrixxuwuxd6581]

I love you thank I finally solve my 10 by 10

[@WritingMyOwnElegy]

BROOO I THOUGHT THIS GONNA BE HARD LIKE 3X3 COMMUTATORS BUT NAHHHHH TYSM

[@Palayedeuhm]

Contours draws me nuts but this video works well 😂

[@xamtplays1933]

draws lmao

[@rubix01]

If you locate the pieces to just one side (I like the left) then you only need to remember one sequence not two. Incidentally, here is a little trick to reduce the 7 move alg for edge flipping: R U R' F R' F' R down to 4. R F' Z R Or down to 3 moves. For a 4×4: R 3Bw' R For a 5×5: R 4Bw' R etc.

[@yingzhou8548]

Thanks for helping me solve my 17x17

[@warau.exe2]

Ying Zhou flexer lmao

[@yingzhou8548]

必陰陽AlexVT no I actually did

[@Palayedeuhm]

This was super helpful though thanks :)

[@jc_haro]

This is awesome, do you mind to do something similar for the commutator of the side pieces, please...

[@jaxtonsimison648]

Corner to please

[@kyliemcgary3063]

Can you do one on the 10x10?

[@Transformergold]

It looks like all big cubes odd or even layers apply the same algorithm to solve those annoying commutators. I been struggling with the last 2 center faces because of not understanding how the commutator actually works. I'm now going to be solving my 7x7 a bit more frequently. So far the best I have done was just a little over an hour

[@GrizzMedia]

Yeah that's the right the same basic method is the same but it will just take more time since there more pieces to cover.

[@armandomelko3266]

does the f direction matter if you are swapping 2 pieces in the middle layer?

[@GrizzMedia]

No it doesn't

[@capt.crunch281]

Dude thank you soo much!!!

[@colig_]

Thank you!!

[@andriskleins2210]

Thanks good video lot better than others our there.

[@石川さゆり-r1m]

Your explanation is good, but I still cannot catch it.

[@GrizzMedia]

Im sorry if ineasnt able to help. Tell me whats wrong i might be able to help.

[@divyashukla6751]

This was way too useful lol!

[@disguisedpanther7933]

Please make a video to show how to swap pieces on opposite sides in a 7×7 please 😌 A very humble request

[@GrizzMedia]

You really shouldn't do opposite sides. It makes the swapping harder. I suggest finishing the opposite side so you have adjacent centers you can swap with

[@dez6145]

@@GrizzMedia I'm still stuck on my 5x5 trying to swap two pieces on opposite sides and your explanation in this reply isn't the easiest to understand

[@sohamgupta9515]

Really helpful Thanks

[@mrudulabhange1628]

Omg tysm frend :)))😊😊

[@rogg0224]

Could you use this to make custom patterns?

[@GrizzMedia]

Yes

[@samicraftch1179]

Thanks bro

[@stevewatson1594]

Nice explanation

[@congress7914]

0:50 it's actually not a swap but a cycle. It's a 3-cycle but you can't really see it because centers only have one color

[@GrizzMedia]

Oh sweet thanks for that piece of clarification man :)

[@congress7914]

@@GrizzMedia no problem! 👌

[@aniketjagtap1746]

Thanks bro,, that's really helpful

[@GrizzMedia]

No problem man. Im happy it was able to help:)

[@cheeseburger5716]

THANK YOU SO MUCH

[@teamaka3087]

Can you just right it down?

[@Cookiefromyt]

What do I do if the piece that I want to move is in the middle?

[@GrizzMedia]

Then you can go either way left or right

[@JacobL25]

What 5x5 do you use?

[@GrizzMedia]

Shengshou 5x5 from 2015

[@hunkacheese.5956]

There is a commutator case where i have to switch 2 center corners on the 7x7, can you help

[@DRWaltonBlacksheep]

Thanks for clearing that up :)

[@GrizzMedia]

Np

[@nubscrub1840]

I think it got patched

[@saintmax8512]

Hey Cubing Bear, I'm trying to follow along , can you actually give the directions of rotation? Saying move it that way is mind messing me up!

[@GrizzMedia]

When changing the direction/determining which F move to use, you want to do it opposite to the side your slice down. If you slice down on the right you use F' if you do left you do F.

[@saintmax8512]

The Cubing Bear Oh yeah, nice. I got it figured out. Lol now I’m so stuck on the last two edges of my 8x8. I wish there was a slower phased tutorial video on solving the last two edges.

[@GrizzMedia]

Ah I see sounds good. I may be able to help on the second part I'll do a video on that soon.

[@saintmax8512]

The Cubing Bear That would be so awesome! Please do. I need all the help I can get.

[@Slowww502]

Thx

[@Madd12880]

This does not make sense

[@crashfrick3466]

I LOVE UU

[@mayyakuksyuk6606]

what's the algorithm

[@hanielzz]

You only show how to move around edges not corners my 4x4 is all done except 2 center pieces i have to redo the cube because of this

[@GrizzMedia]

You dont want to use commutators on a 4x4. It's better to solve them intuitively

[@nacenacenace]

How are you supposed to even know what direction to do the f/u move

[@Jaquarius_permutationovis1]

I’m mad 😡 because I almost scrambled my 11x11

[@w1epicgd704]

I cant do it. I even watched your video on how to solve a 10x10, and I still dont understand it

[@w1epicgd704]

Never mind I got it now

[@br4insful]

you should have done it without saying too much about what happen if this if that. too much water, a beginner gets lost in these explanations

[@ctressc]

When i put communtayor the ato correct put Commnunism

[@GrizzMedia]

lol

[@QuakePhil]

Too much rambling not enough showing, Need to see your hands performed the algorithm multiple times rather than pausing in the middle of the example multiple times Like at 6:00 You’ve already explained this point in excruciating detail before, But it’s still not clear about the middle of the algorithm on the 5 x 5

[@gsutta]

i still dont understand

[@user-om5zk3ex1c]

Subscribe to Grizz media,this video is awesome!

[@samuelAB-j5c]

you went too fucking fast on the 5x5

[@owenzhang1007]

countors LOL

[@champchamp4912]

Quit talking and do the full algorithm in one go. Nobody needs to here your explanation for each turn you do it just messes me up.

[@RubiksBro]

How to swap two pieces on opposite sides using commutators?

[@jimmywastaken1562]

next time dont go so fast pls

[@AdamElwishy]

❤L❤

[@kylekyle2171]

2:56

[@GrizzMedia]

Interesting

[@kylekyle2171]

The Cubing Bear dont mind me I commented this just for myself cuz i dont quiet understand just now and i can access to there quicker.But now I realize its very easy. Nice tutorial!

[@kylekyle2171]

The Cubing Bear btw i am solving a 9x9.

[@arictheposer9765]

It doesn’t work

[@GrizzMedia]

Hmm what seems to not be working?

[@HoverDiglett]

You explained this horribly i found a better tutorial

[@kartikayplaysCHESS]

Can you please share that?

[@clout9266]

Stop talking so damn much

[@Tacotruck_gaming]

This is not helpful

[@hussainkhuraibet2220]

4:03

[@kabir9743]

2:50

[@jancanbek7279]

2:50