Great bit of kit I run 2 SCU 17's one on my ft817 for portable js8/ft8 and in my shack a ft891 for digital modes too. Another thing I did with menus' is select menu 11-05 and swap from MIC to REAR to make radio work through rear ports then swap it back to use SSB or CW normally. Park the rig on menu 16-01 to control pwr and run MTR in quick menu A to watch ALC on TX levels on SCU17. FT817 is bit different to set up you need to run the rig in Dig mode not SSB. Regards vk5cz ..
@texasstealthcamper81392 жыл бұрын
Great video! Thank you.
@Paddy_Roche2 жыл бұрын
Thanks Gary, have a good weekend.
@Martin_Lynch2 жыл бұрын
No problem, the second USB is a pain tho.. Gaz
@tonybowers4653 Жыл бұрын
Thank you for the video. I had installed (& paid) HRD and was setting it up with the 891, awaiting the delivery of the extra box from your company. I watched it once, then had to go back again. You helped me set up by pointing me to what I had forgotten to change. Tony G7NIZ
@raydavidsonm0ray.7772 жыл бұрын
Good Morning all. De M0RAY Sittingbourne, Kent
@stevenkiel6452Ай бұрын
It would be great if you could one featuring the FT450D, mine is being a nightmare to get the settings right in WSJT-X!!
@John2E0GTU2 жыл бұрын
I have this setup to my laptop. I agree about being careful with the pins on the mini-din lead. FSK and PTT do not light up at all. I use a USB hub and it works fine.
@Martin_Lynch2 жыл бұрын
Have you found a way to omit the second USB cable?? as I could not get it to work without it.. Gaz
@andyrussell9162 жыл бұрын
The SCU-17 works with the FT-857 using the Yaesu TTL to serial cable - USB serial and TTL serial are different...
@fotografm10 ай бұрын
I plug my FT-991A and also my IC7300 with a single USB cable into my PC and use WSJT-X. No need for any extra interface boxes. It appears the FT-891 needs such a box plus 2 USB cables. How can we know which rigs need interface boxes and which don't ? I know that my FT-818 for example does need one because of its age.
@MCruzDXer11 ай бұрын
Any other software that is similar to Ham Radio Deluxe?
@yorleyvaldes66222 жыл бұрын
Hi, you are my solution, I was looking around for so many time about a video with the ft-881 and the wonderful SCU-17 to do digital mode with the laptop, I can do FT8 but I don’t have any idea now do CW with the computer and this equipments and how do RTTY if you can help me that will be great, what another software I can use because the ham radio Delux in impossible get it here and the software and radio configuration, I sorry ask you so much but I really need it your hell with this. All the best for you and your family 73s CL7YW from Cuba
@CE4JDM Жыл бұрын
I'm trying WSJT-X on 14.074.000, but each time I TX, my FT-891 transmits on 14.073.500. WSJT-X, SignaLink, and FT-891. Why does it jump down like that to TX? Thanks, CE4JDM
@gratepy1tsp9372 жыл бұрын
Hello and greetings from Rio. It's the same process with the FT450D ? Regardless that we don't have a USB port on the back of the radio..
@Martin_Lynch Жыл бұрын
The Yaesu SCU-17 interface works very well with the Yaesu FT-450D
@artakamiraghyan7698 Жыл бұрын
Is it possible to connect the SCU-17 to a smartphone?
@raydavidsonm0ray.7772 жыл бұрын
Can we have one of these with an ICOM Rig Using DSTAR at some point soon too please? De M0RAY Sittingbourne
@Martin_Lynch2 жыл бұрын
OK, I've added it to the list, all the very best, Gaz
@MrBracey19702 жыл бұрын
Morning All .Simon B- 2E0HFO
@okhouri Жыл бұрын
I'm afraid that you skipped all the difficult bits. These include setting up the data mode and the filter width!
@cornelis81682 жыл бұрын
Completely missing in this video is: a) Installation of the SCU-17 related drivers, b) second USB cable is not preferred (avoiding yet another ground loop), as serial cable (opto coupler is inside SCU-17) can be used instead, c) earth loop de-coupling opto for the USB cable is not discussed, d) there are much better free of charge programs for FT-8 mode like JTDX and the fact that that the bandwidth of the SCU-17 unit is designed for RTTY but actually too limited for FT8 mode... A real pity!
@Martin_Lynch2 жыл бұрын
I totally agree, however I could find no easy way for it to work another way, if you know how it is done I would be grateful if you could email me support@hamradio.co.uk.. cheers, Gaz
@CheLetton2 жыл бұрын
Don't you mean data modes and not digital modes?
@Martin_Lynch2 жыл бұрын
Semantics Che, no confusion intended, feedback received loud and clear, kind regards, Gaz