How to use HHD 32 - 56 Automatic egg incubator and solve problems? Egg incubation Part 1【4K】

In this video I discuss the best practices to ensure the best possible hatch rate when incubating eggs.
If this video has worked for you and has benefited you, please do not forget to subscribe and recommend the my channel to your friends. Thanks for watching.
www.youtube.co...
Supli Abi facebook: / supliabi
Membership:
/ @supliabi
Shop my merch here: teespring.com/...
Other topics you may be interested in:
Sea World Videos:
• Animal Show
Morel Mushroom Production All Videos:
Playlist 1
• Kuzugöbeği mantarı toh...
Playlist 2
• Kuzu göbeği mantarı ür...
How is Potato Dextrose Agar PDA Media Made?
• Misel Üretimi
Saffron Production All Videos:
Saffron cultivation 1
• Safran yetiştiriciliği
Saffron cultivation and cultivation 2018 - 2019
• Safran yetiştiriciliği...
Red Reishi Mushroom Cultivation:
• Kırmızı Reishi Mantarı...
Mushroom cultivation in the log:
• Kütükte mantar yetişti...
Subscribe free to avoid missing new videos on my channel: www.youtube.co...

[@jasminward9304]

Thank you! You made me understand very easily how to use this machine. I can not thank you enough. That humidity alarm was driving me crazy

[@SupliAbi]

Glad it helped!

[@abdulkassem3229]

My humidity is reading at 73% I can't seem to drop it down I meed it at 50 to 55% can someone help

[@kennethfreeman8042]

I thank you very much for going to the trouble of making this video it has answered a lot of questions for me, the HHD I purchased did not come with directions so thanks again.

[@SupliAbi]

Thank you for watching.

[@cookieboi4449]

I bought one of these. It lasted one month. I had about 24 eggs in it and at about 14 days into incubation I noticed that the power was off.... I checked the grid power and it came into the unit, but no display. I checked all wiring. I took the main board out and probed to find fault, but didn't find any. It has a plc and I cannot check that so I decided to modify the unit by rescuring what I could. I chocked the main board into the bin. I used a timer to control the egg rotaton motor. Six settings of each one minute which will give about 3 turns of the motor. Then I used a thermostat/humidity control unit which is wired up to the heater. So I rescued the box, the fan, the heater, the egg rotating trays. I now have a perfect incubator which keep the humidity to my liking and the temperature between 37.8 and 37.3 degrees. So my costs are approximately: Timer $7, Control unit $20. Cheers.

[@lidiya2526]

Wow, I wish you could do a video of how you did that. I definitely want to try it since I have two incubators.

[@derekgamer352]

Hi! I had bought this and it just seems like the heater in the unit just want to get hotter and hotter does not care what I select for temperature. So if I bought a new control unit how would I set it up with machine??

[@tonytawk718]

This is a very good incubator ,,i have tested it 7 batches ,,, you have to calibrate it ,, you have to sometimes switch the fan to blow away from the eggs .,,, you have to set the max temp to 38c or 39c

[@MrAem2000]

Thank you very much for this video and these instructions. I lost the user manual for my hdd 24 and the incubator kept reaching 38:5 even tho the H8 limit was 38 and the temperature was at 37:6. I was checking settings to see how I can fix it but your video helped a lot. I will get an extra thermostats tomorrow and fix the temps. It costed me heavy but I learnt now. 🥺 had 22 eggs in there last time and only hatched 4 chicks. Now I know the reason was this calibration problem.

[@SupliAbi]

Glad it helped

[@danniporter2442]

My mum said to say thanks so much this was so helpful it was non stop beeping driving us all mad!

[@BN-fy8jy]

Thanks for the great video! The user manual that came with it was unclear from the first paragraph "1.1 Connect the egg turner plug with the control plug"... Your video was more than welcome. Now to see what, if, comes out.. Tic tac tic tac

[@SupliAbi]

Thank you very much for this good comment. I am on 3rd attempt now. First two hatch rate was %50. Humidity is big problem i cant control to rise or less it when i want. If you have problem with humidity empty water channel and add water to side pocket witch is for hold egg try in place. When i fill 4 pocket with water i get 40 - 50 humidity then on lock down i add water to channel rise it to 70 - 80. Dont forget 1.3 Switch on your power source. :D Good luck.

[@AntonioFlores-pe4qy]

I got one like your and I'm using for the first time. Thank you for the tips

[@SupliAbi]

Good luck. Thank you for watching.

[@derekgamer352]

I like you haha. I have the same headache for sure!!! I bought the 64 hhd incubator. When I bought a second thermometer/hygrometer. No matter what it is showing 45°C.. it has a mind of it's own and wants to continue to heat up. I cannot get my incubator to lower it's own temperature.

[@SupliAbi]

Thank you. I had same problem first. I fix it with clean and desolder card. If you have little elektronic knowledge or handy friends who have it i think you can fix it as me. You can find how to disassemble part 5 of this series. kzbin.info/aero/PLr8bn5Tp4PBodO5EHq4HJpfXpn-wr9A2C

[@Moontalibek]

Thank you I also bought headache headache and dead . Thank you for help !!!! I lost a lot of ducklings 🥴🥴

[@donnaperyginathome]

I just purchased one of these. Thanks for the info.

[@SupliAbi]

Thank you for watching. . .

[@Funfood12146]

Can me guide

[@Funfood12146]

Can me guied

[@donnaperyginathome]

@@Funfood12146 Sorry. I haven't used it in a year and it is in storage. Be sure to keep it in the foam packaging that it comes in and keep enough water in it. When hatching, add a wet sponge. This will increase the moisture for hatching. I got good results from it with this method.

[@MaceMeadows]

Thank you so much for this detailed information. I'm getting ready to purchase this model and I'm pretty sure I'll need to follow each of your steps!! :)

[@SupliAbi]

Thank you so much.

[@tressieharzman8250]

Thanks for the video. Very helpful! Will make for much more successful hatching.

[@SupliAbi]

Glad it was helpful!

[@alisallorca]

Thank you!!! I bought the "Headache Hatcher" and your video helped me so much! My incubator seems to be working OK, but I'm having trouble getting the humidity correct. I will be purchasing a hydrometer to put on the inside as well.

[@SupliAbi]

Humidity is really big problem on this incubator. My advice is dry incubate. If you see side of incubator you will see 4 pocket two each side. If you add water in that 4 pocket humidity will go around 45. Until lockdown keep it like that if water finish add more. At lockdown fill two water channel under the plastic mesh. This will rise humidity good enough. Don't forget to cover lid with towel or something like that. Because lid get cold and makes rain from wapored water inside. I lost many chick until i recognize this. Thank you for watching.

[@shahidamin1740]

@@SupliAbi which lid are you talking about?

[@mohdkassim6903]

I have incubator like your it's my first time to use can you tell me what's amount of water needed to be put in that incubator???

[@NessysSanctuary]

You have me screamin in the first few seconds when you said what HHD means I understand your frustration hence why i am here to see if i have these problems when i get mine lol

[@mohamedfall5017]

Thank you from SÉNÉGAL !

[@firerydragon]

Do you know how to reset or change day?

[@dixierose5628]

On these make sure you “calibrate with a seperate thermometer and hydrometer “ read book that comes with it to do this. Mine came and wasn’t calibrated and cooked my lil eggs at 106* while showing 35.7 !! Read updated comment! JUNK! Broke with full incubator!!

[@SupliAbi]

You can see how to calibrate here kzbin.info/www/bejne/m6vInoB5as9_pNE

[@coraelhagg4633]

Thank you for making this video. I can’t believe how crap this machine is but your instructions really helped. I would love to be able to remove some of the trays for the eggs and only have 3 rows. Is this possible?

[@SupliAbi]

Glad it helped. You can left just 3 rows. But if it is led model you have to take off all led from all row.

[@fahrulrosy451]

how many ml of water to set the humidity to stay at 55-60%

[@rider8868]

How to reset day?

[@whab741]

press both + and - for 3 seconds to factory settings

[@ashleykoharski5100]

Thank you for the helpful video! My accurate thermometer says 38 and the incubator says 37.2. How do I calibrate the .8 difference? Would it be -.8 or +.8? Thank you for your help!

[@SupliAbi]

Hi -0.8 will correct it. Every 2 - 3 days you have to recalibrate. Because when embryo grow heat up around. Thank you for watching.

[@kellyoconnor9773]

+8 not -8

[@talhaghaffar5346]

Is it -.8 or +.8 ? Please share experienc.

[@ahsanhaseeb7202]

How to control humidity

[@SamRichards-bf5ib]

Cheers!!

[@wajidiqbal3706]

I have HHD 32s mini & I don't know where to put water, I am confuse because there is hole in lower side & there 2 pocket on each side ,manule don't explain if I get answer I will be great full,thanks

[@azamgill]

Should I buy it? What do you suggest? Thanks

[@LuisLopez-yf3lo]

Better not even the owner manual!!Happened that I just got the same one but is not turning, check the motor directly and it works, any ideas or knowledge on it will be appreciated thank u very much

[@SupliAbi]

Thanks

[@harryzahn2319]

FAN problem. I had it blinking or flashing as well. The display shows fan works, but the fan actually does not. Probably not enough AMPs to get it started. I got to the fan unit and wiggled with the fan while switched off, and when switched on it started to work. Be careful with electricity. If the unit is on and the fan does not turn give it a little push with the finger or a little stick or pencil. Mine started to turn. Solution: Probably buy a new fan, or try to oil the turning mechanism and hope it will work better. I started my with a little stick and the FAN stopped flashing. So the problem is starting the fan to turn, in my opinion.

[@abuahmad4511]

The humidity is high look it’s misty ! It should be at lease 43 to 45 I have a big one 500 eggs

[@traceywhimp8767]

Hi there, Thank you for your video it is helping me so much as I have just bought this machine. I have another temperature gauge inside the incubator just to make sure the temperature is correct or not and you are correct. I have set the incubator to 37.5 but the other temperature gauge inside say 83. What number should I calibrate on the incubator Thanks Tracey

[@hajnalkadrobko-alexa2680]

Thank you for the video! Does calibration 1.4 means that inside temperature was 39,2 C (39.2-1,4=37,8) ???

[@SupliAbi]

Hi Yes but this dosent mean all incubator equals. If you add extra small termometre in you will be save. Calibration is important after one week of the incubating. Because embryos grow and produce heat. When this heat starts you shuld calibrate again. Thank you for watching.

[@nasirijaz0073]

I have that same model But my humidity shows EE E and its blinking. Don't beeping and if i press settings key the humidity show for just an seconds. What is problem plz tell me

[@daniellemorrill4290]

Mine is doing this also Help please

[@mohsinmaqboolranjha]

Thank you so much , i tried so much and failed but with your cideo , now i can handle it ik sure... and the shopkeeper i bought ir from can live.....

[@SupliAbi]

Please cover top lid with towels to don’t allow water collect inner side of lid. After this video i recognize water in there drop to egg and kill chick inside shell. Thank you for watching.

[@IronMan-xq2hb]

Bro did your eggs hatched?

[@DavidDunlop-z6m]

When first start how much water u put in back hole

[@maryk9175]

Hi, thanks for the video. Amyone knows Where do we add water from. Pls let me know.

[@Richard-et3cl]

I just bought this incubator, received it today. Where do i fill water in the incubator?

[@SupliAbi]

Hi please watch other parts of this video you can find in there which i show places.

[@debbieok6600]

Hi thank you very much my incubator dont want get a good temperatuur (stay to low) maybe heater not ok.. do you know how to fix it...thank you very much

[@smang7866]

HHD Headache Headache Dead Is pretty accurate😂😂

[@bklfgang8632]

I can't get the humidity to rise even though I put water inside you can help me please its urgent

[@mariappanmariselvam92]

Same problem bro.

[@bulandpakistan6399]

Same problem bro

[@tharwatqteishat977]

The humidity is fixed to 25% and refused to change yet I made all the settings you said.

[@Wesam_01]

I have a hatcher and the humidity level is not constant. It turns on and off and does not show a fixed number. I am tired and I do not know the problem. Can you help me?

[@timmartin1086]

Thank you so much buddy

[@ontheroadsofdubai]

which incubator will you suggest me for home use?

[@alikamal6876]

Hi thanks for your effort in this video. I purchased the same incubator as yours does that means that it have the same problem as you. Also if i setup it as same as you do will it work. If yes can you give me the exact numbers to put in please?

[@SupliAbi]

Hi No it doesn’t mean yours have a same problem. If it is heat up 45c and don’t go down it is same problem. If your incubator works normal it will work if you setup as I explain in video. There is no exact number. You need extra small termometer to put in side and calibrate your incubator. After few days when callbiration finish you can put egg in it. For more about calibration you can watch part 2 of this video. Thank you.

[@alikamal6876]

Supli Abi thanks, but i still doesn’t quite understand what is calibration and its importance because the machine is automatic and it should do all the work for it self. When the temperature increase the machine should decrease it automatically. Isn’t that right?

[@SupliAbi]

If you put termometer in it you will understand. Factory and your house is different environment. There is no one setting works for all season and places. For this they add calibration mode to incubator.

[@alikamal6876]

Supli Abi Supli Abi so what i understated is that i should put a thermometer inside so that the difference between the temperature inside and what the temperature shown in the machine, i setup the difference in calibration for example inside 38 and machine is 39 so the calibration should be set at 1.

[@SupliAbi]

You shuld read inside temperature. Exemple if inside 39c. This mean incubator heat to much go calibration and set 2. This will tell the incubator it read 2 celcius wrong then it get calibrated.

[@shahidamin1740]

When the actual temperature inside the incubator is 37.5, the LCD reading shows it as 35.5 How to calibrate the difference of 2 degrees ??

[@SupliAbi]

Hi Go CA in setting set -2 then save.

[@mohdkassim6903]

My HHD incubator like your but if I try to set temperature and humidity I can't save changes always temperature and humidity is automatically and temperature is around 36-38. And humidity is around 67-70. Is there any problems there??? If there how I can do to fix it??

[@SupliAbi]

Hello You can save as i explain on video first set temp then push set buton again to save. Humidity is just indicator show how much humidty. There is it no setting for it to change up or down. Add water and start incubator 3 days before you put egg in it. If humidity high empty one water chanel.

[@muhammadyazidgege9501]

thank you

[@SupliAbi]

You're welcome

[@alijahalilovic5511]

Need help my humiditi is on 30 and it dosent go up.or down

[@cinemetic_shorts]

Hi I am from Pakistan and I buy this incubator I face 1 problem to use it this machine make sirens 🚨 after1 hour can you explain me why this machine make sirens voice

[@imtiazali223]

Is this settings for good result of chicks which setting you told in yours this video it will give good result or no i used 3 times but it didnt give me good result of hens eggs when i put it in the machine first time 4 chicks hatch and second time 1 and third time 2 chicks i put fresh eggs of hens whats will be the problem in machine settings or in eggs but the eggs was fresh of hens is this temperature will be for good result which settings you told in this video🤔?

[@SupliAbi]

Hi There is no one best setting for everywhere and everyone. You have to set your incubator in your condition. If you know how to use this incubator it gives almost %100 hatch rate. Calibrate your incubator as i explain in videos. You will get good hatch rate.

[@myktee7132]

Hello am form Ghana and question is how can put the water without opening the incubator. ..

[@SupliAbi]

Hello There is one small hole in back side you can put in there but it is very hard work to do. I advise open lid put water and close. Fast and easy.

[@muhammadfahimnasir1893]

Lots of water stay on under lid in my incubator please tell me why Lots of water by steam staying in lid

[@SupliAbi]

Hi Because lid is coldest part. Cover lid with towels or blankets to keep hot. Don’t forget to wipe collected water on lid. It not good if dropping to eggs.

[@muhammadfahimnasir1893]

Thanks million 🙏 ❤

[@larryshilling471]

HELP! I have had eggs in for two days. Now, my incubator display , same as yours, states 37.6 c but inside temperature is 47.7 c. I have turned down the CA,,AS,AH,,HS & LS. My CA is set at -9.9 c but the inside temperature is still at 47.7 c and incubator temperature on display is 18.9 c. Is the incubator gone too far or am I not adjusting correctly? Thank you

[@najwach1362]

Hi did the eggs hatch? And how do u prevent chicks from falling?

[@SupliAbi]

Hi Yes they are you can watch it on my play list. kzbin.info/aero/PLr8bn5Tp4PBodO5EHq4HJpfXpn-wr9A2C

[@mariaguzman5503]

My dad’s incubator keep saying “fan” what does that mean

[@theeastwood-youngfamily]

What do I do if I can't get tmy humidity down from 73%? With or without water.

[@SupliAbi]

If humidity goes 73 without water inside dry your room

[@mushiirahburthunkhan1919]

Hello how much you put fan?

[@victorsichone5654]

Can you calibrate the days?

[@mariguerrero5300]

Cuanto es el precios en dolares

[@markobogdanovic233]

I get same incubator. The fan icon appears and disappears. In the place where the temperature is displayed, the numbers and letters change, saying "FAN". the incubator beeps. Can you tell me what the problem is. Also the heating icon appears and disappears. The temperature rises slightly

[@SupliAbi]

Hi you have to disassemble and check fan and heater connection. There must be some problems. If you still have warranty send back and get other one.

[@dubaiwolf]

Hhd headache headache and dead 😭😂 I agree

[@iperu87]

My humidity is stuck at 28, is there something I can do

[@tintinralte9099]

I've already set the eggs but then the roller won't work.please help.!!when the power turned off/on it's working though

[@roadkill.]

Thank you for this video. I have a problem. I sat humidity to 40% but ut wont go over 30%. I filled water in the 4 chambers. Even tryed tog set humidity to 50%. Do you have any idea what i can do tog fix this?

[@SupliAbi]

Hi Put another humidifier in it. water channel is not 4 chambers you filled in. it is two line around fan deep down in incubator. if you pull out plastic mesh under you can see it more clearly. I actually don't fill channel until lock down. i filled 4 chambers as you this keep humidity around 40% then on lockdown day i fill two water channel under. This will rise your hatch rate.

[@roadkill.]

@@SupliAbi, I put in a nother humidifier and I it was big different. The one built in was showing all wrong. Think Im on the Wright path now. Thank you for your answer 😊

[@lidiya2526]

How many days do you keep the turners in before taking them out?

[@faustopacheco8884]

Hasta el dia 18 necesita el volteo los huevos

[@neomiller6770]

How about the turning egg set up! Sir

[@SupliAbi]

Hi There is no egg turning setting in this machine. Lockdown day just take out try and put basket in it. Motor will keep turning. If you want to stop motor too please watch my modification videos in link. kzbin.info/www/bejne/Y4K6i5J5e5tml9U

[@mohammedalmheiri6019]

What is the name of the thermometer.

[@loocywoocy3556]

I have a question please help when the chicks are hatching what do I do? Do I leave it on the yellow holder???

[@SupliAbi]

Hi You have to take try and put eggs to hatching basket in day 18. For more detail please watch my lock down videos in this playlist. kzbin.info/aero/PLr8bn5Tp4PBodO5EHq4HJpfXpn-wr9A2C

[@gringojor]

Hola tengo una igual y me mantiene la umedad de 51 a 55. Alguna recomendación??? Gracias

[@SupliAbi]

Hola If you want rise close around with masking tape but until lock down day this humidity will be no problem. At lock down just add more water and put wet sponge in it.

[@shahidamin1740]

How to control humidity ??

[@SupliAbi]

Hi This incubator don’t control humidity. It have just indicator to show how much humidity in it.

[@shahidamin1740]

@@SupliAbi Then how to increase and decrease the humidity?

[@rufojrplatil5579]

if water containers inside is full and you want to increase the humidity, put another container inside to increase the humidity.if you want to decrease, dont fill all 4 containers and check the indicators if that will satisfy your desired humidity

[@hawwaash]

my heater keep running after it has reached the set temperature , what the solution please

[@Rose-wx2ct]

Hi i have a headache also....Idont know why i cant change day number it says 46 day when i start so i dono how tp.change it🙃

[@SupliAbi]

Hi just press reset button and wait few seconds.

[@andrewzulu1548]

Want to knw your calibration for the first week of incubation

[@SupliAbi]

It depends of weather. Put extra termometer in and use empty for at least one day to calibrate it. Every time you plan to start incubation do this procedure again. There is no best number set and go for it.

[@usmanpervez7053]

What is the maximum temperature for hatching and at what temperature embryo die?

[@CHILLZkryptex]

Embryo will die over 40 .5

[@hawwaash]

The temperature keeps rising, why ?

[@mohdkassim6903]

My incubator like your I put some water but doesn't show water droplets on the upper covering lid and I observe the lid do not cover well it allows air to enter in the machine?? Is this can cause problem in hatching process??

[@SupliAbi]

Close around lid with masking tape as i did. If humidity to high only secure corner with tape.

[@tierzahavier304]

@@SupliAbi s

[@mohdkassim6903]

I have incubator like that I need to know how to restore factory setting on that incubator?? Or how restore day counter ??

[@SupliAbi]

Hi No factory reset for all setting but you can 0 day counter by press reset button for few second.

[@mohdkassim6903]

@@SupliAbi Thanks you I succeed and the day counter comes to 0

[@katherineshannon6058]

My incubator like this will not turn on. Everything is hooked up. But nothing will turn on.

[@abaasstete60]

عندي مثل هذه الفقاسة الاوتوماتيك التدوير لا يعمل اريد حل المشاكل ضروري وشكراً

[@cookieboi4449]

I forgot, I also used a plug pack, 240 vac to 12 vdc,,, for input to the control unit and the 12 vdc fan, and the timer. The motor, the heater uses 240 vac.

[@joeleblanc6617]

My incubator is working fine but how do you turn that buzzer off; it comes on every 2 minutes. How do you add water

[@SupliAbi]

Go humidity settings and set it down as i show in video. Humidity alarm will close. I add water to side pockets which for holding egg trays. This keep humidity aorund 40%. I dont add any water to water channel until lockdown. Lockdown day i fill two water channel this rise humidity around 70%. One more tip is cover lid with towels to keep it warm. If lid cold water rain to the eggs and kill them.

[@Bastien41]

ont peut mettre des œufs d oies dedans ? si oui ! combien merci

[@juniorsandia1687]

I had the same incubator. From 40 eggs i only get 9 chicks. It is a good machine for turning eggs and stopping on day 18. But humidity is super difficult to control. Temperature is not accurate. I need to use mercury termomether. I dont recommend this machine. I just sold it, and I am going to buy russian incubators. British brand Brinses too expensive for plastic. German incubetor Heka too expensive. Italian too expensive. Chinese professional ones cheap, but chinese. Never buy the cheapest incubators. Smethng in the middle or expensive is better. You get 95% rate.

[@stevemangyao4767]

I have the same model...chicks all fully develop but died and did NOT hatched on 21st-23rd day..what could be the problem?

[@SupliAbi]

Hi If membranes dry humidity is low you have to rise humidity in lockdown day. Please watch my lockdown video for more details. If eggs and chick mushy watery humidity is too high. Try dry hatch and cover with towels top lid of incubator.

[@warsahamid3242]

I have an other problm in this type of incubator ...the eggs tray is continuously moveing after 10th days of starting ....any body have solve my problm.....????

[@rabisidiali6323]

Can I hatch goose eggs?

[@SupliAbi]

Yes you can.

[@clintonwilliams7418]

My incubator humidity is always going up I would like get it to set at 45degree how ca I do so.

[@SupliAbi]

Hi Don’t add water it will be 45%

[@TK-zs1tv]

I have a Thermometer to control the temperature. He say 36,4 but i set 37.8?? Who is righ Inkubator or thermometer? The thermometer costs 5 €

[@TK-zs1tv]

Sorry for my English 😂

[@TK-zs1tv]

Sorry for my English

[@SupliAbi]

Hi You have to buy one more small thermometer to put inside. Read that thermometer then calibrate incubators thermometer. If you already have it and you are asking how to understand which one is right? You have to calibrate incubator to inside one and wait until hatch. If hatch start before day 21 this mean your inner thermometer show more then normal temperature . If hatch after day 21 thermometer shows less then normal temperatures. If hatch day 21 all is correct. 😀

[@SupliAbi]

Don’t worry your English good enough.

[@TK-zs1tv]

@@SupliAbi The last chicks hatch on they 20 with this Inkubator.

[@biaritzsiroko6117]

Where do they sell good quality egg incubators? maybe from Germany? or made in Japan? thank you!

[@SupliAbi]

For home use Chinese is better becose cheep and small. All good incubator is big as freezer.

[@biaritzsiroko6117]

I see Borotto Italy has made in Italy incubators but didnt find more info yet..

[@SupliAbi]

Looks good.

[@niyashussain4242]

My incubator Makin lot of alarms how to fix it

[@elvergas2218]

Where do you put the water ??

[@SupliAbi]

Hi If you take out egg tray you can see water channel.

[@user-bi4bx9cd7f]

Factory reset how?

[@gregogregson1640]

why does my humidity keep going up to 66. any help please

[@antesydney1539]

grego gregson hi I have same problem, did u work it out ?? It’s doing my head in this machine

[@gregogregson1640]

@@antesydney1539 no i put it in the bin.these incubators are a waste of space

[@mohammedjameel7808]

What is bottom grid in egg incubator?

[@SupliAbi]

Hi That is support for chick dont fall down after hatching.

[@neomiller6770]

I just buy this incubator yesterday and I don’t know how to setup properly to have a perfect setting of it please someone can help 😔

[@SupliAbi]

Hi I explaining all settings in this video and next part of this videos. Which you can find in my channels playlist. Please watch videos first. Thank you.

[@neomiller6770]

Thanks a lot 😊🙏 more power to you sir!!! God blessed stay safe😊

[@BigBuckinBunzRabbitry]

How does this Incubator turn eggs? I don't think mine is working :/.

[@brandonbennett8853]

Mine is a crap model , only rotates one way and gets stuck .

[@micaelavillagarcia3023]

Hi. I was wondering what should i do if on the first day of incubating the humidity is 69.

[@micaelavillagarcia3023]

Please i really need your help

[@SupliAbi]

Hi Put other humidifier in and see if incubators one is right. If it is right just don’t add water in incubator until lockdown day.

[@micaelavillagarcia3023]

@@SupliAbi thanks for the help!!!

[@SupliAbi]

You welcome

[@dixierose5628]

Problems with the connection on this machine.. loose connection, dosnt fit properly. mine went out in the middle of the night 2 nights ago, no warning no beeps nothing, next morning my eggs were all down to 75* over $100.00 worth of fertilized eggs. Gone I’m sure. I tried piling them in my little Giant (on top of other eggs already in it!) For a few days to see if any would survive. Called seller...this one was a new machine I had only had for about a week, turned it on 3 days prior. Then after I got it full 2nd night it broke. No way it would not come on tried everything. Sold on eBay. ( my son has been burning all box’s and mail trash due to corona virus. Not storing any of them due to germs. So I don’t have the box to send this thing back... I told sellervthis also sent pictures..

[@clairemacumber1146]

would anyone have a copy of the manual to this machine to share with me.

[@SupliAbi]

Hi This machine has no english user manual in factory. They just copied someone's blog and print that as manual and that blog which they copied is not for this model incubator. Few example from user manual will give you better idea: "4.5 I tend to fill both my water channels every 4 to 5 days and at day 18 when I remove the egg trays I over fill them to increase the humidity to about 65%. HD - Default setting is 11 ( I believe its Heat Down power setting, controlling the power to maintain the heater at the desired temperature setting. (incubating temperature adjustment)" As you see above you can read user manual just for fun. This is why i start to make this video series.