In this video you will see how to use MICROSCALE LIQUID DECAL FILM in order to restore bad and old decals.
Пікірлер: 26
@achillesvortex3 жыл бұрын
Ότι χρειαζομουν. Ωραίος! 👍
@jysurferman6 ай бұрын
Nice review Thanks😊
@Spindrift-id1ez3 жыл бұрын
I recently purchased an old resin kit and I've been worried about the old J-bot decals being rather thin and this is the exact product I've been looking for.. Thank you friend :)
@ThatMofoDamon3 жыл бұрын
Πάντα αναρωτιομουν γτ είναι δύο αυτά τα μπουκάλια, τώρα ξέρω τουλάχιστον τι κάνει το ένα. Ωραίος. Κ ακόμα πιο ωραίος, γτ το BBQ στην Ελλάδα είναι προτεραιότητα.😉😉😊
@ScaleModellingHellas3 жыл бұрын
Αν εννοεις το άλλο μπουκαλάκι το SOL είναι για να μαλακώνει τις χαλκομανίες ώστε να ακολουθοπύν την επιφάνεια πανω στην οποία μπαίνουν.
@ThatMofoDamon3 жыл бұрын
@@ScaleModellingHellas ναι αυτό εννοώ. Σκεφτόμουν να τα πάρω κ να τα δοκιμάσω ο ίδιος αλλά τελικά τσιμπίδα το mark fit strong από tamiya.
@stevieboymkii7 ай бұрын
So when using this, you're not using water to remove the decal? I've got a sheet of old decals for a 1/43 Corvette that are breaking apart in water as well. I would have assumed you use this then put in water as normal but is this not the case?
@ScaleModellingHellas7 ай бұрын
Once you apply the Micro Sol liquid, you let it dry. After that you use the decals as always. With water. The only difference is that you must cut tight around the decal so that you avoid the excess film.
@adamserafini69458 ай бұрын
This film will keep the old decals from denigrating once in the water?
@ScaleModellingHellas8 ай бұрын
Yes. The decals were breaking in many pieces once i rinsed them in the water. But the application of this liquid saved the rest of them.
@adamserafini69458 ай бұрын
@@ScaleModellingHellas Thank you for the reply .I will have to get it now .Too many to lose to time and money .
@mikepaling47363 жыл бұрын
Hi ... what do you use to clean your brush after using the "Liquid Decal Film" ?
@ScaleModellingHellas3 жыл бұрын
i used alcohol and than washed it with dish wash soap. It looks fine.
@mikepaling47363 жыл бұрын
@@ScaleModellingHellas Denatured Alcohol???
@ScaleModellingHellas3 жыл бұрын
@@mikepaling4736 The alcohol that we use every day at home.
@markbaigent83732 жыл бұрын
@@ScaleModellingHellas My Brandy😭
@kalypso331 Жыл бұрын
my decals will not adhere to the model.. waht is that you used tthat you brushed on the model?is it an adhesive?
@ScaleModellingHellas Жыл бұрын
I am using Mr. MARK SETTER NEO by Gunze to make decals stick better.
@MrCsainz3 жыл бұрын
Μπορούμε να ρίξουμε 2κ βερνίκι μετά εφόσον στεγνώσουν??
@ScaleModellingHellas3 жыл бұрын
Θοδωρή δεν το έχω δοκιμάσει, οπότε μη σου πω κάτι που δεν ισχύει. Αν κάποιος φίλος γνωρίζει ας μας πει. 2κ είναι βερνίκι αυτοκινήτων;
@davidwozny3484 Жыл бұрын
Hello can i apply this with an aerographe ?
@ScaleModellingHellas Жыл бұрын
I haven't tried it with an airbrush David.
@davidwozny3484 Жыл бұрын
Ok thanks i just do it and it works 👍
@clark38303 жыл бұрын
My friend you are doing it all wrong. cut a decal out of paper and let it soak in water for just a few seconds and the decal will start to lift off paper. Put some of the SET on the area you want to place decal. Now with tweezers move it over onto the spot. Lightly brush the bubbles and liquid out from under the decal. You are done.
@ScaleModellingHellas3 жыл бұрын
Believe me, the minute i tried to move it, it was breaking in parts.
@clark38303 жыл бұрын
@@ScaleModellingHellas to bad this old guy cant email you some pictures of Panerai dials I have done for repairs. Decaling with clear waterslides on inkjets work great.