How to use Miracle Box to flash firmware to Qualcomm Android

Download links & Text format @ forum.hovatek.com/thread-2547...
Drop a comment below if you have questions or reach out to us on the following platforms:
Website: www.hovatek.com
Facebook: / hovatek
Twitter: / hovatek
Google+ : plus.google.com/+Hovatek
00:10
In this video tutorial, I'll be explaining how to flash a Qualcomm Android device's firmware
00:15
using Miracle Box. To do this, you need to have your Miracle box and firmware you intend to flash
00:24
and you need to have installed your Qualcomm USB drivers, we have a guide on how to do that.
00:29
Once you have all these in place, you launch Miracle box and wait for the dashboard to come up
00:40
00:56
Good! Once Miracle box comes up, you click on the Qualcomm tab then you click on the Flashing tab.
01:04
You'll notice that Port is empty so you need to load that entry. To do that, you launch
01:12
Windows start menu and you search for device manager. You just press the Window button
01:18
search for device manager and launch. In device manager, you take note of the Ports.
01:27
that you have available. Now, you boot the device into EDL Mode then you connect it to the PC
01:32
via USB cord. Now, the device should get detected as Qualcomm HS-USB QDLoader 9008
01:47
once you have this, go back to Miracle Box then you click on Port and now, device should get detected
01:55
Next, you untick Auto then click on the Write Flash tab. Now, click the Browse icon in front of Programmer
02:05
and navigate to the firmware folder. In the firmware folder, you select the programmer file
02:14
and you click on Open. Click the browse icon in front of RawProgram, select the rawprogram() file
02:22
click on Open. You do the same for Patch file. Select patch() file, click Open.
02:35
Now, you should have a list of files to be flashed. Tick EDL Mode then click Start Button
02:50
Miracle box should start flashing the files to the device. Sit back and let Miracle box flash
03:04
don't interrupt the process
03:06
04:59
Alright! I have All Done so flashing is complete. You can now disconnect the device
05:06
Now, if you want to flash a specific file to a specific partition, you use the Custom Flasher option
05:17
For that, you click on the Custom Flasher tab. I'll walk you through that quickly.
05:27
In this tab, you untick Auto Programmer. Click the browse icon in front of Programmer
05:43
you select the programmer file, highlight it, click Open. For Files to Write, you click the browse icon
05:55
you navigate to your firmware folder, select the file you wish to flash. For this example, I'll be using boot
06:04
.img so I (click) Open. Under Select Partition, you select boot here.
06:18
06:30
Good! Now, you tick Write Partition then click Start Button.
06:37
wait while Miracle box flashes the file to the partition. So I have Process Done.
06:49
That's how to flash a Qualcomm Android device's firmware using Miracle box

[@John_Smile]

Thanks for this video. I did not know how to use the Miracle Box. I've seen it's always used "prog_emmc_firehose_8909.mbn" for Flash. My phone is Redmi 4x that uses 8937. I tried flashing the ROM with normal writing, but it does not work. I tried it manually, but I did not know what option to choose. I chose "oem", I chose "boot", but the phone does not start after the software installation is over. I'll try and with the method you proposed. Thank you !

[@AmitKumar-iy2oc]

Really working

[@Swenser]

After extracting ofp my filehorse file is of type ELF and not MBN. Android toolbox I think can use elf file. But I can't download ufi Android toolbox.

[@bewareoftheend5067]

Please,Please,Please,Please,Please can I flash the realme x2pro in the same way, and can you upload the required tools for the purpose of downloading it?

[@JavidKhan-qo9jg]

How to read CPU type Qualcomm MDM9307 flash file

[@zacariasfernandochicaia5859]

I need Patch0 for OPPO R9s to flash at once, It´s only I need... Can you send to me?

[@allanwambia7913]

Can data cable be used

[@stolefx]

But where can I find those programmer etc. files in stock from ofp or ozip file when I extract it????

[@chandrakantrajwade8087]

Yes same problem

[@mankindanddestiny7798]

on my Lenovo k5 note a7020a48 I can read the flash but I can't write it same thing for the sp flash tool it says brom error is this some kind of protection

[@HovatekTV]

It would help to know the exact error message. Maybe your phone only accepts flashing signed files

[@jimmynyokabi]

Hi sir... am trying to flash x608 I downloaded file from your site yesterday nd also QFIL but when i try to download it said QFIL fail... plz give solutions thnx

[@HovatekTV]

Use HQXA @ forum.hovatek.com/thread-26553.html

[@udokaamakor2676]

I just wish this Miracle box can flash M028T modem, I flash it with a wrong firmware and it got stocked in it. Now I am looking for a different tool I can use to flash it out. Can it work? Or do you have a suggestion for me?

[@POWER66993]

did you get the soulution

[@believedefor6469]

@@POWER66993 hi boss

[@emekajohn1265]

Im getting error in flashing infinix x622, and the firmware I saw in the forum is kinda old. Probably the problem I got is from the programmer. Pls what can I do?🙏🙏

[@HovatekTV]

Use QFIL from QPST to flash

[@f0xvibes]

does it work for flashing xiaomi mi 10 in edl, without needing of a edl authentification?

[@HovatekTV]

not unless your model is on the supported list in which case, they have the engineer / patched firehose

[@Shaan_a_k]

How to flash mtech ace pro 4g

[@Gzonent]

i need files for bricked samsung a11

[@LECMAX]

Do you have to perform EDL to work with this Box ?

[@HovatekTV]

Yes

[@ronytirkey1198]

can u tell me how to flash twrp porter recovery.img file with miracle box ?

[@HovatekTV]

rename recovery.img to recovery.bin then follow forum.hovatek.com/thread-14106.html

[@ufukyenilmez]

Hi, I have a Microsoft Lumia 640 XL phone. This phone uses the Snapdragon 400 processor. Since Windows Phone support has been end, applications are not supporting (Including Whatsapp). What I want to do is, can I install the software of an android phone uses the same hardware (Snapdragon 400, 1GB Ram etc.) as the Lumia 640 XL, using the Miracle Box in Qualcomm HS-USB Loader mode? I think this situation does not seem impossible. What do you think about this?

[@HovatekTV]

I doubt this will work

[@refinetricks2712]

Sir im using the miracle box cracked, ill tried to flashed my phone but not starting do i need the box to make it work?

[@HovatekTV]

It depends on your chipset and whether or not the device is in EDL

[@fransoa650]

Can i flash without the patch file? Because after i read flash, I try to flash the phone with the backup but i realize there's no patch file in my backup file. And Secondly for the Custom Flasher, let's say i want to flash system, do i hv to select system in Select Partition option ?

[@HovatekTV]

you'll need the Patch file

[@super_exe_file]

@@HovatekTV and what rawprogam file need to flash ???

[@fherrylionheart8490]

can you teach me to make patch.xml and rawprogram.xml for the LG G6 G600KR, my LG G6 is now dead. after finishing flashing to the rom pie ....?

[@HovatekTV]

You'll need some other files to create these I doubt if you have them. Anyway, refer to forum.hovatek.com/thread-31505.html

[@mimaladi5934]

Hello To all experts My HTC Desire d 820 n is blocked on Qualcomm HS-USB QDLoader 9008 I need qfil my HTC D 820 N it's brick so I think I need 3 files to unbrick it, can it tell me where I can find it? 1- prog_emmc_msm8939.mbn 2- rawprogram0.xml 3- patch0.xml THANK YOU

[@zahidnasir3862]

I can't load to edl mode with power + volume buttons..... that's why my phone is not detected by miracle box.... Is there any suggestions how to reboot to edl with miracle box and which drivers will I need

[@HovatekTV]

Refer to forum.hovatek.com/thread-21791.html

[@chocoboy5386]

Can you share me the link of y11(1906) rawprogram and patch file?

[@HovatekTV]

Go to forum.hovatek.com and click Ask Question at the top. Request this and post.

[@Swenser]

How do I unzip ofp firmware file so I can chose the patch programmer files?

[@HovatekTV]

Go to www.hovatek.com/forum and click Ask Question at the top. Request this and post.

[@fransoa650]

Pls i need the how to download checksum for your firmware video

[@HovatekTV]

forum.hovatek.com/thread-23301.html

[@fransoa650]

Thank you so much

[@MajidAnsari-uz3pt]

is progm_emmc_8909 different for different phone if it is so my device is hisense hs u909 and CPU is msm8225 i have download all firehose file because it isn't in my firmware so which file should i select

[@HovatekTV]

some phones require specific programmer files. Have you tried searching for the firmware

[@MajidAnsari-uz3pt]

yes i try and i have downloded it in the firmware there is a mprg.mbn and msimage.mbn file

[@HovatekTV]

@@MajidAnsari-uz3pt take a screenshot of all the contents of the firmware folder then upload to imgur.com . Post the link to the pic(s) here for me to see

[@MajidAnsari-uz3pt]

can you give me your whatsapp no. or this is my whatsapp no. 9079027535 so you can help me

[@josephchea1154]

Can u please send me the link to download this software, pls.

[@HovatekTV]

Check the description

[@simones142]

Hello sir, why my phone is recognized as Quectel QDLoader instead of qualcomm??

[@HovatekTV]

does it show 9008?

[@simones142]

@@HovatekTV yes, 9800..but everytime I try to flash, the phone is never detected

[@nomanahmad1788]

oppo r9m flashing files link

[@shaikasif2312]

How to get in to edl mode in moto G1 (xt-1033) Plz show me the edl points of moto G1.

[@HovatekTV]

Go to forum.hovatek.com and click Ask Question at the top. Request this and post.

[@babzfadipe7841]

Am unable to boot into EDL mode on my Gionee s11 lite, any help?

[@HovatekTV]

Go to www.hovatek.com/forum and click Ask Question at the top. Explain this and post.

[@sabrinaamodeo7129]

hi can you send me the flash files (patch xml0 emmc _program_firehose for samsung grand prime sm-g530fz ) please i need of these files for flashing my phone let me know soon thanks.

[@HovatekTV]

Go to forum.hovatek.com and click Ask Question at the top. Explain this and post.

[@sammyblack155]

hi sir am trying to flash my Samsung s8+ Sm-G950f clone but after i have connected my phone its state downloading boot8 error and also when I try to read the flash the same error so please wat sould i do .any video on how to flash samsung s8+ clone stock rom

[@HovatekTV]

I believe this is a Mediatek device, not Qualcomm. Why not flash using SP Flash tool @ kzbin.info/www/bejne/gqvciot3m9Gghc0

[@fedyybuzghayaa2631]

u.use.odin3

[@gouthamsai1203]

Hello sir My poco f1 shows hs Qualcomm9008 will this work?

[@HovatekTV]

Use Mi Flash tool @ forum.hovatek.com/thread-27300.html but your model might require an authorized Mi account for flashing

[@gouthamsai1203]

@@HovatekTV how to get authorised acout?

[@chocoboy5386]

My Vivo y11(1606) is dead.Because i Wrongly Delete GPT Partition.. So i have to write that Gpt.. So How to write??

[@HovatekTV]

Go to forum.hovatek.com and click Ask Question at the top. Explain this and post.

[@seylig]

how can i boot the device to EDL mode ?

[@HovatekTV]

That varies with device. Take a look @ forum.hovatek.com/thread-21791.html for an idea

[@zeptyspamzzz]

bro how to fix the "error fail to connect with phone make sure you have selected correct port" bro help me ti fix

[@HovatekTV]

Go to www.hovatek.com/forum and click Ask Question at the top. Explain this and post.

[@adelowoabimbola5227]

Patch file is not there after backup. Can I use it without patch on miracle??

[@HovatekTV]

You can generate yours if you have pgpt

[@adelowoabimbola5227]

@@HovatekTV Any video on how to?

[@HovatekTV]

@@adelowoabimbola5227 forum.hovatek.com/thread-31505.html

[@giuseppegottfriedsilvestre7918]

hi, it also works on Sony XZ1 hard brick?

[@HovatekTV]

You would need the firehose file

[@giuseppegottfriedsilvestre7918]

@@HovatekTV thank you, do you have the specific version for the XZ1? I found the test point, but I can’t install the driver qualcomm loader 9008. you have a solution?

[@HovatekTV]

@@giuseppegottfriedsilvestre7918 We don't have the firehose

[@stephenrobinson2967]

sorry bro, i have sharp aquos SH-03J can't detect on miracle box

[@HovatekTV]

Please go to www.hovatek.com/forum and click Ask Question at the top. Explain this and post.

[@John_Smile]

Does not want to work ! ;( " Reading info Timeout Phone not found on Selected Port Read info Skipped. Starting custom flashing task ... Error auto detection failed .. Please manually select programer file .. Process Failed ... restart the program "

[@HovatekTV]

Did you boot the phone into EDL?

[@John_Smile]

Hovatek Not ! My phone is dead! It does not vibrate, it does not light up! Brick. He fell into the water for 5 sec, l think, then he quenched . (forum.xda-developers.com/showpost.php?p=78606812&postcount=617) Pag 62.

[@HovatekTV]

@@John_Smile this is a hardware problem then. Flashing isn't the answer

[@riddler9625]

Where can I download path.xml file

[@HovatekTV]

from device's firmware

[@youme5261]

how to get raw file and patch and firehose for moto xt1602

[@youme5261]

nougat last update

[@HovatekTV]

Go to forum.hovatek.com and click Ask Question at the top. Request this and post.

[@GamePixelVR]

I'm getting Format Error ID 1002

[@HovatekTV]

what's your device model?

[@gsmkings]

How to boot this phone to edl mode I have Coolpad 8297 T01 Is the test point thesame as edl mode

[@HovatekTV]

Test points can help you enter EDL if holding both volume buttons doesn't

[@junastwd4572]

Is this available for Octa core?

[@HovatekTV]

It should work

[@junastwd4572]

@@HovatekTV also,what do i do when im flashing and the firmware and everything are their but theres no scatter file when i go to the firm ware,ive downloaded my firmware from 2 websites and when i use sp flash tool its still desame there's no scatter file (phone-vivo y95)what do i do?

[@HovatekTV]

@@junastwd4572 scatter file is for Mediatek devices

[@yashwinroy1976]

My screen is stuck on reading info

[@HovatekTV]

Did you boot the device into EDL?

[@yashwinroy1976]

@@HovatekTV my device is hard bricked