How To Use or Setup 40A 100A Fake Mppt Solar Regulator

[@sunpeter8260]

Thank you for sharing! I'm quite sure the only thing about MPPT on this controller is the label on the top! When you look inside, this is a pure PWM controller and nothing to do with MPPT except the label on the top!

[@Lenzwalters]

Yea your are correct 👍👍

[@Xman_Devendra_ydv]

Sir can I use 12volt battery,and 24volt solar panels

[@AndreasStuben]

Devendra Yadav On a real MPPT yes you can use a higher voltage PV, on this version not.

[@richarddegen6184]

chinese commie crooks

[@Steven_Rowe]

Great video only one criticism and hopefully a constructive one, so many people have background music which personally I find annoying and unnecessary as I'm interesting in what information you are giving

[@Lenzwalters]

Noted!

[@yulianusrampanangko8156]

Yes.. true

[@marine1718]

And a lot of bad info u can't connect a laptop to a a load

[@irenebaldwin8933]

@@marine1718 You are mistaken, marine. ❤

[@perttukilpelainen4010]

Thank you for very good video. I had one exactly same controller. It was very good with 6W panel in camper trailer. I don’t know ehat happened but when i connected 150W panel that controller started hisss noise. Then display flickered and smoke came. Controller was good i liked a lot. You told nice features how to setup load hours. I think i gonna buy another and test again.

[@Lenzwalters]

You would need 20A at least for 150w .

[@perttukilpelainen4010]

How many ampers this particular controller can handle?

[@anuarnor3318]

10A max 100watt

[@MrMrJabba]

thank you for your explanation,why is there two connections for the solar panel and the battery connection Eg 3.5mm pushing and a screw type?

[@Lenzwalters]

Two connections are for negative and positive..

[@MrMrJabba]

I understand that, but there is a 3.5 jack and a screw for positive and negative as well?

[@esetek]

John Berto you can connect a light bulb on that one👍🏾

[@charlessharp9795]

Some panels come bare wired and others come with a 3.5 plug. This controller is designed to accept either one. Harbor Freight 100w panels are 12v and come with 3.5 plug. It plugs into the left side hole. The right side hole is for Power Out, just like the 2 screws to its left. Same scenario. Some appliances have a plug and some have bare wire. Most 24v panels are bare wire. This controller is supposed to detect which voltage is being used, 12v or 24v, panels and battery bank. DO NOT EXCEED 24v!

[@charlessharp9795]

@Irene You can only use 12v or 24v, not both. Both together creates 36v, which exceeds this controller's abilities. Each voltage requires its own controller. This controller will accept 12v panels or 24v panels and will adjust the output charge according to the battery bank setup as long as it doesn't exceed 24v. As for both types of connections, as long as the panels are the same voltage you can use both.

[@ilakemybike]

I discovered that jointing another battery to the ports of the lamp, the voltage goes under 15,0 volts, so I have the maximum amperes for the exit for the battery, and even a 3 or more amperes for the lamp exit with another battery attached. So, I can recharge two batteries, and the amperes in one day go up from 21 to 35 only for the exit of the battery,

[@88s10Durango]

Even a true Deep Cycle battery should never be discharged to a total less than 50% charge to prolong its life exsistance ,, I have my system set to shut off power at 60% charge .. your 40% will kill the batteries life to fast , I have 6 years on my batteries and their still in great shape ..

[@Lenzwalters]

you are correct the less discharge % is better and would prolong the cycle. knowing certain persons won't study the system until they are out of power i recommend 40% that wont be to bad. sizing system requires with more batteries , some person may be on a small setup, and use out all the battery power.

[@muffdriver69]

Even car batteries are not designed for deep cycle. AGM/GEL okay, because they are redesigned for this purpose, but I would never recommend even a car battery for deep cycle use.

[@djkentcandar4290]

Sir good day how to restart that kind of controller.?

[@Jaemsification]

Sorry sorry I see now that there are subtitles in Italian thanks anyway for posting the tutorial I hope to be able to. remove the moon bye bye

[@derrickdelavega906]

Half moon icon appears and never charge the battery. Any comments how to fix it. Thank you.

[@alaakhalil5084]

Hi . I bought this mppt just to learn more about solar system. How I can know with this charge controller is the battery is full or not. Thanks

[@alaakhalil5084]

Can you help ?

[@Lenzwalters]

The bars for the battery goes up. when all the bars are up battery is full

[@makro1962]

i have a motorcycle battery that has 12volts 3amp , what appliances or device can it load/power?

[@SybilDefense]

A motorcycle?

[@isabelitamandapat9101]

Sir what is a maximum load off, you did not reach the maximum load off 11.9.

[@bennydelacruz1779]

Sir, if I have 12 volts DC lights and 12 volts DC motors. Where should I connect it? Should I connect it directly to the battery or connect it to SCC?

[@Lenzwalters]

do it directly to battery

[@ikwuoguaugustina615]

I am using a 100a charge I am also using a 600w solar panel And one 12v 200a battery How long will it take it to charge on a raining day

[@Lenzwalters]

where are you living ?

[@ikwuoguaugustina615]

Nigeria

[@helentredinnick30]

Hi can you tell me what cable I need for this please

[@cyberdev2000]

It depends on your battery size, load & so on. A 30 amp cable will be the best from panel to controller and the same for the battery, the load may be less but you can still use the same cable if you wish.

[@icepickero]

can i ask i bought this same controller but im trying to run a 24V load do i need a 24V battery?? or is there a setting i need to set for it to run 24V

[@Lenzwalters]

you need a 24v battery. you can use to 12V and make 24V

[@reshairo]

Good info brother, thanx 💞

[@Lenzwalters]

Always welcome

[@craigmcmillan6982]

Hi could u assist me for setting this controller up I have 2 12v solar panels connected 8n series does this turn it to 24 v

[@Lenzwalters]

Hi yes if in series it will be 24V and amp reminds the same. this solar charge controller is designed for 12v/24V

[@SN-dy2um]

Please in Hindi Video upload

[@colindyer6107]

Mine doesn't show amp or amp hour

[@alvinfamador6861]

i bought the same of your controller but my problem is, it is always in 24v. can you teach me how to set it into 12v.

[@Lenzwalters]

Are you using 24V batteries or 24V panels ?

[@elpasobetta]

If you wired the batteries positive with positive then you have a 12v system. If you put positive terminal to the negative of the other battery then you have a 24v system..

[@charlessharp9795]

@@elpasobetta Yes, if you are using 12v batteries. If you already have 24v batteries, you want to wire positive to positive to keep the 24v. Positive to negative will give you 48v. Do not exceed 24v with this controller. it is for 12v and 24v only.

[@richpalmisano1740]

Nice but... i bought this snd its not mppt

[@alankurdish9542]

its mean this charge controller is not mppt?

[@MuratGonullu-l3x]

Davis Kimberly Hall Karen Moore Mark

[@dbagetti]

Is good?

[@Lenzwalters]

yes for small projects/applications

[@lucasokomuniewski6525]

No! Very bad controller!! Do NOT BUY!!

[@SsDiBoi]

U know what u doin don't act like u don't by the red u connected on the negative then in another shot u have like a cut blk extension cord connected and another👎 Lenz

[@SsDiBoi]

this chit is like the states medical marijuana program cause I'm sure anybody who bought this just thought they changed the design n was thinking dis chit luk like a pmw. dem bichz scamming corporately through attorney loop hole advice

[@superayauto7718]

Hey lenz I hook up everything but it show the my pv is off how do I turn it on

[@Lenzwalters]

What type of pv are you using? and is the pv set up correctly?

[@superayauto7718]

@@Lenzwalters the exact same one

[@Lenzwalters]

disconnect the wires and reconnect them. Start in the order with + and then _ for the battery

[@s2oooo]

Mine did this but i think it was because the battery was new and i had fully charged it already. Couple days later after running the diesel heater it was working fine

[@StephenJPayne]

Turn the stupid music off.

[@emiel1976ep]

So as I set load to 12,6v it stops also charging ad that point?

[@Lenzwalters]

No. 12.6V should be load reconnect. your battery would keep charging until ful

[@emiel1976ep]

@@Lenzwalters OK thank you. It is all new for me, so I am looking what to get, to play with. For my bike I got solar panels and a mppt controller that also boost it, so I can charge my batteries as I trafel around. This way, I can camp where I want. For ad home, I want a cheap controller and use the solar panels to charge a small 12v battery that powers some lights ad my front door. Don't need a lot of power and don't want to pull wires everywhere. This controller looks to be good enough for my use.

[@strangescience3414]

Really like this guy....excellent presentation. Answered questions for me that I couldn't find in the manual. Or information that other videos were missing. Thanks.

[@Lenzwalters]

Awesome, thank you!

[@rollinredulla8896]

Good day sir lenz,,can i ask about the battery? Can it be used in a gel type battery and where to put it in b1,,b2,,b3 ? Ple reply and god bless you

[@Lenzwalters]

hi this is lead acid battery which is different battery type basic different setup requirements

[@rollinredulla8896]

@@Lenzwalters tnx

[@emil.honganmaki5461]

this driver is not an mppt driver

[@duothcomputerlearningzone3271]

Thank you for your wonderful video, keep on giving us more.

[@Lenzwalters]

you're welcome

[@pulesjet]

I purchased one of these on E-Bay... NOT a MPPT. In the Process of sending back. Ordered the 60A version. LOL, Yea Right ! The Terminals won't even take 12AWG wire required for 20A operation. DON'T Buy one. On inspection the thing is only a PWM type controller. NO DC/DC conversion Process achieved. No Inductor require that would be required for Buck Conversion on the PCB.

[@Lenzwalters]

yh. i'm in the process out exploring a renogy charge controller

[@Felix-tz1tk]

I tested it. It doesnt have any control over battery. ITs a waste of money. Look for CN3768 12v module, which support trickle charging feature.

[@veliidare714]

ingilizce bilmilorum. lütfen konuşulanları yazılı olarak yayınlayın. translate kullanarak özelliklerini anlayabilirim

[@SybilDefense]

Using this to power lights to to remote quail hutches (to stimulate egg laying in the winter) as well as a circulation pump for the (heated via 110v thermo-controlled bucket heater using a 1000w invertor) winter watering system. I have a separate timer controller that is programmed to come on an hour before sunrise and go off 2- 3 hours after dusk (adjusted for 14 hrs "daylight" pending time of year. I power the 12v timer off the 12v barrel plug. I power the lights with the load lugs, so I can turn this lighting schedule off if desired. I also have a secondary barrel plug male to the load lugs, should I wish to directly power the circulation pump (by passing the inverter which is necessary to use a 110v thermally controlled on/off adapter) should my 200w/190 ah system not be able to keep up with the thermally controlled heater (on at °45) AND the pump, as circulation only draws 2a (heater draws 4.17a) and may be more important than the heater (since my inverter shuts off

[@DaniloMonteagudo]

how do you set this scc to use a lipo4 battery, tia

[@ffarukblues]

I need advice, please: I have a 455W solar panel...I bought BOTH Mppt and Pmw controllers from China (100A)...When I connect the solar panel, the controllers don't accept the panel? The controller shuts down soon?! Thank you very much

[@Lenzwalters]

ensure you wire them correctly. if not there might something wrong with controller

[@ArcanineSpartan]

G’day mate, helpful video, my controller has been set up by previous owner and everything has been working great, but it’s not charging during the day in direct sunlight, just has the moon symbol. Any ideas on how to turn it on to charge with the solar? Everything is connected still

[@Lenzwalters]

reset. unplug battery

[@RacerRed]

Is the “ah” in the third menu showing how many amp hours your battery currently has?

[@asdsdjfasdjxajiosdqw8791]

Wait, so what is fake about this?

[@sharonraleigh9032]

Martinez Timothy Gonzalez Scott Harris Linda

[@nakomarumpus]

This fake charge controller can only handle low amps even with 100A but it is not capable of receiving more than 30A. It's only for those who are new to solar. If you really want to generate a higher current it is best to use a really reliable charge controller.

[@54CHARM]

This is one of the fake Chinese MPPT controller. How could you review such a controller if you don't know what your are talking about?

[@s2oooo]

Fake but i have one and it works perfectly. It's software is very good even if it's not a MPPT 😁

[@54CHARM]

@@s2oooo there is nothing special about the software. It's just a standard PWM charger for which you paid MPPT price 😋

[@s2oooo]

@@54CHARM £15 is cheap 🤣

[@abo_mohammed_dr4851]

This charging regulator is not an MPPT because the company that manufactured it is lying to the consumer and is actually a PWM. If you try to disassemble the device, you will find a small power cord that has been removed So it is a false product and you have bought one from Banggood Market And specifications are false and indicated by its price

[@Lenzwalters]

Yes we know

[@brianlowery5644]

This tells me stuff all. I am looking for proper information to be able to set up a new controller, as an instructional video this is almost totally useless

[@Lenzwalters]

Glad I could help

[@wcgebn]

Not helpfull. Knows no more than I do after 10 mins with the device.

[@richardvandenberg6379]

I was waiting for a big spark haha

[@augustocarballo7537]

Hola, necesito el manual, donde le puedo descargar, gracias

[@quietwon8992]

about time someone explains, thank you. great very helpful!

[@Lenzwalters]

You're welcome!

[@jesuis_jo]

Guys, this is not a MPPT solar charger. It is a fake MPPT.

[@leopoldpoppenberger8692]

stp that sh*tty music!

[@giuseppeguarcello3209]

Per favore sapete dirmi se questo regolatore di carica puo caricare le batterie al gel e sé si come impostarlo b1o b2 grazie sé qualcuno mi risponde

[@modemore1732]

Can anyone please explain to me what a flashing screen mean? I have a 100 amp mppt charge controller, Thank you in advance 🙏

[@Lenzwalters]

can be overload maybe or make sure all your wires connected properly.

[@erae-w3v]

Jones Eric Taylor Michelle Lewis Brenda

[@davoz73]

Why are people commenting that this unit is a PWM unit. Do you guys have x-ray vision? How can you see what's inside? Sure it looks similar on the outside to a PWM but so what. What's on the inside? Give me some facts to go on please.

[@johnq8792]

Check this video to understand better: kzbin.info/www/bejne/ZmaslKmrfpyegJo

[@Elldeeve]

27c is very cool ? That’s hot as in uk. Thx for vid. Helped loads

[@Lenzwalters]

in summer ?

[@bangla-sydney]

Hi Lenz, thank you for the video. I bought exactly the same controller. Not happy to know it's a fake MPPT. Anyway, there is nothing I can do about it now. Just one question I wanted to ask you. When I go through the setup the last option (after the hours of operation selector) is the battery type selector (I think). On mine it shows "b1". I can select b2, b3 and b4. I can't find anywhere what these codes mean. Do you have any idea?

[@blok.8061]

Same here u find answers?

[@JR-kk6ce]

B01 = Gel; B02 = AGM.; B03 = Flooded

[@cameronjames2805]

These are preset settings and can be disregarded.

[@ilakemybike]

I don't Know ... MPPT Solar Charge Controller 50 ah. Solar Panel 100 watt 12 volts monoc. ... battery and battery load ... 5 and more amper hour, MPPT Solar Charge Controller 100 ah Solar Panel 100 watt 18 volts monoc. battery no battery load ... 4 ampere hour. 1 amper more ! During the day : 16 - 14 amperes ( cloudy 4 hours and sunny 5 hours )

[@LouisCeleste]

Moore Christopher White Christopher Thompson Mary

[@sam4malaysia]

Hi. Since this video is long time ago do you still active answering questions ?

[@Lenzwalters]

sure

[@ilakemybike]

" MPPT SOLAR " seems to be a name of a brand, not the kind of product ! And under is written " Charge Controller ". So, it's a Charge Controller, named MPPT SOLAR. It's not a MPPT solar charge controller !

[@jzflmr6089]

ijust put it on - dasnt have ligth sensor? i just use it for lights at night- my old one PWM did have light sensr so mb ill put the other one back i just use 40w solar and 10w light

[@Lenzwalters]

ok kool

[@TheSchwarzenberger]

This is a Fake , this is a PWM Controller

[@davoz73]

Why is it a fake? Because it looks similar to a pwm on the market? I own the similar looking pwm unit and have just purchased this same unit advertised as a mppt, sure they look alike but they aren't the same. Please tell me your comment was based on fact rather than looks!

[@tomtaylor8462]

Some of these pwm are mislabeled as mppt. No big deal they both work. Mppt is better by like 20%

[@ianhow6587]

@@davoz73 open & look inside the controller, if it's real mppt, there should be a donut/rounded wire

[@chriskok]

Has anyone found out if this is a real MPPT or a fake PWM controller?

[@Xman_Devendra_ydv]

Sir can I use 12volt battery and 24watt solar panels

[@Lenzwalters]

Yes merge to 12V batteries together to get 24V

[@zack9633]

Hi, what are the two ports on the right and left at the bottom of the controller where the cables are connected. they look like 3.5 jack ports. also, do you have a link to the user manual for this controller, i have exactly the same

[@walter201175]

Thanks Lenz

[@Lenzwalters]

Any time

[@heroesandzeros7802]

Please tell me how to get 100A through a 10A-30A wire. Even the screw terminals are too small to handle a 2-0 wire for 100A.

[@paulturnbull1459]

Lens, great video, can you send a link to the manual for this model? Thank you

[@Lenzwalters]

send me a email. will send one to you

[@nahimmoreno6135]

@@Lenzwalters hola me puedes enviar porfavor el manual en español del congelador mppt de 100a del vídeo de KZbin

[@obiwanfisher537]

It helped a lot to see it. But I kinda wished to see you connect it to solar power as well.

[@Lenzwalters]

more solar videos coming

[@coreybusby5633]

You have a positive and a negative symbol and a emblem of the solar panel on the device.

[@almave80]

Have it floating mode? Thanks

[@jeffmoss9474]

I have just installed one of these controllers , I set it to stop charging at 14.2v and the display shows it as stopped charging at 14.2v but it KEEPS charging up to 16 volts then stops charging , this voltage is to high for a 12v battery and will fry it after a while . Be wary and check the voltage all the time

[@Lenzwalters]

The float voltage can reach up 14.5V, but it should charge correctly with battery protection , ensure that your is not defective

[@lucasokomuniewski6525]

I Have this same product and went over the 14.6v setpoint and kept trickle charging to 18v!! Destroyed my brand new 100ah li ion battery! Became swollen and ready to explode. Peice of shit.

[@JR-kk6ce]

Best point made so far. From what I can see there is no way from programing it to stop charging the battery. So, it will cook the battery.

[@janusrokkjr4782]

Any on where to add battery balancer / equalizer in the setup, an more on wiring with it serial connected batteries vs. Parallel and if and why it must be serial over parallel when using the balancer. Would be apreciated.

[@frankjaegar1805]

This is a PWM all day of the week. Have a look at it

[@randydicotti3975]

For some crazy reason, the UP and DOWN buttons are reversed on mine. Push UP button to DECREASE and DOWN button to INCREASE ????

[@nathasochavan5054]

My this charge controller load MOSFET is short.i want to change it .But number is not mention on MOSFET .Can you send it .Please help me.

[@lescooper5224]

Thank you I've just got the same one . Very helpful thanks

[@Lenzwalters]

Enjoy it

[@irenebaldwin8933]

Thank you ❤

[@Lenzwalters]

You're welcome 😊

[@tatianaalcantaraconde3091]

Hola, podrías decirme cual sería la configuración para una batería de litio de 100A

[@TobyFallis1]

I have the same solar charge controller what does the PV off mean and how do you change it and is it okay that everything else seems normal but in the top left it says PV off

[@Lenzwalters]

if pv is off no your solar panel is probably not connected properly

[@TobyFallis1]

Why is the title change say fake mppt?

[@zachary4225]

Can you turn off the load at any time by pressing the button? Mine keep the load on even if I try pressing the button to turn it off.

[@OzOmologbe]

I like your teaching, I install Gpower controller few days ago, my challenges is the controller is always on for 24hours and this is not how it suppose to be, controller suppose to off at night and on during d day. How can I rectifier such issue?

[@Lenzwalters]

once its connected to the battery it will be powered, to show you the stats

[@BogdanNicu]

how does this controler knows the capacity of battery in order to charge the battery at 10% of battery capacity? or it just charge the battery at maximum amps the solar panel give? i want to charge a battery which is 55 Ah lead acid but my panel have a max of 11A at 25V

[@Lenzwalters]

the charge controller will test the battery power to know the level and when its fully charged

[@paulwilson5469]

Because I want to use a alternator to charge my batteries them I am not using any solar panel , i am going to use a timer to switch the motor that is going run the alternator on and off

[@bendaddy79]

Hi Lenz thanks for the nice video. I have exactly the same charge controller but i cant put the load off/on as same as your values. Load off i can set only down to 20.2, imposible to set down to for example 10.7 to avoid deep charge. Why??? Also load off same, cant set down only posible to set between 24.0 and 28.0. Strange or? I have 200w solar panel 12v, 12v battery 165ah, charge controller 30ah. Thanks for your help if possible!

[@a-10warthog53]

same issue here

[@JR-kk6ce]

b1= Gel; b2 = AGM' b3 = flooded lead acid

[@JR-kk6ce]

@@a-10warthog53 B01 = Gel; B02 = AGM.; B03 = Flooded

[@tb992]

I have 12.3v showing, however I am unable to get power to the load, any ideas? The wiring is fine as it’s been checked

[@Lenzwalters]

press the button for load on, you'll see the arrow point to it

[@ronnymohdomar8750]

how to use it with inverter? can i attach it to the load with setting 12v on the controller? some ppl say u need to attach inverter direct to battery

[@Lenzwalters]

its better to the battery and yes you can connect to load

[@antoniosspanos2935]

It's better to connect the output on a relay other wise you will burn it like me

[@lyndonp6296]

What is the maximum input voltage this will accept from a PV ??

[@irenebaldwin8933]

The one I own (100A) is for 12volt or 24 volt battery system. Either one, and it should auto-set for the proper one. "In general" , for controllers, if a 24volt battery source is depleted super-low, when you hook it up to the controller it could think its a 12volt source. In that case, you'd need to unhook from the controller and pre-charge up your battery source more from a direct charger. The PV arrays often charge at slightly higher volts than the battery voltage. For example, a 27volt solar panel would be used to charge a 24 volt battery system.

[@lyndonp6296]

@@irenebaldwin8933 Good point, hadn't thought of that.....thanks

[@awaiskhan9713]

Aslam o alekumap k youtub chenal ka sucribar hnm from sindh mai ap key video or aj meny apney gar mai solar controla laghya hai jo b load direct lagta hnm to sara sestem jatka lahata hai aik second mai on hota hai of hota hai controlar key display b ase karti hai

[@keving1774]

Fake mppt video?

[@vusi_FIRE_masilela]

Hi, I have two of those (100w) each and they are working very well. After some days the LCD screen goes blank(shuts down) on both of them, but batteries never run out of power. When I disconnect the negative wire and connect it again, they displays as normal again. Equipment is as follows for each controller: 2 × 200w solar panels for each controller, 78Ah battery (lead acid)

[@Lenzwalters]

you can ground your panels, this may help. but your system should work perfectly. how much amps is your controller ??

[@vusi_FIRE_masilela]

@@Lenzwalters They are 100 Amps (I know they are way too much), planning to get 20A

[@seluronking1]

@@vusi_FIRE_masilela I just bought one of these hooked it up and it worked perfectly for an hour then went blank. I disconnected everything and reconnected and the LCD screen flashed rapidly. Nothing had changed. Have you seen this situation?

[@bridgettetoussaint1738]

How much it cost

[@HelamanGile]

Fake?

[@MarianCobirlie]

I think it's not a ppt because I opened it does not have solenoids and I tested it does not increase its power when it lowers the voltage and has no solenoid inside. are you sure it's ppt?

[@eddisonhe1404]

Marian Cobirlie it should not be MPPT from the housing looking. Just PWM. Many factories made fake MPPT

[@MarianCobirlie]

@@eddisonhe1404hello .Thanks for reply . .!

[@Lenzwalters]

Hi everyone I am skeptical about it, I did some testing with it as you can see here kzbin.info/www/bejne/gnuTnHeshrqLhpo . When i am getting 5+ Amp the controller only tells me its 3 amps

[@MarianCobirlie]

@Bad Grandpa pppt witout solenoid ? Next time bay new one and make test ..thanks !

[@prefereachother]

Junk. Worked short time. No fuse. Opened up and guess what. Fake components inside. Eish. These china'men. Wish i could take a photo

[@adventuresreviews1778]

What what settings to use when using AAG M battery versus a lithium ion false stateif they live in Ireland fall asleep Avenue what's the temperature

[@Lenzwalters]

these controllers are for lead acid type batteries mostly

[@hakeemqasem8451]

I have 200AH gel battery and the solar panels two of 100w and one of 150w and I connected them together by wire 6mm diameter to the (solar charger controller) but I want from you to guide me about the good value of the PV off (the input off for the 200AH battery) and thanks for you 😊 and if you have some advices for this system can yoh give me ❤🌷

[@Lenzwalters]

you should be good you should be atleast using 30w solar controller.

[@jp9523]

Do the battery supply the load?? Or the PV the one who supply it??... I need to set up with this controller, connecting a PV, 12V battery and our project that will be the load... Thanks for reply

[@Lenzwalters]

Yes. and also the pv

[@SsDiBoi]

No don't plug your positive first leave it disconnected until everything is set

[@TheChrislewis1989]

That's what I thought. Every other video shows and says to always do negative first.

[@s2oooo]

@@TheChrislewis1989 it's got built in protection but i thought this as well 🙈