Thank you for this. I bought 20 of them and didn’t know how to make them work because there were no instructions so I didn’t know that the bottom of the bottle had to removed or I had to put an air hole in it.
@honest196618 күн бұрын
This looks good. For large pots with numerous plants should more than one be used. I am wondering long it will last for a 2-week period.
@joycezhu58493 ай бұрын
Thanks soooo much for showing, now I know how to set up my watering spikes for my plants.
@moniquemonicat5 жыл бұрын
Thanks for showing the top can be cut off for easy refilling (instead of having to unscrew the bottle every time). I used your link in your description to place my order.
@IsitWorthit15 жыл бұрын
Glad I was able to help! Hope you like it! Thanks for the support!
@928085884 ай бұрын
Thank you
@elothmanilavandou30874 жыл бұрын
thank you for the instructions
@IsitWorthit14 жыл бұрын
You are welcome !
@kahleanlafave49937 ай бұрын
thank you so much i was struggling because mine did not come with instructions.
@wandaalger68452 жыл бұрын
Well explained. Now I know how to use it.
@IsitWorthit12 жыл бұрын
Glad I could help!
@madmaxcol3 жыл бұрын
Thanks great help, good video.
@IsitWorthit13 жыл бұрын
Glad it helped
@rapheletaferg30325 жыл бұрын
Thanks for explaining. My kit came with little instructions
@IsitWorthit15 жыл бұрын
You are most welcome!
@patriciaedwards228 ай бұрын
Very informative. Thank you ❤
@mamambootybootybooty2 жыл бұрын
Great video and explanation! Might have been nice to show how you filled yours up and how you placed the holes in your bottle to increase airflow. The instructions provided with my kit were pretty poor. One liter bottle didn’t work for me because the screw on cap was too small to attach the device. 2 liter worked great but I had to remove the plastic ring from the bottle screw cap for improved fit and to keep the water from leaking at that connection. I poked holes in the bottom of my bottle to create airflow but I had a terrible time filling the bottle up with water (I think I put too many holes in it!). I’m going to try using another bottle and put only one (maybe two holes only) to see if that allows for easy filling. If that doesn’t work, then I’ll cut the bottom off, cover with plastic wrap (to prevent excess evaporation) and poke holes in plastic wrap holes to increase air flow.
@IsitWorthit12 жыл бұрын
Welcome! Thanks for the feedback!
@missintrovert15952 жыл бұрын
Hey i also have this but my issue is that once the bottle becomes half empty it stops dripping. Did you ever encounter this ?? And did you know how to fix it?
@mamambootybootybooty2 жыл бұрын
@@missintrovert1595 just curious… did you make an air hole in your bottle?
@missintrovert15952 жыл бұрын
@@mamambootybootybooty not at all sadly, i even cut the top incase it needed more air, but alas that didn't help either. With a 1.5 L i discovered that at MOST it will only efficienctly work for 2 days
@Life_in_Shorts2 жыл бұрын
Great video..very helpful Please suggest can plants survive for say 3 weeks with this system?? Please do reply..
@IsitWorthit12 жыл бұрын
I think mine lasted for around 1-2 weeks from what I remember.
@Life_in_Shorts2 жыл бұрын
@@IsitWorthit1 Thank you..
@kkyogish3 жыл бұрын
If the top of the bottle is cut, dust/particles may clog the drip in due course of time.
@IsitWorthit13 жыл бұрын
yeah :(
@HIGHER7RUTH2 жыл бұрын
I would just make a hole That should work
@kkyogish2 жыл бұрын
@@HIGHER7RUTH it doesn’t work. The size of the drop is proportional to the height of the water column above the drip. As water reduces the pressure of water decreases n the water stops dripping.
@HIGHER7RUTH2 жыл бұрын
@@kkyogish i see that sucks
@djmadmike235 жыл бұрын
what camera and setup do you have? This video looks great!
@IsitWorthit15 жыл бұрын
I use Canon g7x mark ii
@neilstevenson75183 жыл бұрын
Good video. I didn’t get instructions with mine. Trying to figure out how fast to set the drip for a majesty palm as I’m going out of town for two weeks. Any suggestions?
@IsitWorthit13 жыл бұрын
Up to your own preference and what kind of plants you have.
@SooSmokie2 жыл бұрын
Don't use these. They are crap. They do not work good enough to leave on vacation
@ncartsyfartsycraftsandsuch3 жыл бұрын
perfect thanks
@IsitWorthit13 жыл бұрын
Welcome! Thanks for watching!
@shaneomack50184 жыл бұрын
I’m curious how it response in the outdoors. I live in Florida and it’s hot and humid all the time.
@IsitWorthit14 жыл бұрын
Maybe need more water? Since its hotter?
@shaneomack50184 жыл бұрын
Is It Worth It? I bought a similar unit and the drip had to be glued to the stem to slow the drip. Over all it did well
@_GarethRossUK5 жыл бұрын
what is the tool used for?you dont have to cut the bottle its optional. where is tool supposed to be used? i see online text said top of bottle but doesnt that mean water escapes those holes? some say bottom of bottle i assume they mean top when kit setup so really bottom, is to release air presure problem?
@IsitWorthit15 жыл бұрын
yeah pretty much to make a hole to let air go thru when it goes down or else it will be stuck and the water wont come out, not the best design to be honest like you mentioned about spilling if there is hole.
@louisferaca92903 жыл бұрын
So basically u poke the holes on top of the bottle once it’s flipped .. 🤦♂️
@Ineedahandle75 Жыл бұрын
Hiw do you get them to start dripping. I adjust the valve but won't start dripping
@shauntellethompson24023 ай бұрын
Mine won’t drip either
@judykarp17125 ай бұрын
I cut the top off of my bottle and all the water just ran out all over everthing and made a mess! So how does that work?
@Tinfoiledhat10 күн бұрын
Lmao wow use your brain. You cut the bottle while empty and just fill it 😂😂
@ambolkar25 Жыл бұрын
Why don’t you show the bottle and how you cut and attach it!!
@somozamaria4 жыл бұрын
Does this use 1 liter water bottles
@IsitWorthit14 жыл бұрын
You can use any water bottle to be honest, just gotta be able to balance with the spikes