Spreadtrum have uart? Is it possible to write/read flash from that bus?
@wesleystoffels9807Ай бұрын
Hi i see your nvitem is also 2,048kb, and writing that to your flash will give you a partition is oversized error. I had to use hex editor and remove all unnecessary parts that the tool created to get it below 1,500kb thats the only way the tool will accept that file. I successfully flashed no network phone with the nvitem back and it brough back the signal. I am now struggling with the exact same phone(nvitem from previous phones back up they are the same but still not getting signal on the second phone). Can you perhaps assist?
@DarkTails256Ай бұрын
i do not have a .pac file. i want to know how to extract the android firmware from the unisoc device. Device is Vortex A24.
@HovatekTVАй бұрын
Please visit www.hovatek.com/forum and click Ask Question at the top. Type your question/request and submit.
@netbat43993 жыл бұрын
can't read flash, operation fail. how to fix?
@benjaminsprint4414 жыл бұрын
Sir mine does not show anything under the (Active Read Flash)
@lawrencebwalya88313 жыл бұрын
What can I do if I flash a device when the flash finished when I power it on still find the same , like password and all user data is still there, what can be the problem with the device?or how can I fix it?
@HovatekTV3 жыл бұрын
the emmc / nand storage is bad
@lawrencebwalya88313 жыл бұрын
@@HovatekTV so how can I fix it
@darcdragonarc2 жыл бұрын
@@lawrencebwalya8831 replace emmc
@next_life Жыл бұрын
How to flash Meberry M7 tab, having sc9863a cpu, unable to find .pac file.
@HovatekTV Жыл бұрын
You need the pac file
@alexeytroshichev13973 жыл бұрын
Thank you for manual. How to explore the resulted bin files? How can I unpack it ? Thank you!
@joeydelmarsjr.646 Жыл бұрын
i tried this on my tablet but there is no firmware available so then i used firmware from a different model but with same hardware board and same cpu model and followed the instructions to make a back up and it failed and killed the tablet wont come back on.
@HovatekTV Жыл бұрын
Go to www.hovatek.com/forum and click Ask Question at the top. Explain this and post.
@FLomasterZ Жыл бұрын
Try same thing with another model and same hardware. It works for my pmt4231 and MEIZU C9 firmware. But it was stuck boot on logo when i use pmt4231_ru pac file. pmt4231_eea works fine and seems it is original fw.
@ZAZADADI-j9p6 ай бұрын
hi dear hope you are very well plz how to restore single partition to spreadtrum model
@HovatekTV5 ай бұрын
www.hovatek.com/forum/thread-28774.html
@ronaldodayas50242 жыл бұрын
Merci boss sof que tu n'a pas mis le lien du fichier PAC
@mujahidulislam6861 Жыл бұрын
I have extracted file of .pac files. How to build a .pac file from that?
@HovatekTV Жыл бұрын
Go to www.hovatek.com/forum and click Ask Question at the top. Explain this and post.
@HorreyForthenewstep2 жыл бұрын
Hello wich files have I to tick to make a complete rom backup ?
@HovatekTV2 жыл бұрын
the ones without file path mentioned in this guide and all with file path
@HorreyForthenewstep2 жыл бұрын
@@HovatekTV ty I'll try that
@HorreyForthenewstep2 жыл бұрын
@@HovatekTV You mean in "flash operation" menu ?
@TranTuan-fs1bp6 ай бұрын
Where is the download link for Firmware.pac,bro?
@HovatekTV6 ай бұрын
You have to search for the firmware for your model
@FLomasterZ Жыл бұрын
Why Spreadtrum fw tool need to write something to read anything? Wtf? Is it possible to boot recovery on their chipsets without writing anything?
@SpeedYOmegaplay-omega3 жыл бұрын
the tool backup the phone's system&boot? or from the pac file?
@SyncIntellect2 жыл бұрын
Thank you for this video. what if I don't have any firmware for the device, and thats why I need to backup it? my device is Adoc T10 tablet with SC9863A.
@HovatekTV2 жыл бұрын
You at least need fdls from a pac file or opt for a box / dongle / ISP tool
@kathyspencer18735 жыл бұрын
bro can i flash a huawie prism u8651t mobile to unlock network and i flashed the wrong file on my samsung j2 prime now it is dead and i cant gi into download mode how do i flash
@HovatekTV5 жыл бұрын
We can help. Go to forum.hovatek.com and click Ask Question at the top. Explain this and post.
@hooplawifiwifi77624 жыл бұрын
hi sir, please tell me how to make a full backup? because i couldnt know the begin addresses and lenght of all files. in base 1 i can find only the begin address of fdl1 and fdl2 but not their size and for the other files i cannot sea the begin addresses. please help
@HovatekTV4 жыл бұрын
Go to forum.hovatek.com and click Ask Question at the top. Explain this and post.
@HorreyForthenewstep2 жыл бұрын
@@HovatekTV your forum is really hard, why don't you give an answer here ?
@samuelfreefire472 Жыл бұрын
hello was needed this video , a doubt that I'm if I can solve I will be very happy I have 1 multilaser tablet M10 4G PRO 32gb ML-SO0G that has this cpu spreadtrum sc9863a unfortunately I do not think your system I can follow your method of this video this will extract the internal rom of your nand . my doubt and this at the moment and then will be to pass back to rom to the device being she not .pac but if you can inform me I'm happy made a great video thank you
@benslimanemustapha8540 Жыл бұрын
Is whrite not read
@kenken-dabolousevenАй бұрын
where did you get your pac file. i need a unisoc sc9832e pac file android 13
@gsmcrack11595 жыл бұрын
Thanks, but how can I convert it to pac file, or use it to flash another device?
@HovatekTV5 жыл бұрын
Here kzbin.info/www/bejne/fHOapJqoqsmLms0
@abdulla43794 жыл бұрын
Help bro, symphony i68 root & twrp share please
@music4adda4 жыл бұрын
How to download
@soultreen Жыл бұрын
por tu culpa tengo el telefono muerto perdi el fdl1 y fdl2 de mi dispositivo Spreadtrum unisoc sc9863a plataforma s9863a3h10 Octa-core Cortex A55 1x4 1.2 1x4 1.6 3gb ram 32 gb android 11 please device dead
@gabontz10 ай бұрын
Will this work for Android head units with Unisoc UIS8581A?
@HovatekTV10 ай бұрын
You'll have to try it
@SouzeKalb3 жыл бұрын
Thnku sir itz working
@Deveshlove4u.5 жыл бұрын
thanks sir
@benjaminsprint4414 жыл бұрын
Sir mine does not show anything under the (Active Read Flash)
@HovatekTV4 жыл бұрын
Go to forum.hovatek.com and click Ask Question at the top. Explain this and post.