How to use RFID with Arduino | How to use the RC522 RFID module with an Arduino - Tutorial

[@evoiboi69]

this did work, my rfid reader did read a card but how did you put led's without showing them i dont want to stare at a serial monitor all day just to see if my card declined

[@jeffbowyer4576]

Concise and informative. Exactly how I like tutorial videos.

[@electronicGURU]

thank you

[@noureenashameer6826]

I am buying Arduino RFID reader kit this weekend 🎉

[@AbdulMoizAdeel-www]

so you should connect directly to arduino instead of motherboard and make sure connections are not loose if your rfid module is not working

[@Gumballation]

Hi sir! Your video is very informative! so is it possible to do this with TCP/IP?

[@officialbalaji3890]

bro resistor value amatha bro

[@Pragadeeshwaran.S]

Thank you so much

[@iswaryakuchimanchi9176]

Hello. My module is not reading the cards. And it says that firmware is unknown.please help me resolve this problem for our project.please

[@VocesSinFronterass]

I have the same problem

[@incognitowriter2240]

Any solution?

[@AbdulMoizAdeel-www]

so you should connect directly to arduino instead of motherboard and make sure connections are not loose

[@ravibharti3433]

Sir I bought rfid card from Delhi but cards not working. We not found UID I'd.

[@ravibharti3433]

@@electronicGURU rfid card cannot be scanned.

[@ravibharti3433]

show approximate your card to the reader on the serial monitor

[@hemalbhatt7221]

Thank you Dear

[@PradeepKumar-zb1dh]

Great video once again 😃

[@LeveluplegendXLLAlt]

best rfid video

[@RandomEditsCo]

How far can the sensor get the key

[@YashJain-qh5tn]

less than 1cm

[@YashJain-qh5tn]

it have very less range to detect and we can't increase it

[@electronicGURU]

yes thats correct

[@kevilysoled5302]

thankyou very much buddy!

[@kingcreatez4827]

hi can i have a schematic for the connections from rfid module to arduino pls

[@electronicGURU]

i already mentioned it in video ? right? what needs to be connected where?

[@kingcreatez4827]

@@electronicGURU yeh you did thanks, but can you send a png file of it pls?

[@electronicGURU]

sorry i Don't have it now , i usually delete it all after video publishing. please take a screenshot from video.

[@PhamViPhuThienB]

excellente

[@diviyaaapmuniandy9503]

how to use RFID with stc 8081 ?

[@Hnzm21]

he is not reading my card

[@incognitowriter2240]

Any solution?

[@mreazen609]

Most probably it is a connection error try pressing it with your finger or push it a little to the front or back while trying to scan

[@SartajSaif]

My error please reply me, 01:47:20.586 -> Firmware Version: 0x0 = (unknown) 01:47:20.586 -> WARNING: Communication failure, is the MFRC522 properly connected? 01:47:20.623 -> Scan PICC to see UID, SAK, type, and data blocks...

[@electronicGURU]

check your connection/wiring

[@shreyakarkun317]

Hii even I am facing the same error please help me

[@tygrisek38]

@@shreyakarkun317 me too bro kzbin.infogaming/emoji/7ff574f2/emoji_u1f62d.png

[@xandermoers8592]

yeah me too

[@shrutirohilla7022]

Me too 🙃

[@kociarz100]

Maby how to buid it?

[@Etrugulosmaneditz548]

Can you help me it says firmware version unknown and its says warning communication failure on Comm 5

[@iswaryakuchimanchi9176]

Did your problem resolve? If so can you help me? It's the same problem for me. Please help us

[@Etrugulosmaneditz548]

@@iswaryakuchimanchi9176 no I just realized you cannot solve this problem you have to buy a new reader

[@avanin_aval]

Sir I have a doubt ,,How we add the information in RFID tag

[@Frizi5516]

Yo there is no info

[@electronic7979]

Very good

[@talhaislam4848]

Please share the code with more than 1 RFid access. or share link if there is any video thank.

[@michalvydareny5284]

here you go pal: just change if condition with authorized access if (content.substring(1) == "(1st rfid tag)" || content.substring(1) == "(2nd rfid tag)"

[@girishpanchal9072]

Hi Can I increase the range of this module upto 1meter?

[@matthewfreeman6187]

Umm no its alot more complicated than that

[@badrulhisyamabdullah614]

Thanks

[@electronicGURU]

your welcome brother

[@vedantugale2646]

Bhai maine sub kuch kia bar bar connection ki par wo card ka uid hiii nahi de raha hai

[@kaushikbhat74]

where are the connections susm

[@駿勝洪]

Firmware Version : 0×0 = (unknown) Is this mean my RFID broken?

[@VocesSinFronterass]

Same problem

[@aryanprakash7371]

can be broken but firmware can be updated using GiT

[@incognitowriter2240]

Tags not detected no output on serial monitor....any solution?

[@JessicaBasnight-b7u]

Sister Radial

[@carsking6732]

mu one is not reading cards

[@hemangpatel6248]

wrong info shown in video you code doesn't show sector data

[@KhaledAhmed-fs2ns]

Hi I would like to contact you I have a job for you

[@electronicGURU]

Well ping me on instagram.

[@KhaledAhmed-fs2ns]

@@electronicGURU Can you contact me on [e-mail] Thanks

[@electronicGURU]

Hi Khaled please mail to me. My mail id is in channel description.

[@harryskay617]

@@electronicGURU hi sir pls I have watch your rfid circuit but I don't see the link to that code please help me to send the link sir

[@harryskay617]

I did not see the link to your code

[@Ollysproductionslol]

#include #include #define SS_PIN 10 #define RST_PIN 9 MFRC522 mfrc522(SS_PIN, RST_PIN); // Create MFRC522 instance. void setup() { pinMode(7,1); pinMode(6,1); Serial.begin(9600); // Initiate a serial communication SPI.begin(); // Initiate SPI bus mfrc522.PCD_Init(); // Initiate MFRC522 Serial.println("Approximate your card to the reader..."); Serial.println(); } void loop() { // Look for new cards if ( ! mfrc522.PICC_IsNewCardPresent()) { return; } // Select one of the cards if ( ! mfrc522.PICC_ReadCardSerial()) { return; } //Show UID on serial monitor Serial.print("UID tag :"); String content= ""; byte letter; for (byte i = 0; i < mfrc522.uid.size; i++) { Serial.print(mfrc522.uid.uidByte[i] < 0x10 ? " 0" : " "); Serial.print(mfrc522.uid.uidByte[i], HEX); content.concat(String(mfrc522.uid.uidByte[i] < 0x10 ? " 0" : " ")); content.concat(String(mfrc522.uid.uidByte[i], HEX)); } Serial.println(); Serial.print("Message : "); content.toUpperCase(); if (content.substring(1) == "F9 D1 F3 6E") //change here the UID of the card/cards that you want to give access { Serial.println("Authorized access"); Serial.println(); //delay(3000); digitalWrite(6,1); delay(200); digitalWrite(6,0); delay(200); digitalWrite(6,1); delay(200); digitalWrite(6,0); delay(200); digitalWrite(6,1); delay(200); digitalWrite(6,0); delay(1000); } else { Serial.println(" Access denied"); Serial.println(); //delay(3000); digitalWrite(7,1); delay(200); digitalWrite(7,0); delay(200); digitalWrite(7,1); delay(200); digitalWrite(7,0); delay(200); digitalWrite(7,1); delay(200); digitalWrite(7,0); delay(1000); } }

[@sumitabiswas5099]

Nice......

[@tomikplayer6719]

THIS IS NOT WORKING I DO IT 545752415456415415 TIMES AND IT DONT WANT TO WORK!?!?!?!?!?!?!?!

[@technolabcreation]

🤩😎🕺🎤🎼🏆🏅🥇❤❤❤❤❤

[@vinhquang2886]

L tutorial