How to use "SUPPORTS" in STAAD Pro

[@CivilBlackBox]

📕 Download FREE eBook "10 Step Process to Creating Your Structural Consultancy Firm" - www.civilblackbox.com/ebook1

[@a.v3467]

You are great sir.

[@vandanabhoite6195]

Hello sir, However I understand all the supports, But on which basis Structural Engineer can assign particular support. When to assign fixed, pinned,fixed but or any other support.For all concrete structure I assigned fixed support.But there is confusion for steel structure whether to use fixed,pinned or fixed but support. Is there is any concept for support of steel structure resting on ground & resting on equipment

[@aravindanr8103]

We need more people like you to share their knowledge without expecting any in return. Nice video on STAAD Supports.

[@CivilBlackBox]

Thank you so much. Please share the channel with your friends and on your social media to support us. Also check out the latest videos on the channel too.

[@neenuchand2057]

At first, I watched static analysis video of yours and then viewed all the videos. Your explanation for each and every topic can't resist me from liking. Too good explanation specially for a beginner.

[@CivilBlackBox]

Thank you so much for your kind words 😊

[@sujitsingh9554]

No dislikes at all. I think it's the perfect video in youtube so far

[@CivilBlackBox]

Hahaha. Thank you so much for such a wonderful message. You made my day!

[@sumansubedi7319]

please make a video on modelling with plinth beam vs modelling without plinth beam!!! Your videos are so informative.

[@CivilBlackBox]

Great suggestion!

[@turbonator8920]

Do video's on response spectrum method in STAAD. Like Joint weight file etc.

[@qureshisiddig9274]

Many thanks for such good lecture In 3d building its recommend to use fixed But type of support So Which degree of fredeem can be release and why

[@sugamjain6332]

very nice video. I just wanted to ask what's the difference between providing the inclined support as 1. Inclined reff. point as Coordinate and 2. Inclined reff. point as Ref

[@vidyaboorugu3907]

Sir very good explanation & please explain what is kfy in fixed but support and how to calculate kfy value

[@firojtasildar6367]

For rcc building design ...while designing beam one by one,which supports should be provided

[@Amit-tf2no]

very informative video sir !!! crystal clear voice!!! thank for uploading!!!

[@CivilBlackBox]

Thanks and welcome

[@sameerpalla]

You are a very knowledgeable person....thanks for making this tutorial. It's really helpful

[@CivilBlackBox]

Thank you so much.

[@sureshverma8784]

Please add a video for design of RCC slab for a load Bearing structure

[@PRAVEENCHARY77]

Creat support: elastic mat ?and plate mat? And modulus value plz for tunnel like draft tube design I arriesed this doubts?

[@murali1802]

How does one differentiate between a Hinged support and a Pinned support? So how should we define a Hinged support in Staad Pro.

[@undhinesh]

HI, I have been waiting for interactive concrete and steel design videos

[@SHUBHAMGUPTAjaimahakal]

The quality of Your lecture is very nice. please Make More videos on Regular intervals. its very helpful sir. Thanks for yours "Support".😀

[@CivilBlackBox]

Thanks Shubham for ur kind words and the beautifully crafted pun..

[@sarathcs23]

Sir is there any staad pro software Link that I can download so that I could do my project

[@syedqasim7867]

This is the information which i am looking out for a long time.Thank you very much sir.keep going on...

[@CivilBlackBox]

Thank you.

[@brahmanandareddy1583]

Hi Sir, Could you please make a video on supports solving 1-2 examples. A bit specific on hinge supports and roller supports when concentrated moments at a point are in action.

[@CivilBlackBox]

Will make a video on this very soon.

[@dennythomasmulavana8694]

Thank you

[@ilustraca]

Sir in case of Steel design if we take Check Code and Select Comman during design then after analysis if our section is not appropriate then Staad pro will be taking the proper one by itself... So in case of Concrete design can we make it happen ? like if our concrete member is not appropriate then how can we tell staad pro to design the proper one for us?

[@CivilBlackBox]

Not really. That only works with Steel Design. You will have to alter the dimensions etc. for RCC members yourself.

[@pranavgupta1416]

I was confused why you chose Mz with Fx when creating a roller support. Shouldn't it be Mx instead of Mz as it corresponds to Fx axis? Thank you.

[@ashkitawaghmode4149]

How to give bolted support?

[@abhilashreddy6131]

Thank you very much sir, your explanation is very clear easy to understand. Keep doing more videos sir it would be very help full 🙏🏻🙏🏻🙏🏻🙏🏻

[@CivilBlackBox]

Thank you so much

[@oladejobioa7626]

How do you determine which support to be used, is it dependent on the type of structure or it is determined by the soil condition. For example if you are design a shelter, do you use fixed or pinned support?

[@CivilBlackBox]

It usually depends on the type of structure and specific support parameters as per your project.

[@kunwarokikitchen4316]

I'm waiting for the concept of 'tension/compression only springs' supports. How we create and assign it?

[@CivilBlackBox]

I will make a video on it soon. If you have an example or problem statement in mind please email it to me and I will make a video on it

[@rayaprolukedarnadh6693]

Sir can you please explain.... How to understand the final staad report and give a final structural drawing...!!?

[@CivilBlackBox]

I will make a video on this topic.

[@nereofibonacci]

Muchas gracias! Excelente video

[@CivilBlackBox]

You are most welcome! 😊

[@devapahade4983]

Sir stad pro ke liye book prefer kijiye To kon kon si book hand me honi chaiye

[@CivilBlackBox]

Here is a list of all the books for Civil Engineering. You can select the books pertaining to Structural Analysis, Strength of Materials, RCC and Steel design for STAAD Pro. www.civilblackbox.com/ebook2

[@haricharan4519]

What are the different types of supports for atena and how to create, explain like these sir

[@CivilBlackBox]

I don't really understand what "atena" means. Can you please rephrase your question?

[@haricharan4519]

@@CivilBlackBox sir atena is a software same like staad

[@CivilBlackBox]

Ohh. Alright. I am really sorry but I don't use atena. I use STAAD and ETABS for all structural designing purpose. I don't think I would be able to help you in this regard. Really sorry!

[@haricharan4519]

@@CivilBlackBox tq u

[@shaiknazma3049]

How to overcome instability at joints in direction fx fy fz mx my mz in steel truss? Please help me sir

[@CivilBlackBox]

I will make a video on that soon. Meanwhile, please share this channel with your friends to help spread the word. 😀

[@parth6675]

Finally ur back, thx sir keep creating more videos.

[@CivilBlackBox]

Just uploaded a video on Earthquake Loads kzbin.info/www/bejne/jZyxq2Ojg5Vrjbs. Please support us by sharing the channel with your friends.

[@aniruddhanarvekar7969]

Sir, in beam top reinforcement is more than bottom when i design a building structure. Which support Is to give to beams? And how

[@CivilBlackBox]

I am not sure I understand your question correctly. Kindly post the question in our Private FB Group with attached images if possible to clarify the question.

[@aniruddhanarvekar7969]

Ok sir

[@sanjeevreddy1756]

Please make videos more sir

[@CivilBlackBox]

Just created a video on Earthquake Loads kzbin.info/www/bejne/jZyxq2Ojg5Vrjbs Please support us by sharing the channel with your friends.

[@theremustbesolution847]

Please make vidio on steadpro connect

[@CivilBlackBox]

You can find the entire course here at : www.civilblackbox.com/sca

[@gabrielpineda9144]

can supports only be added on nodes ?

[@CivilBlackBox]

Yes!

[@SalmanShaikh-xi1wf]

How to assign support in exactly opposite direction ?

[@CivilBlackBox]

Supports don't have direction. They have constraints to movement and rotation. Let me know what you want to achieve.

[@roopasunilkv]

nice improve with practical projects.....

[@CivilBlackBox]

Thank you. Just uploaded a video on Earthquake Loads. Check it out kzbin.info/www/bejne/jZyxq2Ojg5Vrjbs Please support the channel by sharing it with your friends.

[@pranjalsuthar9476]

very good information sir 👌👌

[@CivilBlackBox]

Thank you so much. Please share the channel with your friends to support us.

[@anilkushwaha1985]

But Sir staad not correctly design rcc slab,raft and pile foundation so what the resione and i also cross check with manually method

[@CivilBlackBox]

Well, that is not entirely true. As I said in one of my previous videos, STAAD is just a software. It will design on the basis of the conditions that you impose upon it. I will be making a video on this soon enough and try to compare both.

[@civilmoments5706]

Helpful

[@CivilBlackBox]

Thanks

[@oscarvaronbarbosa9110]

rotate support 90 graddes

[@civilideas1925]

👍🏻

[@sreejithp73s]

Sir what is offset in staad pro What is the use of that? What is effect of offset in analysis and design result When i offset columns the suport not moving what will be the effect of tht? Is tht necessary to use offset for actual results? Please help and make a video on tht Thanks

[@CivilBlackBox]

I will make a video on it soon.

[@fateh_als_auslander9399]

Need help sir,

[@alouesseyashashreejavelosa4564]

How to define spring value for fixed but support?

[@CivilBlackBox]

I will try and explain this in a future video. However, the option of spring value is provided in STAAD.